2025 GMC SIERRA 1500 Complaints

Cruise control activates at speeds between 1-5mph, which frequently happens while turning, parking, or going through a drive-through. The cruise control activates by a toggle on the left spoke of the steering wheel, which can be easily bumped while doing low-speed maneuvers like parking. When bumping the toggle, the cruise indicator shows a set speed of 15-18 mph, and the vehicle surges forward trying to attain that speed. Since this occurs while maneuvering to park, it creates a dangerous situation if anyone is nearby and you are unable to react in time. This is an ongoing problem that can be duplicated at will. Rear backup camera very dark at night it’s unusable.

On [XXX], while driving my 2025 GMC Sierra 1500, VIN [XXX], near [XXX], California, the vehicle suddenly experienced a severe brake failure while traveling on a public roadway. When I attempted to apply the brake pedal, the vehicle failed to brake normally and I was unable to safely stop the truck using normal braking. I was forced to reduce speed and allow the vehicle to coast until I was able to enter a side road and bring the vehicle to a stop. I was extremely fortunate that traffic conditions were light at the time. A vehicle traveling in front of me, an intersection, pedestrians, or heavier traffic could have resulted in a serious or fatal crash. After stopping the vehicle, I discovered a metal retaining ring/clip on the floor directly underneath the brake pedal area. At approximately the same time, multiple brake system failure and warning indicators illuminated on the instrument panel. I immediately contacted GMC through the vehicle's SOS system and reported the brake failure. The vehicle was subsequently towed and delivered to a GMC dealership/service department for diagnosis and repair. This appears to involve the mechanical separation or detachment of a component associated with the brake pedal assembly. I have retained the metal component, video evidence of the condition and warning lights, towing information, and dealership repair documentation. A sudden loss of braking caused by the separation of a brake pedal component presents an immediate and potentially life-threatening safety risk. I respectfully request that NHTSA investigate this failure and determine whether similar failures have occurred in other 2025 GMC Sierra 1500 vehicles. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

One evening while driving home from work, the transmission warning light illuminated on my dashboard, indicating that the vehicle would soon stop. The notification specifically stated there was a transmission problem. The following morning, I brought my truck to GMC for service. After running a diagnostic, GMC confirmed an issue with the transmission. A few days later, GMC informed me that they were waiting for a replacement part to arrive. The part did not arrive for almost a month. During this waiting period, I was forced to pay for a rental car. Since my truck was still under warranty, GMC should have covered the cost of the rental car for the weeks my vehicle was awaiting repair.

On July 25, 2026 when starting my vehicle, it began to shake violently and I receive numerous errors, including a check engine light and displays in the infotainment, indicating there were engine and transmission errors with the vehicle. I received a text message notification and in app notification from GMC indicating that there was a critical error and provided error code P0352. This appears to be an error related to a faulty engine, this is the 6.2L V8, which is known to be problematic by GMC. Had this happened while I was driving on the interstate three minutes later, it could’ve resulted in great bodily harm or death to both myself and the general public around me. GMC was later able to reproduce the issue at the dealer, confirming the faulty equipment on the vehicle with less than 16,000 miles on it. The component was replaced by the dealer, however, the vehicle is available for inspection.

The truck when put in parking it still roll forward a little bit. Back up camera can’t not see during night time. Dealership stated they will not solve that problem and tell us to do manually by turn around look back. The suspension really bouncy but the tech stated that is normal. Spoke to other 3rd party tech they said that not normal at all.

The engine shuts off while slowing down. It cuts off cleanly and the entire dash lights up and the transmission shifts to neutral. The driver display says to put the truck in park and hit the start button. After you do this the truck runs fine for about 2k-3k miles and does it again. I has done this 5 times within 10k miles. The dealer says nothing is wrong with the truck because the computer doesn't record any codes. This happens regardless of whether the auto stop/start feature is on or off.

Engine started making a loud knocking noise and it sounded like the engine was about to throw a rod. Turned engine off and called GM. Vehicle was towed to dealership and it was diagnosed with a thrust bearing failure. My truck only had 14k miles on it. To fix the bearing issue, it will need a new engine. GM does not currently have engines to replace the faulty ones so it has sat at the dealership for 3 weeks with No ETA as to when it will be fixed. This is apparently a common problem in the 2025-2026 models LZ0 3 liter diesel. They are still selling these affected vehicles currently, knowing that they may have a problem. GM needs to issue a recall and take these vehicles back.

Going down the highway at highway speeds engine fully seized up almost cause an accident,, totally locked up engine, got towed to dealer and they said total engine failure just like in the priare years., been waiting for a new engine for almost 3month due to these failing on other cars,, they will be replacing my old engine with same engine that in prone to locking up. only a matter of time till the new one does the same thing. i want a buy back but they say it has 70k miles and its over the warranty and they wont buy back

Interior Electrical System / Center Console Wireless Charging Pad The plastic housing surrounding the factory wireless phone charging pad in the center console has visibly melted and deformed. The damage is localized to the area directly above/around the induction charging coil, with no similar heat damage to adjacent console plastics, indicating the wireless charging module itself is the heat source. I stopped using this charging location upon noticing the deformation. This appears to be a component overheating defect that poses a potential fire risk if left in continued use. I am not aware of an existing recall or technical service bulletin covering physical melting of this component (existing GM bulletins address intermittent charging function only, not heat damage to plastic). Requesting this be documented and investigated.

What component or system failed or malfunctioned, and is it available for inspection upon request? The engine/powertrain failed. The vehicle is a 2025 GMC Sierra 1500 equipped with the 6.2L V8 engine. The engine developed a severe knocking noise and loss of power at approximately 5,545 miles. The vehicle was taken to the GM dealership, where an engine replacement was approved. The failed engine/component may be available for inspection through the dealership or GM, depending on whether it has already been removed or returned to the manufacturer. How was your safety or the safety of others put at risk? The engine failure created a safety concern because the vehicle experienced reduced power/loss of propulsion while being operated. This could have put me and other drivers at risk because a sudden loss of engine power can make it difficult to safely maintain speed, merge, tow, or move the vehicle out of traffic. The issue occurred at very low mileage and without enough warning to prevent the failure. Has the problem been reproduced or confirmed by a dealer or independent service center? Yes. The problem was confirmed by a GM dealership. The dealer diagnosed the engine failure and GM approved an engine replacement under warranty. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? The vehicle was inspected by the GM dealership. GM was involved in approving the engine replacement under warranty. To my knowledge, the vehicle has not been inspected by police or insurance representatives. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? Prior to the failure, the vehicle developed a severe engine knocking noise and reduced power/lack of power. These symptoms appeared shortly before the engine failure at approximately 5,545 miles. I do not recall any specific warning lamps or messages before the failure, unless the dealership records