2021 GMC YUKON Complaints

Driving on busy road when heard a squealing from the engine bay of the vehicle. Moments later the vehicle lost power. It was a very dangerous situation traveling approximately 45mph on a multi-lane road in urban St. Louis Missouri. There was not a check engine light prior. The vehicle had a recall performed per GMC instructions prior (this amounted to a different viscosity oil....). The breakdown stranded my family and I while on vacation in another city. The vehicle was towed to a local GMC dealership and was diagnosed as a seized engine related to the recall. The engine is scheduled to be replaced as no cost through GMC's extended service. They have not provided coverage for the towing, for the multiple ride shares needed to get around on vacation, for the rental car needed to get home, or a rental car to help us with day-to-day life during the estimated 6-8 weeks we will be waiting. My family was at risk, other motorists on the parkway were at risk. It was pure luck and quick thinking that saved injury or loss of life. It is completely unbelievable GMC is letting these vehicles be on the road for peoples safety and for the money people pay as a consumer.

As I was driving, the vehicle's air conditioning suddenly began blowing warm/hot air. Moments later, the check engine light and all electronic service stability lights illuminated on the dashboard. Simultaneously, the vehicle suffered a complete loss of electronic brake assist, resulting in an extremely hard brake pedal and a severe reduction in braking power. The vehicle also displayed a "No Drive Mode Available" message. Third-party diagnostic scanning revealed network power codes U3018, U3505, P00FF, and P0700, indicating a total loss of power to the Body Control Module (BCM). This is the second life-threatening incident with this vehicle I have experienced following a previous highway engine stall due to engine recall. The vehicle was towed to a GM dealership for diagnostic and emergency electrical repairs.

I am filing a safety complaint regarding my 2021 GMC Yukon. While driving on the highway during a long-distance trip from [XXX] to [XXX], my vehicle suddenly experienced a serious loss of power, drivability issues, and loss of propulsion. The vehicle began shaking violently, slowing down unexpectedly, and struggling to maintain speed while in active highway traffic at highway speeds. At the time of the incident, the vehicle displayed a warning message indicating “Conditions Not Correct for Shift” at approximately 127,506 miles. Shortly after, the vehicle set diagnostic trouble code P0011, which relates to the engine and transmission system not performing as expected and indicates an issue with the Variable Valve Timing (VVT) system affecting engine timing and performance. The vehicle also entered a reduced performance state, and I was advised through the vehicle’s warning system to reduce speed, avoid hard acceleration, and avoid heavy load conditions. Despite following these precautions, the vehicle continued to run poorly and became increasingly unsafe to operate in highway traffic. This created a serious and potentially life-threatening situation, as I was traveling in fast-moving traffic and the vehicle lost normal propulsion and stability. I had to carefully maneuver out of active traffic lanes to avoid a potential collision. The vehicle eventually required roadside assistance/towing due to its inability to operate normally. Diagnostic trouble codes and warning messages were present at the time of failure. After the incident, I checked my VIN through the NHTSA recall system and discovered that my vehicle has three unrepaired safety recalls. Of particular concern is: NHTSA Recall Number: 25V274 GM Manufacturer Recall Number: N252494000 This recall involves certain GM vehicles equipped with the 6.2L V8 L87 engine and describes a manufacturing defect in the connecting rod and/or crankshaft components that may result in engine damag INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA),

The vehicle was driving down the highway when the oil pressure instantly dropped. 2021 Yukon’s safety system advised pulling over immediately, engine warning light appeared, and vehicle turned off. No prior indications of an issue. It would not restart and was towed to mechanic. Independent service center diagnosed issue as a broken crank shaft. It now needs the engine replaced and does not fall under the recall vin numbers acknowledged for the same issue.

On July 28, 2026, while traveling on vacation with my family, our vehicle experienced a catastrophic engine failure. There were warning lights displayed for 30 seconds prior to the engine failure. On July 23, 2026, one day before taking the vehicle to the dealership, the following warning indicators appeared on the dashboard and then disappeared: “Service ESC,” “Service Traction Control,” and a flashing engine light. We took the vehicle to the dealership on July 24, 2026, because we wanted to be proactive and ensure that the vehicle was safe to operate. The dealership inspected the vehicle but reported that no diagnostic trouble codes were identified and no issue was found. We picked the vehicle up from the dealership on the evening of July 27, 2026. On July 28, 2026, while traveling on the highway approximately 2.5 hours from home, the same warning messages appeared on the dashboard again. Because we were traveling at highway speeds and vehicle speed management was becoming an issue, I immediately exited the highway and stopped in a parking area. I placed the vehicle in park, at which point the engine began idling extremely rough. I could feel the vehicle shaking while sitting in the driver's seat. I exited the vehicle to open the hood, but before I was able to do so, I noticed gray smoke coming from the exhaust. We located a GMC dealership approximately two miles away. Because of the vehicle's condition, we drove there slowly on the frontage road at approximately 15 mph and dropped the vehicle off for diagnostic inspection. The GMC dealership subsequently diagnosed the vehicle with catastrophic engine failure and recommended that the engine be replaced. The vehicle remains at the dealership and is available for inspection.We made a reasonable effort to have the vehicle inspected before our trip because we were concerned about the warning indicators and wanted to ensure that the vehicle was safe to travel.

The contact owns a 2021 GMC Yukon. The contact stated that while driving approximately 50 MPH, the check engine warning light started blinking and the vehicle started shaking violently. The vehicle was pulled over to the side of the road and turned off. The vehicle was then towed to a dealer where it was diagnosed with a stuck lifter. The contact was informed that the lifters needed to be replaced. The vehicle was not repaired. The contact believed that the failure was associated with an undisclosed recall number. The manufacturer was notified of the failure. The failure mileage was approximately 100,000.

The contact owns a 2021 GMC Yukon. The contact stated that while driving at undisclosed speeds, the transmission was shifting hard, with severe vibrations and shuddering. The vehicle was taken to the local mechanic, who confirmed the failure and advised the contact to take the vehicle to the local dealer. The vehicle was taken to the local dealer, and the failure was confirmed, but the vehicle was not repaired. The contact stated that the vehicle was previously serviced under NHTSA Campaign Number: 24V797000 (POWER TRAIN); however, the failure occurred. The manufacturer was notified of the failure, but no assistance was offered. The contact stated that the manufacturer had issued a special coverage associated with the failure but offered no assistance. There was no fault code retrieved associated with the previous software update that was performed under the recall campaign. The failure mileage was 78,000.

The contact owns a 2021 GMC Yukon. The contact stated that while driving at an undisclosed speed, there was a misfire coming from the vehicle, the vehicle was shaking and vibrating abnormally before the vehicle went into LIMP Mode. The traction control light and other unknown warning lights were illuminated on the instrument panel. The vehicle was taken to a dealer to be diagnosed. The vehicle was diagnosed with a lifter failure inside the engine. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 86,000.

Knocking sound and flashing engine light came on. When brought to dealership it was determined that lower bearing failure took place requiring full engine replacement. '

The power steering went out. The dealership said it's the rack and pinion. This part is not available anywhere in the United States. I have been waiting over 3 weeks. I feel the part is unavailable as there is an issue with the rack and pinion and others who have the same vehicle ran into the same problem.