2021 GMC YUKON Complaints

The contact owns a 2021 GMC Yukon. The contact stated that after restarted the engine and the vehicle did not operate in reverse. During the failure no warning messages had displayed. The vehicle was driven to the local diagnosed that the transmissions needed to be replaced. The manufacturer was notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in the NHTSA Campaign Number: 24V797000(POWER TRAIN). The contact indicated that the vehicle had experienced that same failure listed in the recall. The failure mileage was 70,000.

The contact owns a 2021 GMC Yukon. The contact stated that the vehicle had a rough idle. There was an abnormal ticking and rattling sound detected. The vehicle lost oil pressure. The contact located smoke emerging from the vehicle. The engine light was illuminated. The vehicle was taken to the local dealer, where it was diagnosed with a failure with cylinder five, no compression, and bearing failure. The dealer suggested the engine be replaced. The vehicle was not repaired. The contact indicated that the failure was related to NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling) but was not included in the recall. The manufacturer was contacted who referred to the NHTSA hotline. The failure mileage was unknown.

The vehicle suddenly began vibrating noticeably when idling and at low speeds. About 30 minutes after this started happening a warning lamp lit up. We drove the vehicle about 2 miles to a local auto parts store to get an initial computer diagnosis of the issue. The test resulted in a code of "P0304" which detected a cylinder #4 misfire and recommended a fuel injector replacement. We brought the vehicle to a local mechanic to get the issue further evaluated. After this evaluation, it was determined that the cylinder #4 misfire was related to a lifter failure. The mechanic explained that this situation could possibly have caused more damage, specifically to the camshaft, but that job was bigger than he was willing to take on. He recommended we get the vehicle towed to the dealership for further evaluation. He also informed us that this situation was common with the engine in this vehicle and GMC is aware of it. He directed us to some articles online that elaborated on the potential known issues related to the automatic fuel management (AFM) system and the related engine damage. The vehicle was towed to a local GMC dealership for evaluation. They found the failed cylinder #4 with associated lifter failure and damaged camshaft. We went forward with the repair at the dealership. We asked the dealership about the known engine issues with this vehicle. They acknowledged the widespread issues but informed us that our particular VIN has not been included in any recalls or safety notifications, so we were responsible for the repairs. The vehicle spent nearly 3 weeks at the dealership. One of the parts was on backorder due to a national shortage, which delayed the repair by about one week. That seems to imply that the parts involved in this repair are in high demand, which raises the question of this being a manufacturing/parts issue that may need to be investigated further.

I was driving in the left lane on [XXX] , a 4 lane interstate just outside of Cleveland when i lost engine propulsion. Engine RPMs dropped to under 1000rpm, and quit responding to throttle. I had to change lanes and coast until there was a shoulder available to stall out at while i awaited a tow. No warning lamps until i tried to restart vehicle. Engine cranked but wouldnt start. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

My 2021 GMC Yukon AT4 with a 5.3L engine failed as I was driving down a highway going to my child's ballgame. It put me at risk of wrecking on the highway with other traffic around me as I needed to get my vehicle off the road way. Thankfully, I was able to get the vehicle to a safe spot to get it towed. After having the vehicle towed to my local GMC dealer, they determined my lifters in my engine failed and my camshaft had irreparable damage. GM has a lawsuit going on right now against their faulty lifters in their engines. The dealership told me they recalled the 6.2L engine, but not the others. It is shameful that they haven't recalled the other engines that also have the same lifters with the same active fuel management system. My power trained warranty has just expired and they want to charge me over 15,000 to replace the engine and radiator. I am now fighting with GM to help cover this expense that I feel a recall should take care of. These vehicles are not safe on the road with these faulty engine systems specifically the lifters inside them that are known to fail and GM is aware of this and not doing anything. Please help me and other GM owners get these vehicles recalled and make GM replace these engines at no cost to the owner due to their faulty engine components. My daughter and I could have been seriously been injured or died that day in the highway due to the abrupt engine failure on the highway going 70mph. Thank you for your time and God Bless.

I took my GMC Yukon in for a recall. They changed the oil, programmed my module, changed the cap, and tested the engine, saying it was good. I took it on a trip, 7000 miles later engine locked up.

transmission has been replaced, still having same problems. Actuator was fixed within the transfer case. still shaking. was driven by dealer and told to check again after changing into summer tires. changed into summer tires and still having issues if not worse. separately; the power running boards have never worked - been told its wiring issue. wiring issue is a concern for fire safety.

Vehicle had lifter failure. This could’ve have caused a devastating accident to myself or family which includes my 8 year old daughter. GMC has knowledge of this problem with this motor

The vehicle drove normally earlier in the day with no major drivability concerns. Later, reverse gear suddenly stopped functioning and the engine would rev abnormally without the vehicle moving properly while in reverse. Shortly afterward, while driving, the vehicle displayed the warning message “Reduce Acceleration – Drive with Care” and began losing acceleration and propulsion. The vehicle would not accelerate normally and later could not exceed approximately 20-35 MPH. The condition created a significant safety concern due to sudden loss of acceleration and propulsion while operating in traffic. The engine RPM would increase abnormally while the vehicle failed to respond properly in drive and reverse. An independent mechanic inspected the transmission and found diagnostic trouble codes P0747, P0776, and P0700 related to transmission pressure control and valve body operation. Inspection also revealed significant metal contamination, sludge, and clutch material inside the transmission pan and filter. Reverse and 2nd gear were determined to be failed/burnt internally. The vehicle was later transported to an authorized GMC dealer for inspection. Dealer confirmed reverse gear would not engage even after adding transmission fluid. Vehicle is currently available for inspection.

The vehicle has experienced recurring suspension, drivability, and pulling issues associated with the 4-corner air ride leveling suspension system since early ownership. The first major incident occurred at approximately 4,600 miles when the vehicle displayed suspension warnings and would not accelerate properly past highway speeds. Since that time, the vehicle has repeatedly experienced pulling during acceleration, unstable ride behavior, suspension/leveling concerns, alignment-related issues, and drivability instability. The problem has been reproduced multiple times and documented through approximately 16 repair visits and roughly 74 cumulative days out of service. Dealership service records include repeated suspension inspections, drivability evaluations, wheel alignments, and related repair attempts. The issue remains unresolved and the vehicle is currently back in service again for the same concern. The recurring pulling and instability create safety concerns because the vehicle does not consistently track properly during acceleration and normal driving conditions. Suspension warning messages and drivability symptoms first appeared early in ownership while the vehicle was still under factory warranty. I have also found many similar owner complaints online involving the same suspension system in comparable GM full-size SUV models.