2021 GMC YUKON Complaints

Check engine light comes on and an alert says "acceleration reduced" dealer says the coolant control valve is bad but the engine never overheats but the fans are running max speed 100% of the time.

On May 27, 2026, I was on my way home from work when I went to accelerate the vehicle and all the sudden it started shaking and the check engine light came on with the EBS. I was able to get the vehicle to a repair shop local the next day, who took the car apart. What was thought to be an easy fix of spark plugs and fuel injector, became even more after they put back together and the cylinder was still misfiring. After several hours of taking apart the engine, the mechanic determined that the hydraulic valve lifters had failed. This has been an ongoing issue with with the 5.8L V8. Due to a recall not being under the vin yet, i have now incured a $16k expense to add an engine to it after i purchased it in Nov of 25 at $97,000. This is a saftey issue and luckily no one was hurt when the car started shaking and couldn't go over a certain speed. I want this reviewed and looked at for possible reimbursement as there have been several other vehicles with the same known issue.

The contact owns a 2021 GMC Yukon. The contact stated that while pulling into the yard, the vehicle made an abnormal clanking sound and a hammer-like sound. No warning light was illuminated. The contact stated that the failure was related to NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling), but the VIN was not included. The vehicle was taken to the local dealer, where it was diagnosed with metal fragments inside the engine. The vehicle was repaired, but the failure recurred while driving a month later. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 76,000.

While I was driving home from the grocery store with my 4 kids our 2021 GMC Yukon XL (5.3L V8 engine), the vehicle suffered a sudden, catastrophic mechanical engine failure without warning. The engine began violently shaking, lost major propulsion, and dropped into a severe misfire state when we were coming down the highway. This created an immediate safety hazard on the road, as I suddenly lost the ability to safely accelerate or maintain highway speeds while hauling my children.A certified technician diagnosed the issue as a complete failure of the active fuel management hydraulic valve lifters and bent pushrods, a known manufacturing defect explicitly documented in GM Technical Service Bulletin PIP5776F. The internal failure required a total engine teardown and valvetrain replacement, costing over $10,000 out of pocket.General Motors has failed to issue a safety recall for this specific 5.3L valvetrain defect, despite it causing unexpected engine stalls, severe power loss, and immediate traffic hazards for drivers. This defective component poses an ongoing safety risk to families and should be upgraded to a mandatory safety recall. I am afraid to drive it every time I get on the highway in fear it could shut down again.

I am filing a complaint regarding my 2021 GMC Yukon due to a serious engine failure involving the camshaft, lifters, and crankshaft. The vehicle began exhibiting engine ticking and knocking noises, rough idle, loss of power, and reduced performance. These symptoms progressively worsened and ultimately resulted in major engine damage. The vehicle was diagnosed with failed lifters and camshaft damage, which required extensive repairs. In addition, the crankshaft failed, resulting in catastrophic engine damage and making the vehicle unsafe to operate. These are critical engine components that should not fail prematurely under normal driving and maintenance conditions. The most serious concern is safety. The engine's loss of power and deteriorating performance created the risk of sudden failure while driving. A vehicle that loses power in traffic, while merging, crossing intersections, or traveling at highway speeds can create a dangerous situation and increase the risk of a crash. Occupants and other motorists could be placed at risk if the engine fails without warning. My vehicle has been properly maintained and serviced. Despite regular maintenance, these major engine components failed unexpectedly. I am aware that other owners of GMC and Chevrolet vehicles equipped with similar engines have reported comparable camshaft and lifter failures, suggesting a potential defect rather than an isolated incident. The failure resulted in significant repair costs, loss of vehicle use, and concerns about the long-term reliability and safety of the vehicle. I believe these engine failures may indicate a manufacturing or design defect affecting 2021 GMC Yukon vehicles. I respectfully request that NHTSA investigate camshaft, lifter, and crankshaft failures in the 2021 GMC Yukon and determine whether a safety-related defect exists that warrants corrective action or a recall.

The contact owns a 2021 GMC Yukon. The contact stated that while driving approximately driving 45 MPH and turning onto an exit the vehicle suddenly reduce speed and lost power and the message "Press Start" had displayed. The contact stopped the vehicle and eventually restarted the engine and the vehicle operated as normal. The next day the vehicle was driven to the local dealer who was unable to duplicate the problem and determine the cause of the failure. The manufacturer was not yet contact regarding the failure. The failure mileage was 42,000.

Post-Recall Low Oil Warning + Performance Issues on 2021 GMC Yukon Denali – Campaign 25V274000 Vehicle: 2021 GMC Yukon Denali, 6.2L V8 Recall: 25V274000 Owner: One owner since new (purchased 2021) I had recall campaign 25V274000 performed on my vehicle. This was the first low oil warning I have ever received since purchasing the SUV new in 2021. I have always followed the vehicle’s oil life monitor with no prior issues. The change oil light appeared at roughly 7,500 miles after the recall service (when I already had a service appointment scheduled). About one week later, the low oil warning came on. I had the vehicle towed to the dealership and did not drive it after the warning. Since the recall service, I have also experienced performance issues including noticeable stuttering that was really evident before I towed it in. The dealership initially agreed to a consumption test but later acted like it was not needed, said everything was fine, and were dismissive — blaming me for not following their sticker. I am concerned the recall remedy is not fully effective. Please investigate this matter. Thank you, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2021 GMC Yukon. The contact stated that while driving at an undisclosed speed, the vehicle would independently activate Limp mode and would not accelerate past 30 MPH. In addition, the vehicle would not shift into the Reverse gear as intended. The vehicle was taken to a local dealer, where it was diagnosed with error codes: P0777 and P18A1. The vehicle was not repaired due to parts being on backorder. Upon further investigation, the contact related the failure to an Unknown NHTSA Campaign; however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 90,000.

The contact owns a 2021 GMC Yukon. The vehicle was taken to the local dealer for a routine oil change. While driving, the oil low light illuminated. The vehicle was burning an excessive amount of oil. The local dealer was contacted again, but the vehicle was not diagnosed or repaired. The manufacturer was contacted, who referred to the local dealer. The failure mileage was approximately 149,000.

Engine is misfiring. Took it into local mechanic who mentioned he has seen many similar issues and knew there was a recall for similar 2021 Yukon engine issues but for some reason this model was not included. He encouraged me to trade in the vehicle because most likely the engine would need to be replaced (or a $10,000 repair) and it was not save to continue to drive in this condition. I call GMC and they suggested I contact the NHTSA to request that this year and model be added to the recall listing for other similar Yukon engines.