2026 GMC YUKON Complaints

vehicle lost power on highway with my sons family in the car. Vehicle was towed to dealer from which it was purchased . outcome was the motor failed and a remedy could be months out with gm only offering a 35/a day rental from enterprise which no vehicle that compares can be rented at that cost.

Nothing has happened yet. However, after only 308 miles… my 2026 Denali is knocking and ticking very loud. Why? How is this possible? We’ve only had it 2 weeks! I have only driven it 5-6 times in the past 14-15 days, too worried that this might happen. But I was reassured by the dealership it wouldn’t. But here I am now. I am so disappointed. Being a Disabled Vet I thought we could have something that we both liked. Now I am upset because I feel betrayed and lied to. I did a video but it’s too large to upload so I can’t get it under 10MB.

In the 2026 Yukons, almost all physical buttons have been replaced by the giant center touchscreen. When starting my vehicle, about a third of the time the screen will not come on, and can’t be turned back on by any means. It will randomly come back on after a few more trips/restarts. This renders several critical systems inoperable. All HVAC does not work, defrosters aren’t available, back up cameras and parking assist is not available, and control of any navigation functions or options (ie heated/cooled seats) are not possible. There are no physical buttons for these items, so there are no other options. Voice commands do not function properly when the screen is black, so no option there. After my third visit to the dealership and an open case with GM, they are finally authorizing a screen replacement. We will see if this fixes it. However, my previous explanations from GM pointed to a nebulous future software release, with no date or detail.

Engine starting clicking during highway drive then engine failed mid-drive and engine was trying to restart on its own mid drive. Vehicle totally stalled out in the street, with numerous attempts the engine did not start. Total mileage on car was 2,900.

2026 GMC Yukon XL Denali, VIN [XXX] , 6.2L V8 L87 engine. At 3,168 miles, vehicle developed rough idle and knocking noise. Delivered to Sewell Buick GMC Dallas on 3/2/26. Dealer diagnosed crankshaft thrust bearing spun. Tech pinpointed bottom-end noise via stethoscope, found excessive metal debris in oil and oil filter. Engine teardown confirmed thrust bearing failure. Required complete engine replacement (GM #xxx), plus oil cooler/radiator, oil cooler lines, torque converter bolts, and all one-time-use parts due to metal contamination. Old engine serial [XXX] , new engine [XXX] . Repaired under warranty 3/9/26, RO #XXX. This is the identical failure mode that caused NHTSA Recall 25V-274 covering ~597,630 L87-equipped vehicles (MY 2021-2024). GM stated manufacturing improvements were completed by 6/1/24 and 2025+ models were not affected. My 2026 model year failure directly contradicts this claim and suggests the defect persists in current production. SAFETY CONCERN: Bearing failure causes sudden complete loss of propulsion at any speed. NHTSA investigation PE25001 notes most failures occur without warning. Loss of power at highway speed creates serious crash risk due to loss of ability to accelerate and reduced power braking/steering. Had this failure progressed further while driving with my family, consequences could have been severe. No crash or injury occurred in this instance. This 2026 model year failure indicates NHTSA's investigation scope should expand to include current production vehicles. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Engine lost power, making noises that sounded like an exhaust leak. Had vehicle towed to dealership. Advised the next day the main bearing had failed and engine needed to be replaced.

The engine started a soft, cyclic tapping sound intermittently on 2/28/26 while I was out of town on a trip. No alerts showed on the GM systems app. On 3/1, while driving home from the trip, the car started hard braking at cruising speed and the engine died and would not restart. I had the car towed to the closest GM dealership and have been told the engine locked up. I just rolled 6000 miles and showed 18% oil life from the original engine oil it came with from the factory. I had been watching the engine problems for years now and waiting for them to be resolved before buying a new GM; only to be lied to that the issue was resolved. Now they're going to install yet another defective engine.

2026 Yukon Elevation with 3,957miles. I was driving down the road and pulled into the turn lane at an intersection. Vehicle cut off with the Auto Start/Stop function and would not start back up. I continued and tried to restart the vehicle but would not start; I was blocking the lane with cars continuously going around me. Vehicle stated service transmission on the display- I was unable to put it into neutral to push it out of traffic; You are only allowed to put it into neutral when crank and couldnt get the accessory mode to come on without the vehicle trying to start. I called the local police department and they sent an officer to direct traffic until a tow truck showed up. Both observed the vehicle not starting. There were no symptoms prior to the vehicle cutting off, only once auto start/stop initiated did the vehicle not restart. Vehicle will be sent back to the dealership tomorrow to resolve this issue. I have dash cam footage of the incident and photos of the display on the screen.

I am submitting supplemental information regarding Complaint #11716907 involving a 2026 GMC Yukon XL AT4 equipped with the Brembo brake package. Following my original submission, GM's Executive Resolution Office provided written clarification of its disclosure position. GM states that the spare tire compatibility limitation associated with the Performance Brake Upgrade is disclosed through a hang tag affixed to the spare tire/wheel assembly mounted beneath the vehicle; and the owner’s manual. GM has not indicated that this limitation appears on the Monroney label, buyer’s order, or delivery documentation. The hang tag provided to me as an example states that the original spare tire/wheel does not fit the front axle when the performance brakes are installed. It instructs that, in the event of a front-axle flat, the consumer must install the spare on a rear wheel position & move a rear wheel to the front axle; and stow the flat tire. The spare tire is mounted underneath the vehicle. The tag is attached to the spare assembly and exposed to road conditions. In my case, when the spare was accessed following a roadside flat tire event, only a small piece of yellow plastic remained. Additionally, no printed owner’s manual is provided at delivery. During my roadside event, the dispatched service provider was unaware of any two-wheel rotation procedure and attempted to install the spare directly on the affected axle. The incompatibility rendered the spare unusable at that time. My concern is that current owners of vehicles equipped with the Performance Brake Upgrade may reasonably assume that a “full-size spare” is compatible with all wheel positions. Unless the undercarriage hang tag remains intact and is specifically read at the time of a flat tire, the incompatibility and required rotation procedure is not apparent. GM has not indicated it intends to notify new or existing owners regarding the spare tire limitation and required rotation procedure.

On [XXX], I was driving on the highway with my family in the vehicle and the check engine light came on, then it started running roughly. I headed off the highway on an exit ramp and the engine died about halfway down the ramp. It wouldn't restart after that. This happened about an hour away from my house in Painesville, OH. I live in Erie, PA. I had to tow it to the nearest GMC dealer. They've since concluded that the engine failed and have ordered a replacement engine from GMC. The yukon only had about 4,900 miles on it. GMC has claimed that their engine problems were fixed for the 2025 and 2026 model years, or else I would not have purchased this vehicle. Obviously there are still major issues and the 2026 6.2L engines need to be recalled. I understand that there is an ongoing investigation into these issues: RQ26001. Please see that the investigators are made aware of this incident. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)