2017 HONDA RIDGELINE Complaints

Sunroof randomly exploded I was traveling on a highway and we heard a very loud “pop”. We at first thought we were hit by someone else, or blew a tire. Neither occurred but then heard wind and noticed the sunroof not only shattered, but blew outward. There were glass shards all around. We have taken it to the dealership and they said while other vehicles have had problems, the Ridgeline is not under a recall. I took pictures as to document what occurred. There was absolutely no warning that it was about to happened, either through the vehicle warning system or noises prior to the loud pop. It simply came out of no where and scared us immensely until we recognized what had happened.

My 2017 honda Ridgeline started making loud noises coming from the engine. I took it to autozone and they used there diagnostic tool and all that came up was an issue with the oxygen getting into the fuel due to an issue with the fuel injector. On my way home it stopped running as I was making a turn. Mechanic confirmed engine failure. I did research and typed my vin into Kelly blue book recall section and 7 recalls came up, including the engine. But when I called Honda they said only 2 recalls were associated with my VIN.I take good care of my truck and there is not reason why my engine would fail unless there was an issue with manufacturing, or one of the other recalls caused the engine to fail. I purchased my truck for $30k a few years ago and I can’t afford for it to completely inoperable and am certain the engine seized because of a manufacturing issue.

Our 2017 Honda Ridgeline started making a rattling sound coming from the engine compartment. We took it to our local mechanic, who determined the engine rod bearing had failed and the engine needed to be replaced. The vehicle was then taken to the local Honda dealer for repair in case it was covered under NHTSA Campaign Number: 23V751000 (Engine and Engine Cooling). The dealer diagnosed that the engine rod bearing had failed and the engine needed to be replaced, but would not cover cost of the repair since the truck's VIN was not included in the recall even though the truck had experienced the failure listed in the recall. The truck had only 72,000 miles on it and had been regularly maintained. Per my mechanic, it should not have failed in this manner. In fact, he'd never seen a failure like this on a relatively low mile vehicle that had been maintained. I believe that the recall needs to be re-examined to see if the scope needs to be broadened to include more VINs. Based on my mechanics input and the nature of the current recall, I don't believe this failure was just an "bad luck" outlier.

Vehicle appears to have rod bearing failure and is available for inspection. Myself and family are at risk for being in a serious accident and/or stranded should catastrophic engine failure occur. Problem has been reproduced and confirmed by dealer (Howdy Honda Austin, TX). There is an existing technical service bulletin (TSB 24-002) for this issue and dealer believes my vehicle is affected, but my VIN does not show in affected VIN database. Vehicle has been inspected, but not affected part since that would require opening up the engine block. No warnings, just the engine knock which showed up a couple months ago. Besides taking vehicle to dealer for inspection, vehicle has been parked.

On our way home the motor started ticking loudly and more and more loss of power. All the dash lights came on with the check engine light. We called the dealer and they said to bring it in. We babied it another mile and could no longer go more than 20 mph. We pulled over as soon as we could and the motor couldn’t go any more. Had it towed to the dealership and they said the whole fuel injection system failed and then discovered the rod bearings were destroyed. The car only had 84,000 miles on it and we have only owned it since November of 2023 we had the last service done at the dealership. I know the VIN isn’t right for the recall of the 2017 Ridgelines rod bearings but so many other people have had the same problem. I feel it should at least be looked into more. I do not have a repair invoice yet because it is still at the dealership waiting for a motor to be delivered to put in it.

There was an engine failure with a rod bearing in the engine. I believe the engine is still available at the shop that replaced it for review. I have already raised this issue with Honda and they were not interested in seeing the motor. The truck stalled out on the highway on the way to work during high traffic time. The truck was looked at by an independent auto repair shop. After the failure the engine did restart, and it was obvious by the noise that it had a bearing failure. There were no symptoms that the engine would fail before failure. at the time of the failure the engine light did come on. After the failure I learned that this exact year and model of truck had a recall for the exact issue that I had. I contacted Honda dealership before I had the repair completed and they said they would reach out to the Honda representative to see if there was anything they were willing to do. Nobody got back to me until several weeks later after I contacted Honda customer service on 3/21/24. Honda customer service sent me an email on 4/11/2024 after the engine was replaced. I was told since the engine was already replaced there was nothing they could do. I believe that Honda knows that this bearing recall affects many more vehicles including mine and are trying to save money by not releasing the true scope of the vehicles that may be affected. I will attach a copy of the bill for the engine replacement.

While driving the automatic transmission would shift hard causing a lurching motion with the truck. This has happened multiple times and is a known to Honda. It did it again recently shifting hard or not shifting which is a problem in traffic where cars are moving faster speed I almost had someone hit me from behind because as the truck accelerates it suddenly stops and lurches forward like popping a clutch in a standard. Then the emission control light came on, check transmission light came on, bsi light came on and on the display where it indicates P D R L it the P symbol with an X through it. I was in heavy traffic and felt lucky not to be in an accident

The collision mitigation Braking System has activated my brakes resulting in a lock up 3 times and I've only owned the truck for 2 months. One of the times I was rear ended do to the trucking stopping suddenly. I now have to drive with the system turned off because of how dangerous it is to have on.

- Door actuators - specifically back door actuators. Both back door actuators are failing, one almost never works (sometimes locks, never unlocks) and the other one is more sporadic. The front passenger door also went a week a few months ago that it was not consistently working. - Safety - 1- the actuators inconsistently work and either leave the car unsecured while moving/parked. 2- because the doors at times only manually lock my 3 year old can open the door. I have changed the side of the car I have her car seat on so I can reach behind me if it does not lock. 3- A younger kid cannot unlock the doors because they are much harder to push after they malfunctioned. Sometimes they become completely jammed and I have to push on it really hard while operating the handle... it is challenging for an adult, let alone a child. I really can't live with not fixing them as my kids would be trapped in an emergency situation. - Yes, dealer confirmed it was the actuator, but could only get back passenger door to fail during the visit. - No, just the dealer who gave me a quote to fix it. Quote was for almost $800 for both back doors, plus $80 to "diagnose" what I already told them which was the actuators did not work. I have it scheduled to be replaced for half that price at a different shop next week. This seemed like a crazy price to not have my kids trapped in the car. This sounds like a common issue in forums and since both of mine have failed (plus maybe the front passenger door too) it doesn't seem like bad luck of 1 part. - No I am not exactly sure when it started. I think the back passenger door has been awhile, my auto-start stopped working but the door awhile ago and I think this was the reason. I didn't realize it until last summer when I went to open the door when someone opened my door when I knew the truck was locked.

Rod bearings failed, leaving metal shards in the pistons which causes engine the to overheat and seize or catch fire. The engine noise was getting increasingly loud over a 3 day period so I took it into the dealership (Honda of Seattle) and they found rod bearings had worn apart and were floating around inside the engine. This requires a full engine replacement. There were no warning lamps.