2016 GMC YUKON XL Complaints

The car started to have issues shifting when driving- automatic transmission. It would jolt or shudder to try to shift. I was at a light intersection attempting to turn left to go on the on ramp of a highway, it attempted to shift as I sped up from a stop and it got stuck and started making a sound as if you were to press the brake and gas at the same time, similar to that, a car was coming in my direction at the same time and it finally clicked into gear. Absolutely terrified me, my father in law came and switched me vehicles and took mine to the dealership where it stayed for 3 days and they diagnosed it saying it needed a new transmission, quoting us at $11,000. Obviously we can’t afford that. We had all the filters and lines of the transmission cleaned. And now it’s just gotten worse and worse. That was the first time it happened. Now it’ll shudder like that any time it’s switching gears at any speed. Another time since then, it got stuck in the same situation after pulling out of my kids school driveway, it got stuck and wouldn’t click, when it finally did it started shaking uncontrollably in the street and thankfully I live two streets over and made it to my street before it just shut off on its own. I coasted it right into the front of our house and then it would not come back on, at this time we searched the internet over and over to find try to find an easy fix. We let it sit before it came back on. This is our family vehicle. I’ve seen that many many people have this exact issue with this exact same year and model. Its not coincidental and It’s extremely unsafe. Especially with kids in these vehicles. I’m terrified one day when it gets stuck or shuts off we will get hit.

I bought 2016 Yukon XL 9/2020. At 74k miles (2022), the transmission was replaced by warranty. Now (2025), at 126k miles, the transmission needs replaced again. This can’t be normal.

The transmission is going out and it started with a shudder. The change for the transmission filter and oil was only a temporary fix. It also shifts hard or there is a delay in the shift.

We own a 2016 GMC Yukon XLT Denali with the GM 6.2 engine. On Saturday, July 26, 2025 our vehicle suddenly lost power and became undrivable in traffic. We had it towed to our GM dealership who still has the vehicle (Reiselman GMC- Springfield, TN) They called today and said the engine could not be repaired. They stated it had no compression in Cylinder 8. The said our only option was a new engine. THIS IS THE SECOND CATASTROPHIC FAILURE we have had. In November 2021 we experienced another CATASTROPHIC FAILURE when the vehicle suddenly lost power. The engine required a valve and valve spring and seal on cylinder #1. This is 2 major failures we have had which could have been dangerous had we not been able to get out of traffic. The vehicle currently has 116k miles. These types of major failures in a vehicle that has been serviced according to schedules and receives only typical local and commuter use is out of the norm. It is the first generation of GM's 6.2L engine and the sister engine to the one currently under major recall and no-sell orders. We believe that GM knows of these issues as we have spoken with other people who have had similar problems. The problems involve the valve train and the crank and pistons much like the recall on the later models. Please advise what we need to do to move our complaint through the system to see if we can get some relief on this matter. The dealer still has the vehicle so we don't have any paperwork yet on the latest incident. I will send the November 2021 information

Chest clip does not remain clipped. It releases without pressing the release buttons.

I have repair the trailer brake system warning light prior. Now again this faulty wiring module is constantly dinging and flashing warning messages while driving. It's very distracting and irrelevant considering I not towing anything. It covers the speedometer and is a complete nuisance.

The contact owns a 2016 GMC Yukon XL. The contact stated while driving approximately 70 MPH, the check engine warning light started to flash. The contact stated that the vehicle started to lose motive power. The contact depressed the accelerator pedal, and the vehicle shook violently. The contact pulled off the highway and the vehicle stalled. The contact restarted the vehicle, and the check engine warning light was flashing with DTC: P0300 displayed. The contact stated that the engine was making an abnormal knocking sound. The contact turned off the vehicle and the vehicle towed to the residence and then to a local dealer. The dealer diagnosed the vehicle and determined that a bearing in the cam shaft had failed and had sent metal shavings into the engine. The dealer determined that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The contact researched online and related the failure to NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling); however, the VIN was not included. The failure mileage was approximately 175,000.

The transmission quit working and we were almost in an accident. This is a known issue on the interweb and I think GM needs to step in and help!

In June 2024 I took my vehicle to the dealership for a ticking/clacking noise. The dealership determined lifter failure and that the engine needed to be replaced because the lifters/cam were not readily available from the manufacturer due to a known issue with L87 GM motors. Long block was replaced 7/17/24. I believe this should be part of the recall issued against L87 motors and should be extended beyond the 2021-2024 years initially noted.

6.2L collapsed lifter on cylnder 5. This os my second engine with the exact same problem as the first engine reason for replacement