2024 KIA TELLURIDE Complaints

I activated the windshield wipers and noticed no fluid spraying from the nozzles. Upon checking the washer fluid reservoir under the hood, it was nearly empty despite being refilled just two days prior. There were no visible external spills, but I discovered a significant puddle of washer fluid accumulating behind the front-right wheel well liner, indicating an internal leak. Further inspection (guided by online owner forums reporting the same issue) revealed that the ribbed plastic section of the windshield washer hose—specifically at the connection point near the firewall—had cracked and separated. This hose runs as a single assembly from the reservoir, through the engine bay, to both front and rear nozzles. The crack appears to be a manufacturing defect in the brittle plastic material, which is prone to fracturing under normal temperature fluctuations or minor vibrations, rather than wear from high mileage. The failure eliminates the ability to clear the windshield of rain, bugs, or debris, creating a hazardous blind spot and directly contributing to reduced visibility.

The contact owned a 2024 Kia Telluride. The contact stated that, while the vehicle was turned off in her driveway, she observed flames emanating from the interior of the vehicle on the driver's side. No warning lights were illuminated. Local emergency services arrived and were able to extinguish the flames. The contact was later informed that firefighters on scene believed that the fire originated at the driver's seat. The vehicle was towed to a storage facility and deemed a total loss by the contact's insurance provider. A fire report was filed. A police report was filed, and injuries were not reported. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 24V407000 (Seats); the VIN was included, but the vehicle had been repaired. The manufacturer was notified of the failure but provided no assistance. The failure mileage was 50,000.

The contact owns a 2024 Kia Telluride. The contact received notification of NHTSA Campaign Number: 25V494000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

Summary: Emergency collision warning system activated unexpectedly at highway speed, causing sudden braking and loss of vehicle control. Details: While traveling approximately 65 mph on [XXX] , the emergency collision warning system in my Kia activated suddenly and without cause. There were no vehicles in front, beside, or near me at the time. The system automatically engaged the brakes, causing the rear of my vehicle to jackknife. The vehicle did not slow gradually—it braked abruptly, creating a serious risk of rear-end collision. Afterward, the car would not shift back into drive, leaving me stranded in a dangerous location in the middle of the highway. This is the third time I have contacted Kia regarding the same malfunction with the emergency collision warning system. The issue remains unresolved and continues to pose a severe safety hazard to myself and other motorists. Date of most recent incident: [XXX] Vehicle information: 2024 KIA telluride Vin: Est.mileage: 37,000 Location: [XXX] Summary of concern: This malfunction causes the vehicle to brake unexpectedly and lose drivability, with no valid reason for system activation. This could easily result in a rear-end crash or multi-vehicle collision. I am requesting that NHTSA investigate whether other Kia owners have experienced similar incidents and whether this issue warrants a safety recall or software fix. This is my third experience with this warning system malfunctioning I have reached out to Kia previously before. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2024 Kia Telluride. The contact received notification of NHTSA Campaign Number: 25V494000 (STRUCTURE); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

The contact owns a 2024 Kia Telluride. The contact received notification of NHTSA Campaign Number: 25V494000 (STRUCTURE); however, the part to do the recall repair was not yet available. The contact stated that the vehicle was purchased in June 2025. While driving back to the residence after the vehicle was purchased, the cover behind the rearview mirror detached and was hanging loose. The contact took the vehicle to the local dealer for repairs, and the dealer refused to repair the vehicle. The contact was informed that the vehicle had an aftermarket windshield, which caused the glue to melt. The vehicle was not repaired. The contact stated that the failure persisted. The contact stated that on a separate occasion, while closing the front driver’s side door, the door molding trim had delaminated and detached from the vehicle. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 18,000.

This vehicle only has 31,000 miles on it and I've already had one door trim molding replaced. (now the rest of the trim doesn't match so that's great for aesthetics) The interior door panel replaced because it was loose. This car developed a "thumping" noise around 25K miles when turning at low speeds. Took it to the dealer, told them it is probably the AWD coupler, and they said the self-leveling rear shocks were leaking. So those got replaced. Thumping was still there. I mentioned to the dealer that it is probably still the AWD coupler. Dealer decides to replace the rear differential because they found metal shavings in the diff fluid. Sound is still there but now not as loud. Car is currently back at the dealer for diagnostics to remedy the situation. I don't understand how a car with only 30k miles on it should be having these kinds of major issues. Kia seems to know about these issues because they do not argue about replacing anything. The car looks great, and the size is great. But I cannot imagine the nightmares I'm going to have for the next 30K. Or how bad the nightmare will be once I am out of factory warranty.

The contact owns a 2024 Kia Telluride. The contact received notification of NHTSA Campaign Number: 25V494000 (STRUCTURE); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

Window trim metal fell apart and plastic molding dislodge without reason, only for 2 years old car.

The contact owns a 2024 Kia Telluride. The contact stated that while attempting to open and close the door, there was an abnormal popping sound coming from the rear driver’s side door. No warning light was illuminated. A dealer was contacted. The vehicle was diagnosed with a stripped bolt. The dealer was unable to replace the bolt and referred the contact to an Auto Body Shop for assistance. The manufacturer was notified of the failure and opened a case. The approximate failure mileage was 25,000.