2019 GMC SIERRA 1500 Complaints

The contact owns a 2019 GMC Sierra 1500. The contact stated that the wheels on the vehicle were not what was listed in the description of the vehicle. The vehicles installed on the vehicle were 17-inch wheels instead of the 18-inch wheels listed as the original equipment for the vehicle. The contact was concerned that the difference between the OEM wheels and the wheels installed on the vehicle could cause ABS failures while driving the vehicle. The contact referenced NHTSA ID Number: 21V985000 (TIRES), but the VIN was not included in the recall. The dealer was not notified of the issue. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 44,741.

On 2/4/2026, my vehicle (2019 GMC Sierra AT4 and VIN # 3GTP9EED5KG240494) experienced a catastrophic failure of the engine oil cooler lines. This is a well-documented manufacturing defect involving the failure of the crimp joints between the rubber hose and metal tubing. This failure occurred abruptly, causing massive oil loss and posing a severe safety risk due to the potential for sudden loss of oil pressure and engine seizure while operating the vehicle at highway speeds. This specific component failure is recognized by General Motors under Customer Satisfaction Program (CSP) N212326940. GM explicitly acknowledged this failure as a manufacturing defect. Despite the fact that the defect is inherent to the part’s design—and not a result of typical "wear and tear"—GM has denied my request for reimbursement, citing that the vehicle is outside the standard 36,000-mile warranty period. I exhausted all good-faith efforts to resolve this through GMC’s internal escalation process. I spoke with a representative and a supervisor, both of whom refused to honor a reimbursement request based on the manufacturing defect. They refused to consider that the defect, as documented in GM’s own internal bulletins, is independent of mileage and that the repair was performed at an authorized GM dealership. I am seeking full reimbursement of $2,171.58 for the repair of a known, safety-related manufacturing defect. GM is failing to stand behind their "Professional Grade" standards by refusing to cover a part they have already admitted is defective. I request that your office mediate this dispute to facilitate a full refund of my out-of-pocket repair costs.

The contact owns a 2019 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed, and the brakes seized. No warning lights were illuminated. The contact parked the vehicle. The contact inspected the vehicle; however, the failure reoccurred. The contact attempted to drive the vehicle several times, but the failure reoccurred. The contact stated that the failure was persistent. Due to the failures, the contact was almost in two crashes. The vehicle was towed to an independent mechanic, where it was diagnosed with a brake module reset. The independent mechanic contacted the dealer and was informed that the brake module needed to be reset. The technician from the dealer installed the software for the brake module reset, and the vehicle was repaired. The vehicle was retrieved, but the failure reoccurred a month later. The vehicle was towed to the dealer, and the contact was informed that the vehicle needed to be inspected by the engineer. The vehicle was not diagnosed or repaired. The contact was advised to continue driving the vehicle. The contact was advised to disable all the safety features. The contact stated that two major crashes were averted and refused to drive the vehicle until it was repaired. The contact stated that the failure was common with the vehicle. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 68,000.

While driving my 2019 GMC Sierra with approximately 119,000 miles the engine suddenly made a loud bang, started shaking violently, backfiring, and missing out. Took it to dealer. They diagnosed the problem as a rod failure with camshaft damage. Quoted repair cost $12,000. After repair, they were doing a 25 mile test drive before returning the truck to me. After only 20 miles, the engine completely failed. Now it needs an entire new engine. I am waiting for them to reply what the cost is. The truck was maintained exactly as required in the owners manual at General Motors dealers

On Wednesday, January 7th, 2026, my wife and I were traveling North on the Northeast Extension of the Pennsylvania Turnpike (476) at approximately 9:00 pm. A check engine light came on with no other symptoms, we start to get off the next exit. While still on the highway, the motor turns off with a warning to put it in neutral and restart. It would not restart and coasted off the exit and into a convenience store parking lot. There was noise, just turned off. We got stuck in the town for over 2 days before getting a tow 209 miles to the mechanic shop. We were miles from any mechanic shop and tried to troubleshoot while waiting and to no avail. First mechanic had to send it to a second because it looked like the engine had seized and that was confirmed at the second mechanic shop. Apparently the bearings in the lower end seized. The only thing they could offer was to replace the motor. It had proper amounts of fluids and didn't overheat. The motor replacement is approximately $10,800.00 in addition to having no vehicle there was additional towing and breakdown expenses (food and lodging for 2 nights and 3 days)

The DFM program in the engine caused the lifters to fail and bend a pushrod which in turn scared the cam shaft. There were no signs leading up to this. It caused the traction control and brake systems to be compromised. I took vehicle into a gm dealer and had it diagnosed.

Engine loss of power many different engine code took it to the dealership. Now they say lifters, rockers are loose and worn,broken,the cylinder 5 misfire, engine needs rebuild at 88,000 miles. Dealer wants over ten thousand dollars to take apart and repair

While driving 13-15mph down the road the front right upper control arm ball bearing sheared off causing the tire to lean in rubbing the wheel well, forcing my truck to veer to the left across the other lane of traffic. Luckily there wasn't any car next to me.

For the past month I have noticed my truck has been dripping oil, I pulled the shield off and saw my engine oil cooler lines leaking at the crimp points. I’ve seen GM put out customer satisfaction notice but when I tried to have the dealership fix mine they said mine is covered under any recall or warranty. If the line comes uncrimped at highway speeds I’ll lose all my oil where the trucks engine could lock up and lose all forward motion and in my eyes could cause a crash

The contact owns a 2019 GMC Sierra 1500. The contact stated that the vehicle made an abnormal rattling sound while idling. Additionally, while driving at 45 MPH, the message "Reduced Power" was displayed, the check engine warning light illuminated, and the vehicle stalled. The contact was able to coast to the shoulder of the roadway. The vehicle failed to restart and was towed to the dealer, where it was diagnosed and determined that there was no compression in the engine. The dealer determined that the engine needed to be replaced. The dealer advised the contact that the repair was not covered because the VIN was not under recall. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 126,000.