2012 MERCEDES-BENZ C300 Complaints

Part number: 207-350-97-02 This is the sub frame part number, during routine maintenance i found a cracked rear sub frame mount. Upon googling, there are hundreds of owners with that same problem. Cars with milage ranging from 40,000-150,0000 with the same issue. Under hard braking the car is unstable. When I called the MB dealer to inquire about the problem they did confirm that the problem is known but is not a safety recall and the repair bill is near $5,000. So Mercedes, confirmed it’s a known issue with a faulty part, confirmed it was a safety issue with the 2008-2012 Mercedes c300 and is not covering it.

The contact owns a 2012 Mercedes-Benz C300. The contact stated while driving 70 MPH, there was an abnormally loud sound from the rear of the vehicle. The contact lost control of the vehicle. There was no warning light illuminated. The contact was able to continue normal driving once he regained control of the vehicle. The contact scheduled an appointment with an independent mechanic for the vehicle to be inspected. The contact was informed that the rear subframe had detached from the passenger’s side of the vehicle due to severe corrosion. The dealer was notified of the failure and informed him that there were no recalls related to the failure on his vehicle. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 138,000.

The contact owns a 2012 Mercedes-Benz C300. The contact stated that while the vehicle was receiving a routine maintenance, she was informed that the rear sub frame was rusted and had two holes. The vehicle was diagnosed that there was a transmission leak and the rear sub frame needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure but no additional assistance was provided. The failure mileage was approximately 88,000.

The contact owns a 2012 Mercedes-Benz C300. The contact stated while driving approximately 65-70 MPH, he heard abnormal clicking sounds coming from the rear of the vehicle. Additionally, the contact stated that while driving and depressing the brake pedal to come to a complete stop, the vehicle swerved while stopping. The vehicle was taken to an independent mechanic where it was diagnosed that the rear driver's side subframe was severely corroded and fractured and needed to be replaced. The dealer was notified of the failure and informed the contact that the vehicle would be repaired at his own expense. The vehicle was not repaired. The manufacturer was notified of the failure but did not provide any assistance. The failure mileage was approximately 75,000.

The rear K frame on Mercedes Benz C300 totaly rusted through and broke apart causing the entire rear of vehicle to rest upon the fuel tank. The failure also caused stress on rear brake lines. The vehicle is 10 years old with 90,000 miles purchased brand new and garaged. Mercedes has performed a recall on Canada vehicles but no USA vehicles. This is total negligence. This is going to cause a fatality. Either a vehicle will catch fire or brake lines will fail and cause an accident. The vehicle is known by the dealers to have this damage/failure. I googled and found numerous cases. Mercedes was not willing to stand by the vehicle and repair. This should be a recall like it is in Canada. I was quoted $5000.00 to repair by Mercedes.

I drove over an object on the highway and noticed my car veering left and wobbly when turning. A week after, it is squealing like a load of piglets in my trunk whenever I go over a bump, then my battery light came on and I took it to the shop and contacted my insurance, who denied my claim saying it was 'wear and tear'.

From the mechanics notes: Four-wheel alignment could not be completed. Attempts to align the rear axle were unsuccessful due to flexing/movement in the rear suspension. A brief road test revealed occasional suspension “clunking” coming from the rear of the vehicle. Close examination of every suspension component mount revealed heavy cracking on the passenger side lower drag link subframe mount (see emailed image). The driver’s side low drag link mount location is also starting to show signs of overstress and rust/flaking. This is a known design defect that has been the subject of a manufacturer’s recall in Canada. Given the substantial safety impact of this design defect/failure, it is expected that a US recall will be forthcoming. Proper repair of this failure involves removing the entire rear axle/subframe assembly and either rebuilding/re enforcing the subframe or replacing it with a new unit and transferring all the suspension components to the new subframe. A current check of subframe availability is showing NLA (no longer available) status from Mercedes wholesale dealers – likely due to recent high demand and inability to satisfy that demand. This supply issue may also be playing a role in Mercedes’ failure to address this high level safety issue with a US based recall campaign. The manufacturer may be ramping up production of this component to address anticipated need – waiting to announce a recall when it has sufficient parts on hand to execute the campaign. It is strongly recommended that you file an NHTSA complaint for this issue and limit driving until the problem is rectified either independently or under the auspices of a recall campaign. The passenger side rear drag link has not yet completely separated from the subframe but is likely to do so soon which can result in an accident or loss of control as this critical suspension link is responsible for maintaining steering direction of the right rear wheel.

I took my vehicle in for a state inspection and was informed the rear subframe was rusted/rotting and on the verge of detaching. Had this happened while driving, the results could have been catastrophic. The vehicle cannot be driven until this $4K dollar repair is completed. Upon speaking with the mechanic, this is a well known issue within Mercedes. Had I not asked for an alignment, this would have remained undiscovered until it inevitably broke off while driving the vehicle. This is a major safety issue and a safety recall should be issued.

The contact owns a 2012 Mercedes-Benz C300. The contact stated that while driving at an undisclosed speed, he depressed the brake pedal and the vehicle swerved. Upon inspection, the contact noticed that the rear passenger's side sub-frame was corroded and the stabilizer arm had detached from the sub-frame due to corrosion. The vehicle was taken to an independent mechanic who diagnosed that the sub-frame needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 100,000.

Vehicle was in for state inspection at an authorized inspection station. It failed inspection due to severely rusted and deteriorated rear K-Frame which had to be replaced to pass inspection. This is a major defect I feel caused by manufacture negligence. There were no warnings, messages or any signals indicating a problem. This issue could have severely caused an injury or even death had it not been detected by the mechanic inspector. Mechanic stated to me that he had replaced several of the rear K-Frames in the last year on this make and model.