2016 RAM 2500 Complaints

2016 DODGE RAM . CONSUMER WRITES IN REGARDS TO DRAG LINK SAFETY RECALL. *LD THE CONSUMER STATED THE WELDED BOLTS FOR THE DRAG LINK WOULD CAUSE AN ISSUE WITH HAVING AN ALIGNMENT PERFORMED ON THE VEHICLE. *JS

TL* THE CONTACT'S HUSBAND OWNS A 2016 RAM 2500. WHILE THE VEHICLE WAS PARKED IN A DRIVEWAY, IT SHIFTED OUT OF PARK AND ROLLED IN REVERSE UP A SMALL HILL, CRASHED INTO A HOUSE, AND THE VEHICLE CAME TO A STOP ONLY BECAUSE THE DRIVER SIDE DOOR WAS OPEN WHICH STOPPED THE VEHICLE FROM REVERSING ANY FURTHER. THE CONTACT MENTIONED THAT THE DRIVER WAS UNLOADING AT THE TIME AND DID NOT SUSTAIN ANY INJURIES DUE TO THE FAILURE. THE VEHICLE WAS NOT TAKEN TO A DEALER OR AN INDEPENDENT MECHANIC FOR THE FAILURE. TESTING. THE VEHICLE WAS NOT REPAIRED. THE VEHICLE WAS PREVIOUSLY REPAIRED PER NHTSA CAMPAIGN NUMBER: 17V821000 (POWER TRAN) AT DAYTON ANDREWS DODGE CHRYSLER JEEP RAM DEALER, (LOCATED AT 2301 24TH ST N, ST PETERSBURG, FL 33713, (727) 321-0500). THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 31,000.

DRAG LINK HAS BEEN RECALLED ON MY PICKUP. WAS GIVEN WHAT WAS SUPPOSED TO BE A TEMPORARY FIX BY THE DEALERSHIP THAT INVOLVED WELDING THE NUTS TO THE ADJUSTER SLEEVE. NOW THERE IS A PERMANENT FIX AND I WAS TOLD BY CHRYSLER AND THE DEALERSHIP THAT THE WELD IS GOOD ENOUGH. I AM UNABLE TO HAVE MY VEHICLE ALIGNED DUE TO THIS WELD. I WILL BE UNABLE TO HAVE ANY FUTURE WORK THAT INVOLVES THE STEERING DONE DUE TO THIS WELD. IF THE WELD FAILS, I'LL BE LEFT ONCE AGAIN WITH A BAD DRAG LINK. HOW IS THIS ACCEPTABLE? THE NITS HAS TO BE TIGHTENED THREE TIMES BEFORE THEY WERE WELDED!

THE TRAILER BRAKE CONTROLLER DOES NOT APPLY THE TRAILER BRAKES ENOUGH TO SLOW THE TRAILER. I HAVE HAD THE BRAKE CONTROLLER SERVICED 3 TIMES UNDER WARRANTEE AND IT STILL DOES NOT WORK PROPERLY. MY TRAILER IS A 34 FOOT TRAILER MANUFACTURED IN 2016. THE TRAILER WOKS CORRECTLY WHEN TOWED BY MY FRIEND'S TRUCK AND THE TRAILER DEALERSHIP TOW VEHICLE. THE BRAKE CONTROLLER BARELY APPLIES A SLIGHT DRAG TO THE TRAILER BRAKES AT ALL SPEEDS. IT DOES NOT APPLY ADDITIONAL BRAKING FORCE WHEN SET AT THE MAXIMUM SETTING (+10) AND MANUALLY MOVED TO THE MAXIMUM BRAKING SETTING.

RECALL FIX FOR DRAG LINK, PER MANUFACTURER IS FOLLOWING YOUR REQUIREMENTS TO WELD ADJUSTMENT NUTS TO DRAG LINK ADJUSTER. NO PARTS AVAILABLE AT THIS TIME, NO FUTURE FIX IS UNDERWAY. I FEEL THIS IS AN UNACCEPTABLE FIX. WELDING A STEERING PART THAT IS DESIGNED TO BE ADJUSTABLE IS NOT A SAFETY FIX. I PURCHASED AN AFTERMARKET DRAG LINK AND REPLACED IT MYSELF UNTIL A SAFE FIX IS AVAILABLE. FCA REFUSED TO REIMBURSE ME FOR THE REPLACEMENT DRAG LINK. NOTE THE REPLACEMENT IS NOT WELDED, SUPER GLUED OR DUCK TAPED FIX. THE WELDING OF THE DRAG LINK WOULD REQUIRE IT TO BE CUT TO BE ADJUSTED AND THEN REWELDED. IF ANY FUTURE REPAIRS ARE REQUIRED A REPUTABLE REPAIR SHOP WILL NOT WORK ON THIS VEHICLE DUE TO THE POORLY DESIGNED FIX. THE ONLY REPAIR THEN WOULD BE THE DEALER WHO IS NOT A CERTIFIED WELDING COMPANY. IT WOULD NOT ALLOW ME TO TAKE MY VEHICLE FOR REPAIR OR MAINTENANCE TO ANY SHOP I WOULD WANT. I WAS UNAWARE THAT YOU ARE THE ONES THAT DESIGN A REPAIR AND NOT REQUIRE THE MANUFACTURER TO HAVE REPLACEMENT PART. I HOPE THE LUG NUTS OR STEERING WHEEL DOES NOT FAIL, THEY WILL WANT TO WELD IT ALSO. POOR DESIGN AND POOR FIX. I AM SURE THAT YOU WOULD NOT TRANSPORT YOUR CHILDREN, FAMILY MEMBERS OR GRAND CHILDREN IN A POORLY REPAIRED FIX.

THIS IS IN REFERENCE TO 19V-021. CHRYSLER'S FIX IS TO WELD A JAM NUT WHICH WILL NOT ALLOW THE VEHICLE TO HAVE AN ALIGNMENT. IF THE RECALL FIX BREAKS MY VEHICLE IN ANOTHER WAY IT IS NOT REALLY A FIX.

MY VEHICLE HAS WAS HAS BEEN COINED AS "DEAD PEDAL" THE TRUCK WILL HESITATE FOR A SECOND WHILE ACCELERATING. THIS PROBLEM HAS BEEN WELL DOCUMENTED BY MANY OTHER RAM DIESEL TRUCK OWNERS. THIS WILL HAPPEN WHEN MERGING INTO TRAFFIC OR CROSSING A STREET AND CAN BE VERY DANGEROUS.

CLOCKSPRING PROBLEM GIVING AN AIRBAG FAULT. HAPPENS DRIVING DOWN THE ROAD AND STATIONARY. STEERING WHEEL GENERALLY IN "STRAIGHT" DOWN THE ROAD POSITION

MY VEHICLE HAS A RECALL FOR THE DRAG LINK. WHEN I TOOK IT TO THE DEALER THEY WELDED THE DRAG LINK TOGETHER WITH THE STEERING WHEEL OFF CENTER. NOW I CANNOT ADJUST THE STEERING WHEEL. THIS IS DANGEROUS WHEN A NEW DRIVER USES THE TRUCK AND DOES NOT REALIZE THE STEERING WHEEL IS OFF CENTER. THE DEALER REFUSES TO CORRECT SAYING THIS PART OF AN ALIGNMENT. WHEN THE DEALER FIXES A SAFETY PROBLEM BY WELDING THE ADJUSTERS SHUT THEY SHOULD BE REQUIRED TO ADJUST THE STEERING BEFORE THEY REMOVE ALL CAPABILITY TO ADJUST.

TL* THE CONTACT OWNS A 2016 RAM 2500. THE CONTACT RECEIVED A RECALL NOTICE FOR NHTSA CAMPAIGN NUMBER: 19V021000 (STEERING). THE VEHICLE WAS TAKEN TRANSITOWNE JEEP CHRYSLER DODGE RAM WILLIAMSVILLE (7408 TRANSIT RD, WILLIAMSVILLE, NY 14221) AND THE DRAG LINK WAS WELDED SHUT. THE FOLLOWING DAY, THE DEALER INFORMED THE CONTACT THAT THE VEHICLE COULD NO LONGER BE ALIGNED DUE TO THE RECALL REPAIR. THE MANUFACTURER WAS CONTACTED AND ADVISED THE CONTACT TO CALL NHTSA TO FILE A COMPLAINT. THE VEHICLE WAS NOT REPAIRED. THE CONTACT HAD NOT EXPERIENCED A FAILURE.