2026 GMC SIERRA 1500 Complaints

GMC SUPER CRUISE MALFUNCTION NO WARNING BEFORE SUPERCRUISE SHUTS OFF PASSING A CAR ON FOUR LANE HIGHWAY (SUPER CRUISE ENABLED) SUPER CRUISE SHUT OFF AND TRUCK CONTINUED HEADING FOR THE CENTER GAURD RAIL.(I CAUGHT IT BEFORE IT BECAME AN INCIDENT). SUPER CRUISE ABRUPTLY SHUTS OFF (NO WARNING) AND WITHIN A COUPLE THOUSAND FEET IT TURNS ON. MY FIRST TIME USING SUPERCRUISE AZ HIGHWAY 87 N BOUND JUST BEFORE RYE AND AZ HIGHWAY 260 BETWEEN PAYSON AND CHRISTOPHER CREEK I CALLED MY DEALERSHIP BUT IT WAS LIKE UH HUH OK I'LL LET GM KNOW.- NO SUPPORT! THE ONLY INDICATOR IS ON THE STEERING WHEEL A RED,GREEN OR YELLOW LIGHT.RED IS OFF-GREEN IS ACTIVE, AND YELLOW LIGHT NO SERVICE. RED LIGHT COMES ON AND SEAT VIBRATES SUPERCRUISE DROPS OUT.

2026 GMC Sierra Elevation X31 with 3.0 Duramax Diesel engine, 132-miles, thrust bearing 1.53-mm out of tolerance requiring engine and turbo replacement. Engine build date 25219 (07 AUG 2025), vehicle assembly date August 2025, purchased 10 OCT 2025, entered service for engine and turbo failure on 11 NOV 2025, returned 10 JAN 2026.

26’ GMC Sierra 1500 AT4 3.0l Duramax experiencing Harsh shifting occurring sporadically while accelerating and deceleration. More frequent and severe during quick deceleration. Severe clunking/rear wheel lock up while reversing. Very repeatable. Truck was a dealer demo and had 2400 miles on it when I bought it last week. Took it in to the dealer today and they said I need a complete new transmission.

2026 Sierra 1500 AT4 with 3.0L Duramax Diesel. Three major issues. 1. 2960 miles, thrust bearing failure caused low oil pressure and internal damage. Vehicle needs complete engine replacement. The truck is still at the dealer with no ETA on engine arrival and replacement. 2. Vehicle has severe electrical issues. battery replaced on second day of ownership due to over charge and smoking. The truck would randomly lose the ability to produce sound through infotainment system on start. This includes warning sounds and audible turn signal sound. Dealer said it’s caused by faulty Amp which was replaced. 3. The truck shut off (full system shutdown) and the transmission failed over to neutral while driving on the highway and failed to restart. Barely restarted on second attempt. Dealer has no idea why it is doing it. However the vehicle was throwing multiple code related to transmission module failure, brake module failure, transmission module failure, etc.

3.0 Duramax Engine Failure - 2026 GMC Sierra 1500 Denali Ultimate at just 6,755 miles and only 77 days of ownership. Within the first few thousand miles, the truck intermittently had warnings appear of “reduced acceleration, drive with care”. The truck would limit its ability to maintain speed. When it occurred during highway driving, it was particularly dangerous. The check engine light would also come on. After parking the vehicle for a bit and restarting it, things returned to normal. At the dealership, we reported the issue and leaned the computer reveled a P06DD code which required them to check the crankshaft for excessive play. Our truck was out of specification requiring complete engine replacement at just 6,755 miles. “Service Bulletin 25-NA-307 which states this code may set due to thrust bearing failure. following 25-NA-307 checked crankshaft end play and got a reading of 0.3400 in. the maximum spec is 0.0124 in.“ GM and Laura Buick GMC should not have sold this truck to us without inspecting it for this known issue. This extensive repair required complete removal of the cab from the chassis.

My 2026 GMC 1500 is equipped with the 2.7L L3B & 8L90 Transmission. At approximately 1000 miles, I noticed that in 2nd between 2700-3200 RPM, a vibration could be felt throughout the cabin and would occur whether with or without throttle application. I am able to recreate the issue during hard acceleration or placing in manual mode. No matter the Vehicle mode selection (sport, normal, snow, tow/haul, etc.), the issue still persists. I took the vehicle to a local GMC dealer at approximately 6K miles to diagnose. I requested that we test drive another 1500 with the same 2.7L and Transmission. They brought out a 2026 Elevation Quad Cab with the 2.7L; less than 20 miles on the odometer.The same vibration was present in 2nd gear at same RPM band. I requested that the issue be escalated to a local GM rep. for further investigation. However the response from the dealer was inadequate and basically stated that no warranty work would be considered because it seems to be “normal operation”.

I saw the report regarding models of Chevrolet trucks not receiving owners manuals from factory. I purchased a 2026 GMC AT4 in early October 2025. It didn't come with a manual either. I emailed my sales person at Ewing GMC in Plano, Texas informing him that it was missing the manual and I was told that GM had decided to only include physical manuals with Denali grade trucks. This didn't make any sense whatsoever. I would prefer to have a physical manual available to reference in the event of vehicle issues.

The contact owns a 2026 GMC Sierra 1500. The contact stated that upon starting the vehicle and shifting into reverse(R), the vehicle failed to move while depressing the accelerator pedal. The contact felt a hesitation while depressing the brake and accelerator pedals, and the contact then attempted to restart the vehicle. The contact restarted the vehicl;e however, while attempting to accelerate, the brakes independently activated. Despite the repeated failure, the contact was able to pull into a gas station to restart the vehicle. The contact stated that after several attempts, the vehicle finally resumed normal operation, and the contact drove the vehicle to the residence. The next day, the contact test drove the vehicle, and the failure reoccurred while the contact was attempting to park the vehicle in a parking spot. The vehicle was taken to a dealer, where a diagnostic test produced 7 fault codes; however, the mechanic was unable to repair the vehicle. The manufacturer was notified of the failure, and the manufacturer stated that there was a communication disconnect between the contact and the dealer. A case was filed with the manufacturer. The vehicle was not repaired. The failure mileage was approximately 300.

I do not have an official communication from the dealer who is servicing my vehicle. However, they have had my vehicle for almost 3 weeks and they tell me that the engine has failed and needs complete replacement. They said the engine lost compression and quit running, it now cranks and does not start. Although the engine has not been disassembled we believe the point fo failure to be in the rotating assembly of the bottom end of the engine.

Ac not working properly. Ac blows air to defrost vents foging front windshield and side windows causing bad visibility