2020 GMC SIERRA 1500 Complaints

My engine slowed down on the interstate. My steering wheel was visibly shaking and I lost the steering access control. The truck threw an Cylinder 6 error code. At the mechanic, they identified that at least one of my camshaft lifters had failed. If I had continued to drive my vehicle, the engine block would have eventually locked up.

I was driving my 2020 GMC Sierra 1500 on a local street when the dashboard suddenly displayed a “Brake Failure” warning. I immediately realized I had no braking power and had to safely roll into an uphill parking space to stop the vehicle. While waiting for the tow truck, I researched the issue and discovered there is a known recall related to the brake calipers on some 2020 Sierra 1500 models. However, when I entered my VIN, it showed no open recalls. I also contacted GMC directly, and they confirmed that there are no active recalls associated with my vehicle. Additionally, the vehicle's onboard information system indicated that the front brakes were at 65% and the rear brakes at 80%, suggesting that brake wear was not a contributing factor.

I took my 2020 GMC Sierra 1500 to the dealership after Cylinder #5 seized while driving, and I was forced to replace the entire engine. At the time, I contacted the dealer and was told there was no recall related to this issue. However, I have since learned that GMC has issued a recall for similar engine problems affecting 2021–present Sierra 1500 models, but not for my 2020 model year. I believe this issue may be related and would like further investigation and consideration.

Vehicle currently has 104K and needs a 3rd engine. The same issue happened to the second engine as the first. While Driving the engine just stop working. They say it is a problem with the camshaft. Metal gets into the transmission and that also has to be replaced. A vehicle engine should not just stop working! Especially on an interstate. GMC refuses to add this engine to the recall list. However, I don't understand how the safety of families can continue to be placed in jeopardy.

The contact owns a 2020 GMC Sierra 1500. The contact stated while driving at an undisclosed speed, there was an abnormal knocking sound coming from the engine compartment and the vehicle then failed to exceed 30 MPH. No warning lights were illuminated. The vehicle was taken to the dealer, who were unable to determine the cause of the failure. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling); but the VIN was not included. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 90,000.

Transmission has slipped and shuddered multiple times. We have had it diagnosed at gmc dealership and our mechanic, advising that it is 8L90 transmission failure. It will slip to lower gear abruptly, causing for possible safety issues especially on the highways.

1. On 05/9/25, the exhaust emissions system malfunctioned, triggering diagnostic trouble code P2C7A (exhaust emissions system failure). This repair, the seventh attempt since June 2024, addressed the same recurring emissions issue previously involving replacements of components such as the NOx converter (02/18/25, 03/13/24) and EGR valve (02/18/25). The vehicle is available for inspection upon request. 2. The P2C7A failure risks limp mode, reducing vehicle power unexpectedly, which is hazardous on highways, especially while towing. Exhaust emissions system malfunctions release excessive pollutants, posing environmental and health risks to others. 3. Yes, the P2C7A code was confirmed by dealer during the 05/9/25 repair, following prior confirmations (e.g., 03/31/25–04/05/25. 4. The vehicle was inspected by Young Chevrolet-Cadillac during multiple repairs (e.g., 03/31/25, 05/9/25). 5. Yes, the check engine light and OnStar emissions alerts appeared prior to the 05/9/25 repair, first noted ~June 2024 (P2C7A onset). Exhaust smell and reduced fuel economy were observed intermittently. Symptoms persisted post-03/31/25 repair, leading to the 05/23/25 service.

Loss of power steering. Loss of engine propulsion at high rates of speed. Engine would not start.

Hi I have always taken good care of my 2020 gmc Sierra 1500 at4 6.2 Kept up with its regular and recommended maintenance. I had no warning signs on the dash. So it surprised me that while on my way to work early one morning I was getting off the highway exit and the truck lost power, my steering wheel hardened and it posed a great threat to my life and others on the road, as it suddenly decelerated in a area where people are driving at accelerated speeds. The whole truck was loosing power and shaking hard as I attempted to steer it to a safe location on the side of the road. Had a mechanic inspect it and they determined The truck ended up with a seized engine. I have since not been able to use my truck for 8 months and still currently paying monthly payments of 1000 to pay it off.

The contact owns a 2020 GMC Sierra 1500. The contact stated that while driving 60 MPH, the horn failed to function as intended. There were no warning lights illuminated. The contact stated that on a separate occasion, the right lane sensor stopped working as intended. There were no warning lights illuminated. The contact stated that on a separate occasion, while driving 60 MPH in the rain or on rough asphalt, the rear suspension caused the vehicle to fishtail to the right. The contact turned to the left to control the vehicle. The contact stated that the vehicle returned to normal functionality after the failure. The low transmission fluid warning light was illuminated. The vehicle was taken to an independent mechanic, who diagnosed the vehicle with an electrical systems failure. The independent mechanic informed the contact that there was adequate transmission fluid inside the transmission, and it was unclear why the warning light was illuminated. The contact was informed that weights were added to the wheels to balance each wheel. The vehicle was not yet repaired for the other failures. The contact stated that the transmission was replaced a year prior to the failure, and the horn had failed to function soon after the transmission replacement. The manufacturer was made aware of the failure. The failure mileage was approximately 68,000.