2013 FORD FUSION Complaints

View complaints related to 2013 FORD FUSION. The complaints found here are submitted by actual consumers with first hand experience. There are more than 1,870 complaints submitted for the 2013 FORD FUSION. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.

  • 2013 FORD FUSION
    - Lancaster, CA

    The transmission keeps jerking and when waiting for a light to change car jerks. Also makes a noise that sounds like water boiling but it is something with the Moter.

    Source: NHTSA WEB SITE
  • 2013 FORD FUSION HYBRID
    - Cary, NC

    The contact owns a 2013 Ford Fusion. The contact stated that while attempting to park, the vehicle became stuck in the reverse position while shifting into the drive position. The contact applied the emergency brakes to prevent the vehicle from reversing. The vehicle was not diagnosed or repaired. The contact referenced NHTSA Campaign Number: 18V471000 (power train) however the recall was not associated with the VIN. The manufacturer was made aware of the failure. The failure mileage was approximately 75,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2013 FORD FUSION
    - Murfreesboro, TN

    While driving, the vehicle flashed the "Service Power Steering" warning. After arriving at my next destination and restarting the vehicle, the alert changed to "Service Power Steering Now", and the power steering became completely unresponsive. According to the dealership, the power steering assist has failed and the entire rack and pinion assembly will need to be replaced, a roughly $2000 repair. After doing some research, this issue has resulted in recalls on other Fords, including Fusions, within the same year model, but not my specific VIN. And judging from the other feedback on NHTSA I'm not alone. It's quite apparent the recall needs to be expanded to include this model.

    Source: NHTSA WEB SITE
  • 2013 FORD FUSION
    - Canton, MI

    Car was parked in the driveway and when started after 4 days, a message came "Active Power Steering Assist Fault". Steering became too hard to operate. This could have happened while driving and would have resulted in a collision. There are recalls for the same issue for 2013 Fusions but not my VIN. I think this recall should be expanded to include more VINs as I am reading similar complaints. Vehicle only has 72000 miles on it.

    Source: NHTSA WEB SITE
  • 2013 FORD FUSION
    - Lakewood, CO

    Our transmission thinks the car is always in drive. It won’t start, and shifts very roughly. There was a recall for this, but not sure why our specific vehicle wasn’t included.

    Source: NHTSA WEB SITE
  • 2013 FORD FUSION HYBRID
    - Murrayville, IL

    The contact owns a 2013 Ford Fusion Hybrid. The contact stated while driving at an undisclosed speed, the steering wheel became difficult to turn. The contact stated there was no warning light illuminated. The vehicle was towed to a local dealer where it was diagnosed with needing the steering assembly replaced. The vehicle was not repaired. The manufacturer was informed of the failure and informed the contact that the VIN was not under recall. The failure mileage was approximately 90,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2013 FORD FUSION
    - Malden, MA

    On 10/31/21 at approximately 7:30 pm my dashboard alerted me with a steering assist fault after making a turn on a rotary on Mystic valley Pkwy Somerville Ma 02144. After entering the rotary my vehicles steering wheel become stiff and hard to move and staring moving towards the left side close to the curbs. I was traveling at around 20mph. I was able to move the vehicle to a near by park that was located on the same street as the rotary (Dilboy stadium). After parking the vehicle, I shut it off and restarted it. After doing so, the alert disappeared and I was able to drive the vehicle normally. After leaving the park 5 minutes later the alert popped back again. I was driving in a straight line so the steering assist did not cause much of a problem, however I could feel the stiffness of the steering wheel. When I arrived to my destination, after performing a left turn my vehicle once again starting leaning towards the left side almost causing me to hit the curb. At around 9:00pm I had towed the vehicle to a Fords dealership. On Monday the 1st I was able to drive the vehicle with same steering wheel conditions to an independent dealership who performed a check and received a fault code of C200D:49 with the solution of replacing power steering rack with module which could only fixed at a Ford dealership due to the module. In the situation described above I was very fortunate that I was not driving at high speed in an area with high traffic, as an accident would’ve most likely occurred. I know that there is no recall on my specific vin however I am aware that other vins with the same year and model have recalls on them. I do not have any other alerts on the car. The fault I came across is a safety hazard not only to myself but other cars on the road. After digging around on the web the steering wheel fault is a common error that a lot of Ford owners come across and I believe that an investigation needs to be launched to protect the safety of drivers and pedestrians.

    Source: NHTSA WEB SITE
  • 2013 FORD FUSION
    - Bluefied , WV

    November 1, 2021 I noticed that all of a sudden the warning light for power steering came on. I managed to get the car to the house and now the steering is locked. I have no remedy. I have been nervous about the car every since. I need my car repaired. The warning should come before all out failure! That’s not a warning it’s an ambush!!

    Source: NHTSA WEB SITE
  • 2013 FORD FUSION
    - Buena Park, CA

    2013 Ford Fusion with 54K miles. The vehicle overheated and the coolant light indicated to add fluid. Fluid was added however, the coolant light keeps coming on to add more fluid. Coolant has been added about every 2 weeks but the level is just below the max fill line each time with plenty of fluid in the unit. The car was taken to Ken Grody Ford (KGF)in Buena Park, CA and the radiator was flushed, and inspection revealed there were no leaks or damages. Within a week the coolant light came back on and was returned to KGF for reinspection. At this time a pressure test was done and we were told the temp sensor and bypass hose needs repair. A Ford Mechanic, not at KF advised this may be related to 2 recalls on the car 17S09, which was supposed to have been addressed in 2019, and/or 12S41 which is an old recall we were never advised of and the repair was not done. Per KGF, 12S41 was never entered in their system for recall, however this was confirmed on NHTSA. Ford Customer Service said they will not repair if it is not in their system and will not review NHTSA to confirm our VIN was impacted. Most complaints on NHTSA regarding cooling have the same symptoms as our car. Both recalls are a safety hazard causing the engine to catch fire and endanger driver/passengers. I have no way of confirming the work was performed as we were previously advised and yet Ford will not take responsibility to ensure the current issue is not related to the recalls and perform the necessary repairs. I was told by a Supervisor, Jennifer, at Ford's Customer Care Line (800-392-3673) that NHTSA must tell Ford to add this to their (Ford's) system in order for it to be addressed.

    Source: NHTSA WEB SITE
  • 2013 FORD FUSION
    - Holly, MI

    The contact's daughter owns a 2013 Ford Fusion. The contact stated while driving at various speeds, excessive force was needed to steer the vehicle. There was no warning light illuminated. Neither the dealer nor the manufacturer was notified of the failure. Upon investigation, the contact discovered NHTSA Campaign Number: 19V632000 (Steering) which he linked to the failure. The vehicle was not repaired. The failure mileage was unknown.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE