2019 MERCEDES-BENZ SPRINTER 2500 Complaints

2019 MERCEDES BENZ SPRINTER 2500. CONSUMER WRITES IN REGARDS TO DEFECTIVE ELECTRONIC MODULES. THE CONSUMER STATED THE EIS AND EZS MODULES ARE EXPOSED TO WET AND DAMP CONDITIONS. OVERTIME THEY CORRODE AND NEED TO BE REPLACED. THE CONSUMER STATED THE MODULES WERE IN A POOR LOCATION. THE CONSUMER STATED THE VEHICLE EXPERIENCED A FAILURE WHILE THE VEHICLE WAS NOT IN MOTION.

I brought my 2019 4x4 Sprinter Van in for a campaign recall for the power steering hoses and clamps. The dealership said they made the repairs as necessary and sent me on my way. A few weeks later the power steering hoses blew while driving and almost caused an accident. I was stuck on the side of the road and lost all steering capabilities. Come to find out the dealership lied and never made the repairs as necessary as far as replacing the faulty clamps. After getting the vehicle towed back to the dealership they replace the clamps with cheap hardware store clamps and I have had problems with my power steering ever Since then. I’ve taken my vehicle back multiple times for them to make the repairs and they replace the power steering pump once with a remanufactured one unfortunately I continue to have power steering issues. This is all due to the faulty hose clamps on the power steering unit for the 2019 4x4 Sprinter Van. If they would’ve replace the hoses with longer hoses and the proper fittings this would’ve all been prevented and could potentially prevent a serious accident while driving.

The main display screen in the unit has failed, which means the following is no longer functional: Reverse camera (rearview camera image) ; Traction control settings ; Lane Departure system settings ; Door lock settings ; Vehicle lighting settings

The 2019+ Mercedes Sprinter EIS (Electronic Ignition System) module is bolted under the driver side dash board to the base of the A pillar where it meets with the firewall. The electrical connector of the module is pointing straight up - this is an issue because any liquids that might spill on the dash (dash cupholder) or any humidity from windshield interior condensation will drip right down the wiring and into the EIS module causing it to short out. _ If the EIS module shorts out, the vehicle will be inoperable until a new unit is fitted. _ The EIS module retails at $1800+ from Mercedes _ Had Mercedes installed the EIS module with the connector facing DOWNWARD - this moisture related issue would not exist. _ There is no drip loop provisions in the wiring. _ Mercedes is aware of the issue as they have created a plastic bag with part number A 638 546 00 35 and they are charging $20 for it. As of right now, Mercedes refuses to fix this issue preventatively. They will only repair it AFTER the EIS module has shorted out. They are refusing to treat this as a warranty claim even though it is clearly a manufacturer defect. Please help? Thank you

I took my vehicle in for a recall on power steering hose 12/20. They said it was fixed. Last week I was driving down a 9000 foot mountain with my family when the power steering hose disconnected and I lost power steering while coming down an 8% grade. We almost went over the edge but luckily I was able to engage my brake fast enough to stop us just before the guard rail. We nearly died. This recall was supposedly fixed and it wasn't. I contacted the MB dealer where I bought the van and was given a non-reassuring answer that they'll take a look at it but no real concrete reasoning as to why this happened even after having it fixed.

The contact owns a 2019 Mercedes Benz Sprinter 2500. The contact state that while in PARK, the vehicle moved and rolled away. Additionally, while in park the vehicle moved when the seat belt was released. There were no warning lights illuminated. The vehicle was taken to the local dealer where they were unable to duplicate the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was unknown. The VIN was not available.

The contact's client was utilizing a 2019 Mercedes- Benz Sprinter 2500 for work. The contact stated while the vehicle was in park, the driver exited the vehicle however, it rolled backward, flipped over, and crushed the driver's legs. There were no warning lights illuminated. The driver sustained road and chemical burns and medical attention was provided. A police report was filed. There was no report of a fire or airbag deployment. The vehicle was towed to an independent lot. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and inspected the vehicle where the black box was retrieved. The contact mentioned referenced NHTSA Action Number PE21019 (Power train). The failure mileage was 965.

DRIVER STATED HE PUT THE VAN IN PARK ON BUT DIDN'T ENGAGE THE EMERGENCY BRAKE. ON HIS WAY TO MAKE HIS DELIVERY, THE VAN STARTED ROLLING BACKWARDS WITH THE DRIVER SIDE DOOR OPEN AND ROLLED BACKED INTO PILE OF SNOW.

The contact owns a 2019 Mercedes-Benz Sprinter 2500. The contact stated while driving at various speeds, the MBUX multimedia system became inoperable resulting in the rear-view camera not functioning as designed. Upon investigation, the contact associated the failure with NHTSA campaign number: 21V411000 (Electrical System, Back Over Prevention). The vehicle was diagnosed and repaired; however, the failure persisted. The manufacturer was not informed of the failure. The failure mileage was approximately 24,000.

The contact owns a 2019 Mercedes-Benz Sprinter 2500. The contact stated that while the vehicle was stopping, the contact heard a humming sound coming from the driver’s side of the vehicle. There was no warning light illuminated. The vehicle was not diagnosed nor repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 24,000