2021 GMC YUKON Complaints

The contact owns a 2021 GMC Yukon. The contact stated that while driving at an undisclosed speed, the vehicle shuddered. The message to restart the vehicle was displayed. The contact stated that the vehicle shut off unexpectedly. Additionally, the check engine warning light was illuminated the day before the failure. The contact stated that while attempting to start the vehicle, the failure reoccurred. The vehicle was taken to Auto Zone and diagnosed with a fuel pump control module failure. The contact was made aware of an undisclosed recall. The contact was referred to the dealer for assistance. The vehicle was not repaired. The vehicle was later towed to the dealer, where it was diagnosed with a failed fuel pump control module. The contact was informed that the fuel pump control module needed to be replaced. The vehicle was not repaired. The contact referenced an unknown recall with a similar failure; however, the VIN was not associated with a recall. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 200,000.

I was driving on the highway, I-55 N just north of Bloomington. I was on cruise control and was coming up to a lane merge going into construction zone. I braked, moved over, turned off cruise control and noticed the engine was cut off and rpm’s dropped to 0. Luckily I was able to get to the shoulder before the highway merged with no shoulder in construction zone. I have the 6.2 L engine in the GMC and have been through propulsion test and 2 oil changes since the test. My engine failed during highway travel and I see on several threads this unfortunately is an unsafe situation others have been in. What are my options as I do not feel safe in a vehicle that will turn off unexpectedly on highway travel.

I previously opened NHTSA Complaint Number11637208 on January 20, 2025 regarding the internal engine failure of my 2021 Yukon Denial XL on January 3, 2025. After filing that Complaint, the engine in my Yukon was replaced by GMC in February 2025. After replacement, the engine was allegedly tested, given an oil cap change, and OK'd by the GMC dealership. On Sunday, April 12, 2026, the replacement engine in my Yukon failed without warning and left me (and my family members, who were also in the Yukon) stranded in the lane of traffic on the westbound College Drive exit of I-10. We had it towed to the GMC dealership (Royal Buick GMC) the same day, they diagnosed it, and according to text communications I received from them on April 14, 2026, the Yukon's engine needs to be replaced again because the engine internally failed - likely due to the failure of the engine's internal rod bearing. No one in my family feels safe in the Yukon anymore. GMC should not be allowed to replace these engines with more faulty engines. If something more is not done soon, people are going to die because of the wrecks caused by these faulty engines.

The vehicle experienced a major engine failure involving the 6.2L engine. The failure appeared sudden and premature and is not consistent with normal wear and tear for a vehicle of this type. Prior to the failure, there were intermittent performance concerns and warning indicators suggesting potential engine or drivetrain issues. The vehicle had previously undergone repair related to similar concerns, indicating a possible recurring problem. The failure created a potential safety risk due to the possibility of loss of power while driving, which could increase the risk of an accident, especially at highway speeds or in traffic. The issue has been confirmed by a service provider, and the vehicle requires significant repair. General Motors has been notified but has declined repair assistance, classifying the issue as wear and tear. While no active recall is currently associated with this specific vehicle, similar vehicles with the same engine platform have documented issues, raising concerns about reliability and safety. The failed components are available for inspection upon request.

2021 Yukon Denali. Inspected by dealer under recall. Passed dealership test and new oil viscosity adjustment completed by dealer at 39k miles. Told no issues with vehicle continue to drive it. Today 4-14-26 on the interstate traveling 75mph the engine seized and lost all power. Instrument panel showed 0rpm as I coasted to a stop and the engine lost all power. I placed the vehicle in park on the shoulder and attempted to restart. Nothing! Engine would crank. Towed to Olathe gmc dealer and they took one looke at it , diagnosed it said it had all symptoms of total engine failure. Ordered me an engine and told 6 weeks out. Sent me home in a loaner. Service department told me They get one everyday sometime more than 1. They have hertz rental on standby for warranty loaner vehicle. I find it spilling that these vehicles come time to be sold. They’re all bad according to the service department. I also find it very frustrating that they park the broken defective vehicles at the very back of the dealer lot to hide the graveyard of 6.2’s from the public. My vehicle is under 5 year 60k warranty and engine is being replaced, but the tech could not share the extent of what would be replaced. All he mentioned was the block. Zero warning engine just went up like a grenade at 75mpg on the highway. Wife’s vehicle and left me stranded 2 hours from home on a work trip.

March 29th 2026 my 2021 Yukon XL engine stalled while driving at 45mph (No prior warning lamps or messages, restart engine came on dash) causing me to immediately pull over and come to a stop still in traffic, it shifted my vehicle into park, I was in an in an un-safe spot and was stuck in park (conditions not correct for shift on dash) because my vehicle would not allow me to shift to neutral and push it to the side of the road, (could not jump start) Had towed to dealership and mentioned Engine Failure and Fuel pump control module Recalls but according to them it was a starter issue, I asked them to still check the fuel pump control module regardless. Picked up vehicle and a week later April 14th the exact same thing happened vehicle stalled while driving dash said Restart Engine while coasting (No prior warning lamps or messages) forcing me to pull over where it rolled to a stop and locked itself into park leaving me in unsafe conditions again. Had towed back to the same dealership and waiting to hear back from them.

The contact owns a 2021 GMC Yukon XL. The contact stated that while accelerating approximately 35 - 40 MPH from a stoplight, the contact believed that the engine was going to seize. The message Low Power Mode was displayed on the instrument panel, and the vehicle went into LIMP Mode. The vehicle was immediately taken to the dealer, who retrieved DTC: P0700, P0776, and P1881. The contact researched and became aware of GMC Recall Number: N22382220; however, the VIN was not included. The vehicle was not repaired. The manufacturer was informed of the failure and confirmed that the VIN was not included. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 167,000.

The contact owns a 2021 GMC Yukon XL. The contact stated that while driving approximately 55 MPH, the vehicle decelerated unintentionally and failed to accelerate above 35 MPH. The vehicle failed to respond when the accelerator pedal was depressed. The contact arrived at the residence and was able to coast into the driveway; however, the vehicle failed to drive forward or reverse. The check engine warning light was illuminated at the time of the failure, with the message “Reduce Acceleration - Drive with Care” displayed. The contact waited for a while and then attempted to move the vehicle, and the vehicle drove forward slowly, and while attempting to reverse(R), the engine revved abnormally but failed to respond. The gear shifter was shifted to drive, but the vehicle failed to respond, and the engine continued to rev until depressing the brake pedal. The vehicle was towed to the dealer, and the contact was informed that the valve body needed to be replaced. The vehicle was not repaired because the part was on back order. The contact researched and associated the failure with NHTSA Campaign Number: 24V797000 (Power Train). The manufacturer was informed of the failure, and it was confirmed that the VIN was not included in NHTSA Campaign Number: 24V797000 (Power Train), and it opened a case. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 82,000.

Lifter and camshaft failure. Metal shards throughout the engine. Engine knocking and uncontrollable shaking. Safety was at risk of myself (driver) and two kids under the age of [XXX] while being broke down on a highway as vehicle was un-drivable. Reviewed by a Chevrolet dealership and Automotive repair shop both agreed on same repairs needed. No warning lights appeared before incident, multiple came up seconds after the problem occurred. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

I was driving my yukon xl with my family and as I was coming to a stop at a stop light my Yukon started to shake violently and make a pinging noise. The check engine light came on and as I drove the car smoke started to come out the exhaust. Luckily I was not on the highway as this could have been a serious safety issue for me and my family. I had my car towed to the dealership and they said the 8th cylinder was completely seized and that it was due to the connecting rod and crankshaft. The engine needs to be replaced. I have maintained my Yukon regularly as recommended by the manufacturer and the car was driving great with no issues or warning of having issues until this engine failure suddenly happened.