2018 GMC SIERRA 1500 Complaints
View complaints related to 2018 GMC SIERRA 1500. The complaints found here are submitted by actual consumers with first hand experience. There are more than 280 complaints submitted for the 2018 GMC SIERRA 1500. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.
-
2018 GMC SIERRA 1500- Rushville, MO
The contact owns a 2018 GMC Sierra 1500. The contact stated that while turning left at an undisclosed speed, the vehicle lost motive power. No warning light was illuminated. The contact was able to restart the vehicle; however, the failure recurred. The vehicle was taken to the dealer; however, the dealer was unable to duplicate the failure. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 72,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2018 GMC SIERRA 1500- Cuthbert, GA
The contact owns a 2018 GMC Sierra 1500. The contact stated while driving from a complete stop and depressing the accelerator pedal, the engine revved but the vehicle hesitated to respond. There was no warning light illuminated. The contact stated that the failure reoccurred several times. The vehicle was taken to the local dealer, where it was diagnosed that the transmission was slipping and needed to be replaced. The vehicle was repaired. Additionally, the contact stated while driving 60-65 MPH, the vehicle started vibrating and shuddering. The check engine warning light was illuminated. The contact was able to drive to her nearby destination. The vehicle was towed to a second dealer Liberty Chevrolet (105 Cooley Way, Villa Rica, GA 30180) where it was diagnosed that the driver's side lifters had failed and needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The vehicle was towed to a third dealer, Prince Chevrolet Buick GMC of Albany (2701 Ledo Rd, Albany, GA 31707) where it was diagnosed that passenger's side lifters needed to be replaced. Additionally, the dealer diagnosed that the camshaft needed to be replaced. The contact was advised that the warranty would cover a portion of the cost of the repair and she was responsible for the balance. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 84,267.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2018 GMC SIERRA 1500- Strafford, MO
When I’m towing my small boat, my temperature gauge starts to rise on my engine and there are no warning lights and it has caused me to have to pull over. I have told the dealership about this. Everyone seem to act like it’s no big deal but when I’m having to pull over, because I’m afraid my motors getting too hot, it’s a problem. And not only that even when I’m not towing anything my temperature gauge keeps going up then back down up and then back down never in my life have I experienced a vehicle doing this
Source: NHTSA WEB SITE -
2018 GMC SIERRA 1500- Garland, TX
The contact owns a 2018 GMC Sierra 1500. The contact stated that while depressing the accelerator pedal, the vehicle failed to properly accelerate. The vehicle was towed to the local dealer who diagnosed the vehicle and determined that the transmission was faulty; however, the part needed to fix the vehicle was not available. The vehicle was not repaired. The manufacturer was not yet notified of the failure. The failure mileage was 27,477.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2018 GMC SIERRA 1500- Goshen, IN
Loss of dash electrical system and service stabillitrac warning came on when power was restored along with service suspension warning light. Headlights flicker and engine starts powering down before power comes back on by itself. If fuse to suspension is pulled or negative is removed and replaced, all warning lights go away.
Source: NHTSA WEB SITE -
-
2018 GMC SIERRA 1500- Cathedral City, CA
Break system is making scratching noises as if it is a caliber breaking problem or a caliber piston problem, it is also setting off the trailer breaking system light on the dash as well as the trail traction control light.
Source: NHTSA WEB SITE -
2018 GMC SIERRA 1500- Alexandria, VA
Noticed a scraping noise after new, recommended tires installed on my stock truck. Checked the door label to ensure correct tires installed, they were, returned to the tire facility and they recommended I ask a repair facility to investigate. Found that the tires are rubbing the upper control arm when fully turned left or right (both sides affected). Went online to discover that this is a common issue with the 2018 and similar GMC Sierra and Chevy Silverado trucks. This is a safety issue caused by a design deficiency. Two things can happen. One, the tire can fail. Two, the upper control arm could fail, causing the vehicle to be uncontrollable. This could be fixed by restricting the extreme left and right travel in the steering system or redesigning and replacing the upper control arm so it doesn’t interfere with the tire. This is an unacceptable safety issue caused by a design deficiency and needs to be addressed by NTSB now.
Source: NHTSA WEB SITE -
2018 GMC SIERRA 1500- Greenville, NC
Radiator failed. Mileage is under 60k. It is currently being replaced by dealership. Dealer Representative noted that it is a fairly regular occurrence for these models. So much so that the dealership stocks this replacement radiator(hard for me to understand). There was no indicator lights to alert to this malfunction, it was noticed after work one afternoon when coolant was dripping out of the front of the vehicle.
Source: NHTSA WEB SITE -
2018 GMC SIERRA 1500- Mineral Springs, AR
The contact owns a 2018 GMC Sierra 1500. The contact stated while accelerating from a traffic light, the vehicle started hesitating. The contact stated no warning light was illuminated. The vehicle was not diagnosed or repaired. A dealer was not contacted. The manufacturer had not been informed of the failure. The failure mileage was approximately 99,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2018 GMC SIERRA 1500- Little Rock, AR
Transmission failure - the GM manufactured Torque converter on my truck failed to cause the transmission to fail. The internet is rife with stories of the failure of these transmissions on 2018 and 2019 GMC and Chevy Trucks.
Source: NHTSA WEB SITE