2022 RAM 2500 Complaints

Two fire related safety recalls ZA3 (10/22/2022) and 13A (2/9/2023) have yet to be resolved due to a lack of parts from the manufacturer with no date available as to the availability of required parts.

On 7/29/2023 was told my Rear Differential fluid was low by a non-dealer service provider. They stated no leak was detected, but the fluid was low and they topped it off as part of their stated service. In reviewing my previous oil changes performed at dealerships it states that only an inspection for a leak was done for differential units. Which leads me to believe that the truck came from the manufacturer with the reduced amount of fluid. This could still result in failed parts due to the unit not having the sufficient amount of lubricants for 33,000 miles. Which could lead to an accident involving myself and other vehicles. Each dealer now states that it is up to me to cover the cost of having it investigated due to it not being detected by a Ram Dealership. When, in truth, it would have never been found due to their "multi point inspection" parameters. The only time it would have been detected by a dealership is after a safety incident had already occurred.

11/21 purchased a 2022 Ram 2500 Tradesman level 2. Have been experiencing multiple issues since the purchase. Here is the MOST concerning at this time: On February 11, 2023 was at a stop sign when it felt like the truck was hit from behind. Looked in rearview mirror and there was no vehicle behind me. Was able to get it into a dealer on March 2, 2023 to get checked out. They only drove for one mile and stated no issue. Also stated that since no error code showed on the computer, then there is not an issue. This intermittent issue continues with multiple visits to dealerships with the same outcome: they are not able to duplicate the issue and no code is showing on the computer. My safety concern is the truck could lurch forward and hit someone walking through an intersection or another vehicle that is stopped in front of me when an assured clear distance is not possible. Or someone could think traffic was moving forward and hit me from behind. Example: during rush hour traffic assured clear distance is left, but other drivers see that as an opening and pull in front of me. Also, not everyone leaves a safe distance between vehicles. It happened 2 times on my drive last night alone. Rush hour is stressful enough without the added issue of not trusting my truck to perform safely. No warning lights or gauges show up when the issue is happening. Have engaged with Stellantis Customer Care. Was informed by one customer care associate they had a case just like this one for another customer. They did not provide a resolution to this case.

The contact owns a 2022 Ram 2500. The contact received notification of NHTSA Campaign Number 23V06000 (Electrical System) and 23V654000 (Back Over Prevention) however, the parts to do the recall repairs were not yet available. The local dealer was contacted and made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

I received a letter from FCA concerning recall 97A NHTSA recall 23V-654 and the directions for the recall suggest that I can do an OTA update or as the video linked in the recall suggest a download from [XXX] to correct this issue. I cannot get either resource to work to correct this issue described in the recall. This website and OTA updates for issues is a known problem with FCA products and suggests they do not care about correcting the metrics outlined in the recall. I would like for the file to be available or if they do not want them to be downloadable at least the OTA update system work or mail the files to the customer. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2022 Ram 2500. The contact received notification of NHTSA Campaign Numbers: 23V060000 (Electrical System), 22V835000 (Power Train), and 22V904000 (Structure); however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2022 Ram 2500. The contact received notification of NHTSA Campaign Number: 22V835000 (Power Train) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. Parts distribution disconnect.

the vehicle has been inspected by an independent engineer from Bosch, supplied by FCA (Fiat Chrysler Automobiles), it indicates that an expert assessment has been conducted. In this case, the following answers can be provided based on that information: 1. Components or systems that failed or malfunctioned: - Half shaft axle front left - Wheel assembly - Brake rotor disc - Suspension - Drive shaft - Transfer case - Right front axle shaft - Right front caliper - Right front caliper bolts 2. Availability for inspection upon request: The availability of the failed components for inspection may depend on the specific arrangements made between the vehicle owner and the independent engineer from Bosch. It is recommended to contact the engineer or FCA for further information regarding inspection availability. 3. Safety risks: Considering the multiple component failures mentioned, there is a significant safety risk not only to yourself but also to others. These failures can lead to loss of vehicle control, compromised braking, and potential accidents or collisions. 4. Confirmation by the independent engineer: Since the vehicle has been inspected by an independent engineer from Bosch, it suggests that the problems have been reproduced and confirmed. The engineer's evaluation should provide valuable insights into the nature and causes of the failures. 5. Inspection by manufacturer, police, insurance representative, or others: The information provided indicates that an independent engineer from Bosch, supplied by FCA, has inspected the vehicle. However, it is not specified whether the vehicle or its components have been inspected by other parties such as the manufacturer, police, or insurance representative. 6. Warning lamps, messages, or symptoms: Over the past months and throughout the last year, you have experienced multiple issues with the four-wheel drive system and e

The contact owns a 2022 Ram 2500. The contact received notification of NHTSA Campaign Number: 23V060000 (Electrical System) however, the part to do the recall repair was not yet available. The local dealer was contacted. Additionally, the contact called four other local dealers Galeana Chrysler Dodge Jeep Ram (14375 S Tamiami Trail, Fort Myers, FL 33912), Naples Chrysler Dodge Jeep Ram (6381 Airport-Pulling Rd, Naples, FL 34109), Sandy Sansing Chrysler Dodge Jeep Ram Milton (6348 Caroline Street, US-90, Milton, FL 3257, and Hill-Kelly Dodge Chrysler Jeep Ram (6171 Pensacola Blvd, Pensacola, FL 32505) and was informed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2022 Ram 2500. The contact received notification of NHTSA Campaign Number: 23V060000 (Electrical System) however, the part to do the recall repair was not yet available. An undisclosed dealer was contacted and confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that the part was not available. The contact had not experienced a failure. Parts distribution disconnect.