2013 HYUNDAI ELANTRA Complaints

My steering wheel has been shaking and having a clunking sound when I accelerate over 60 miles, go over any bumps, and turn. I had my mechanic diagnose it and I was told the steering coupler was bad. I did some research to see if it was a recall and it wasn't. Then I saw on Hyundai.com then I could check my VIN and verify if my vehicle qualified for the extended warranty for this issue. My vehicle qualified however after contacting customer service directly to verify, they advise me my vehicle did not qualify because of being over 100,000 miles. Prior to contacting them I saw that they had a statement saying that this issue was not safety related. I didn't believe that to be correct because my mechanic told me otherwise, and information I saw regarding Google searches said the opposite. Also, my own experience whenever that shaking of my steering wheel occurs I literally have to use both of my hands to control it. Therefore I believe it is a safety issue that absolutely needs to be revisited as being such. I was advised on that call to take it to the dealership and have them diagnose it and advise headquarters directly however I made it clear that I did not want to have to incur a diagnostic fee when the initial diagnostic I had was free and I have the estimate breakdown from my mechanic. And I did not believe that there should be any diagnostic fee for a safety concern. I did advise them that I was going to contact NHTSA and advised them of this circumstance in order for it to be reviewed.

During the incident, there was an aggressive flow of smoke coming from behind the steering wheel within the dashboard indicating overheating and/or a fire. My vehicle was inspected by my local dealer, Ed Voyles Hyundai, who stated that their inspection found a burning left rear tail light assembly with fluid inside of it. No warning lamps or prompts appeared during the incident.

In the last month I started to hear a clicking sound when turning my steering wheel in either direction. I am told that this is a frequent problem with Hyundai Elantra and is caused by a flexible coupling breaking. I brought my Elantra to the dealer to take cre of some other recalls but was told that the coupling problem is not a recall issue. I do have a Technical Service Bulletin from Hyundai on this issue and feel that since it happens frequently on the Elantra, it should be covered by the dealer or Hyundai corporate. Please advise as I cannot afford to pay for this repair as I am on disabilty with limited income.

I am reporting a significant paint delamination issue on my 2013 Hyundai Elantra in Sparkling White. The paint has been peeling, bubbling, and chipping particularly on the roof, trunk, and hood, exposing the primer and bare metal underneath. This is not due to wear, environmental exposure, or physical damage. It appears to be a factory defect related to improper paint or primer application. This issue is widespread among Hyundai owners of the same year and color, and several technical service bulletins have already been issued for similar paint problems (such as TSB 19-BD-005H). However, Hyundai has refused to repair my vehicle, citing the expired warranty, despite clear evidence of a manufacturing defect. The exposed metal poses a rust and corrosion risk, which could compromise vehicle safety and structural integrity over time. I believe this should be investigated as a potential quality and safety concern and request the NHTSA to look into this recurring defect.

On August 9, 2025, my 2013 Hyundai Elantra suffered catastrophic engine failure while driving. The engine seized, creating immediate danger on the road. This vehicle is under NHTSA Recall 23V651000 (Hyundai Recall 251), which warns of fire/engine compartment risks both while parked and driving. Hyundai denied my claim, citing a vendor report that found “no thermal damage” to the ABS wiring. However, the dealer’s inspection confirmed internal engine failure with thermal damage, and I directly witnessed flames. The recall does not require ABS wiring itself to burn , it covers the broader safety hazard of fire and failure, which is exactly what occurred. In addition, Hyundai tried to shift blame onto owner maintenance. Their own recall language acknowledges failures occur due to the defect, not neglect. Furthermore, the handling by Hyundai’s case managers was unacceptable: my case was transferred without notice, calls were ignored, and I was left without clear instructions or remedy while my vehicle was disabled. I have attached the denial letter, the dealer report, the recall notice, and proof of maintenance. I request NHTSA review Hyundai’s mishandling of this recall obligation and require them to provide remedy and compensation

My 2013 Hyundai Elantra with the 1.8L Nu engine suffered catastrophic engine failure. A mechanic found metal shavings in the oil and diagnosed a failed connecting rod bearing. The Hyundai dealership quoted $10,000 for a new engine and refused warranty coverage because I am over 120,000 miles, even though this is a well-documented defect. Hyundai issued TSB 22-EM-007H covering rod bearing wear in this engine, and there have been class actions and warranty extensions for similar failures. This failure creates a safety hazard, as the engine can seize or stall suddenly while driving, increasing risk of an accident. I request NHTSA investigate this known defect in the 1.8L Nu engine, as it poses a safety risk to myself and others.

Under carriage steel brake line rust through at support bracket and causing a loss of brake fluid and risk of stopping condition that raise a concern of an accident and protentional risk of injury to the owner/operator and other drivers on the road. This rust condition and due to road salt condition in state that use road salt and Hyundai clearly lacks undercoating protection. This issue has been seen by other 2013 Hyundai Elantra GT owner and been clearly documented in Hyundai discussion forums. The brake light did come on and I drive it to the first repair shop to fix the issue by replacing the rusted brake line. The repair shop noted the lack of manufactures undercoating of this product cause numerous rusting concern on the under carriage of this vehicle include steel brake line, steel Fuel line and steel Evp emission lines along with safety concern associated with each issue

After the recall at Hyundai, my car wouldn't run and there were many lights on the dashboard. It was later checked and the instability light problem persisted. They fixed on the same time, and say something problem with the update. They later informed me that I have a problem with the brake switch, and the brake lights don't work because of it. I replaced and doesn’t work, I went back to the store and they want me to pay a fee to have it analyzed again. Even though before the recall, the lights and the car were working perfectly.

This seems to be a very common and serious issue with Hyundai vehicles. 2013 Hyundai Elanta, believed to be a frequent crankshaft position sensor issue. When driving the car, they vehicle will feel that it is losing power. When coming to a stop the engine will idle so low that it feels like it will stall or it does stall. The tachometer registered zero RPM's, even when accellearting. Attempting to accelerate up any incline and the car can not provide enough power. Sometimes the car will crank up, other times it will require time to restart. The car has stalled and low power idling multiple times, but it did happen in the middle of a 4 way intersection twice, and when the issue is present. Although we've been fortunate, no accidents have occurred, it is very unsafe for the owner and other drivers. This occurrence has happened several times over the past year. Two times it was immediately brought into the dealer service, the second time it did stall with the service member there. Both times they were unable to diagnose the problem and stated no error codes were reported. You have already issued a Recall for this same issue with a different model. Oct. 13, 2017 – Hyundai Motor America has recalled more than 400 vehicles potentially equipped with defective crankshaft assemblies, according to documentation submitted to the National Transportation Safety Administration. There are so many others that have reported this same issue and have been corrected with the replacement of the crankshaft position sensor. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2013 Hyundai Elantra. The contact stated that while in the process of parking the vehicle at the residence and driving 1-5 MPH, the brake pedal was depressed, but the vehicle unintendedly accelerated and hit another unoccupied parked vehicle, causing the other vehicle to move 50-60 ft. away. The rear end of the other vehicle was damaged, and the front end of the contact's vehicle was damaged. The air bags did not deployed. There was no injury sustained. The dealer was not notified of the failure. The manufacturer was notified of the failure, and a case was filed. The failure mileage was approximately 72,000.