2017 MERCEDES-BENZ METRIS Complaints

The contact owns a 2017 Mercedes-Benz Metris. The contact stated that the rear back-up camera would display a blank image while in use. The contact also stated that he replaced four tires after he noticed that the tread on all four tires were wearing excessively. The contact then received notification of NHTSA Campaign Numbers: 22V099000 (Back Over Prevention) and 22V482000 (Tires) however, the parts to do the recall repairs were unavailable. The dealer had been notified about the recall and confirmed that parts were not yet available. The manufacturer had been notified of the recall. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The failure mileage was approximately 25,000. VIN tool confirms parts not available.

Safety inspection of tires are showing abnormal and rapid tread wear focused on the outside facing section of tread on all four tires. While the section of tread on the inside facing section is near factory new. The vehicle was bought factory new and this is on the original set of tires. Mileage at this time is still below 25,000 as it is driven sparingly. Despite that All four corners exhibit rapid and uneven wear of the tread indicating an alignment issue from the factory. The vehicle has never been in any colision nor curbed even once. Owner research on various Metris forums show this is not an isolated issue. Many point to an error in factory parameters regarding camber as well as a excessive toe in.

I have been trying for 5 months to get this fixed from the dealer and or manufacturer.They still state they dont have the parts or something . Its been to long and this is a serious safety hazrd to not be able to use the back up camera correctly . We are not even using the vehicle at this time .

Rear back up camera image is frozen, showing a rear view snapshot, but not a live image.

I was driving in a very remote location in central Utah on a paved Utah state highway and I crossed a cattle guard at about 45 mph. Immediately after crossing the cattle guard, the power steering malfunctioned, an alarm sounded and this message in bright orange appeared on the instrument panel display “Power Steering Malfunction. See Owners Manual". I immediately pulled over and stopped the vehicle. Luckily, I had cell service, so I called my Mercedes-Benz dealership and talked to someone in the service department and I also called my mechanic at an independent Mercedes-Benz shop. After these phone calls and I concluded that it would not harm the power steering system to drive, I decided to continue driving -- without power steering assist. It was hard to steer, but not unsafe on the rural 2-lane road nor on rural I-70. After driving about 30 miles in 1/2 hour, I stopped at a rest area and turned off the engine for about 10 minutes. When I restarted the vehicle, the power steering was again functional and has not malfunctioned since then. After returning home I called Mercedes-Benz national customer assistance center. They were very unhelpful. All they would tell was that there was no recall campaign for my vehicle for this issue and that my vehicle is no longer under warranty – information I already knew. The agent told me I should schedule an appointment with my dealership to run diagnostics on the vehicle - not done. This doesn’t make sense to me as the power steering is now functioning correctly. Safety risk: This failure of the electronically controlled power steering system only happens when the vehicle is moving at a higher speed and the tires cross some kind of rough area on the road, such as a cattle guard or a rumple strip, making steering very difficult. See more information the Metris Forum website where others describe this occurrence. https://www.metrisforum.com/threads/another-2016-looses-power-steering-after-cattle-guard.10402/#post-120744.

TL* THE CONTACT OWNS A 2017 MERCEDES BENZ METRIS EQUIPPED WITH HANKOOK TIRES, TIRELINE VENTUS S1 NOBLE 2, TIRE SIZE 225/55/R17, DOT # 5MKC1AH0316.. THE CONTACT STATED THAT THE TIRES WERE JUST ROTATED AND WAS DRIVING AT 75 MPH AND THE FRONT DRIVER'S SIDE TIRE BLEW OUT FROM INSIDE OUTWARD. THE CONTACT PULLED OVER ALONG THE LEFT SIDE MEDIAN LANE ON THE HIGHWAY. THE CONTACT THEN HAD TO PULL OVER THE RIGHT SIDE OF THE HIGHWAY WITH THE ASSISTANCE OF HER TOWING SERVICE. THE DAMAGED TIRE WAS REPLACED ON THE SIDE OF THE ROAD AND THEN THE CONTACT TOOK THE TIRE TO THE VEHICLE DEALER RBM OF ATLANTA 7640 ROSWELL RD, ATLANTA, GA 30350 (770) 390-0700 WHO CONFIRMED IT WAS TIRE MALFUNCTION NOT FROM HITTING A FOREIGN OBJECT. THE CONTACT HAD ALL FOUR TIRES REPLACED BY THE DEALER. THE TIRE DEALER MANUFACTURER WAS CALLED BY THE CONTACT AND HAD PICTURES OF THE DAMAGED TIRE SENT TO THEM. THE CONTACT CURRENTLY HAD ALL FOUR HANKOOK TIRES IN HER POSSESSION. THE TIRE FAILURE MILEAGE AND THE VEHICLE FAILURE MILEAGE WAS 22,000. *DT*JB*DT*JB

MERCEDES BENZ STATES THAT IT DOES NOT HAVE PARTS AVAILABLE FOR A FUEL LINE LEAKING PROBLEM WHICH IS SUBJECT TO AN OUTSTANDING NHTSA RECALL NUMBER 18V837. MERCEDES BENZ (877 762-8267) HAS NOT IDENTIFIED A SCHEDULE FOR THE ACQUISITION OF THE NECESSARY PARTS OR RESOLUTION OF THE PROBLEM. MERCEDES BENZ DOES NOT HAVE A SENSE OF URGENCY IN THE RESOLUTION OF THIS PROBLEM AND HAS STATED THAT THEY WOULD ONLY SEND ME A LETTER IN THE FUTURE ON THE AVAILABILITY OF PARTS. FUEL LINE LEAKS CAN BE DEADLY AND, MINIMALLY, MERCEDES BENZ SHOULD HAVE AN INTERIM RESOLUTION PLAN WITH DATES TO ASSURE SAFETY WHICH ALSO INCLUDES AN EXPEDITED CONTACT METHOD. *TR

UNEVEN TREAD WEAR OF LEFT FRONT TIRE. (CORPORATE CLAIMS MY VEHICLE IS NOT AFFECTED SINCE THE TECHNICAL SERVICE BULLETIN IS NOT PULLED UP BY MY VIN, BUT MY TIRE PROVES OTHERWISE.)

THE TIRES HAVE WORN OUT TO THE METAL AFTER 5000 MILES AS THE ALIGNMENT WAS PER THE SERVICE TECH - SENT OUT INCORRECTLY AT THE FACTORY- THE VEHICLE WAS KEPT FOR OVER 30 DAYS.. JUDGING FROM USER FORUMS THIS SEEMS TO BE HAPPENING ON A FREQUENT BASIS