2016 JEEP PATRIOT Complaints

Problems started when the wheel and axel came off the vehicle on a side road 3 years ago. The vehicle dropped a wheel again when crossing the country a month later. Both incidents included my wife and passengers. That at least seems resolved. At 28900 miles or so we have been wrestling for the last year and some with intermittently all the warning lights coming on and now the car will occasionally lose all power while in motion. So we have taken it to the dealership where they say it requires a replacement of the electrical harness. Topping off, the driver seat rest safety mechanism deployed randomly this last week while the vehicle was parked in the driveway.

The horn stopped working 4 months after purchase I've had it for a year. It has a hard time accelerating when you're hopping on the freeway. There's also a wiring issue with the rear blinkers and taillight it works for a little bit then goes out off and on throughout the trip.

The contact owns a 2016 Jeep Patriot. The contact stated while driving 25 MPH, the vehicle stalled and the check engine warning light was illuminated. The contact was able to pull to the side of the road. The contact stated that the vehicle repeatedly stalled while driving. The contact pulled to the side of the road and turned the vehicle off. The contact restarted the vehicle after a few minutes and drove to the residence. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure, but no assistance was provided. The contact was informed that the repair was not covered under recall. The failure mileage was approximately 166,666.

While parked the passenger side head rest opened up exposing the air bag ect stuff

Incident One: 2016 Jeep Patriot stalled at 45 miles per hour. Dealership said crankshaft position sensor was defective and needed to be replaced for $550. They said there was a Recall date 2016-12-15, Recall no.16V907000 Chrysler (FCA US LLC) is recalling certain model year 2016 Dodge Journey, Jeep Compass, and Jeep Patriot vehicles manufactured May 9, 2016, to July 15, 2016. The crankshaft or camshaft sensor may only work intermittently, causing the engine to stall, but that it didn't apply to my Jeep's VIN, even though same year, make and model and same issue. Paid $550 to have repaired. Incident Two: 2015 Jeep Patriot stalled at 45 miles per hour on highway in rush hour traffic. Red TPS lightning bolt, yellow TCS warning, and red Check Engine lights came on as Jeep stalled. Dealership advised that Throttle Position Sensor had failed, and as it is integrated with the Throttle Body assembly, that the entire Throttle Body assembly needed to be replaced for $800. Dealership also advised that there was a recall for this issue for 2016 Jeep Patriots like mine, but that it didn't apply to my Jeep's VIN. Almost crashed both times with passengers, none of whom were pleased. Why don't these two recalls include my vehicle, when it is the same two issues recalled for other 2016 Jeep Patriots??

The check engine light came on. Checked it at an AutoZone. The error code was P0335, crankshaft position sensor. On the way to my mechanic, my vehicle stalled three time in 2 miles and had to pull over to a side. I felt lucky there were no vehicles behind me. Took it to a repair shop and the mechanic scanned it again. He told me to take it to a dealer because after entering my VIN, he was notified by his computer system that there is a recall notice out for this VIN. (S89) Called a Chrysler dealer but was told that there is no recall by the VIN. Called Chrysler corp and explained the situation. The rep said since the basic warranty expired, the repair service will not be covered under the recall. The engine was keep stalling and I had to repair the vehicle at the mechanics shop. Replaced the crankshaft position sensor and the harness assembly. After the repair, the problem no longer exists. Cost of repair totals $410.

The contact owns a 2016 Jeep Patriot. The contact stated while driving 70 MPH, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. Additionally, several unknown warning lights and the ABS warning light was illuminated. The contact stated that the failure had occurred a year prior. The vehicle was taken to the dealer where it was diagnosed with a front wheel bearing failure and the front wheel bearing was replaced. The failure reoccurred. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure. The contact was advised to take the vehicle to the dealer to be diagnosed. The failure mileage was approximately 76,140.

Last night was the 3rd time my family's safety was threatened by a malfunction in my 2016 Jeep Patriot (manual). When driving, the car started to stall out as if I'm changing gears badly, but wasn't doing so. Next, it stalled completely without any dashlight notices. I was forced to pop it out of gear to give some control to the steering (something I learned after the 1st time it happened). Then, I coasted to the side of the road while maneuvering moving traffic! The 1st 2 times this happened I was in local traffic and it almost caused an accident. Last night, I was in the center of I95 with rushing traffic. Terrifying! Each time the car has had to be towed and the crankshaft sensor has been the culprit. It is in the shop today (June 1, 2024) and that's the problem again! The dealership says the recall on Jeep Patriot crankshaft is not for my vehicle. Please help.

MY JEEP IS STALLING WHILE I AM DRIVING, THE ONLY LIGHT ON MY DASH IS THE TRACTING CONTROL LIGHT WHEN THIS HAPPENS AND IT HAPPENS RANDOM MOSTLY ON THE FREEWAY WHICH POSE A RISK OF A GETTING INTO A ACCIDENT. I REPLACE THE THOTTLE BODY ON IT NEW SPARK PLUGS AND WIRES AND IT KEEPS STALLING

The contact owns a 2016 Jeep Patriot. The contact stated that on two occasions while driving at approximately 35 MPH, the vehicle stalled. The vehicle was able to restart after an hour each time. The vehicle was taken to the residence. The vehicle was towed to an independent mechanic where it was diagnosed that the crankshaft sensor needed to be replaced. The vehicle was repaired but the failure persisted. On another occasion, the contact stated that while driving at approximately 40 MPH, she observed a winding noise emanating from the engine compartment. The contacts stated that the vehicle lost motive power and failed to accelerate as intended. The vehicle was taken to an independent mechanic where it was diagnosed that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 41,000.