2016 RAM 2500 Complaints

The contact owns a 2016 Ram 2500. The contact stated that while slowing down for traffic or traffic signals at approximately 10 MPH, the vehicle would stall. The contact stated no warning light was illuminated. The contact stated that several attempts were needed to restart the vehicle. The failure became constant and the vehicle had to be towed to a dealer. The contact had taken the vehicle to the same local dealer several times for the same failure. The dealer had diagnosed the failure and determined that the vehicle needed to have the Totally Integrated Power Module (TIPM-7) bypassed to a new TIPM relay. The vehicle had not been repaired. The manufacturer had not been informed of the failure. The contact researched online and related the failure to NHTSA Campaign Number: 14V530000 (Electrical System). The failure mileage was approximately 125,000.

Broke suspension on a pothole. After repair, Alignment shop would not align vehicle because Ram welded the Drag Link as part of their V06 recall so that it was no longer adjustable. Being that this is my primary vehicle, I had to purchase a new drag link so that my steering could be readjusted as well as have my tires wear properly. I asked Ram for Refund on this repair , but they responded that in order to get a refund, I would have had to be towed to a Ram dealership on my own dime, then wait for an official Ram part to come in which would cost me hundreds of dollars in rental cars and tow bills for an adjustable part that they welded to make non adjustable.

Previous FCA campaign #U30 of solonoid pack for transmission 68rfe has been completed in 2018 and in June of 2022 a transmission service technician stated the one from the recall was faulty and needed replaced. Upon replacement with OEM solonoid pack the truck went into limp mode and was locked into 4th gear. Vehicle is undrivable and at the dealer. After further inspection the solonoid issue caused the clutch pack to shed debris into the bottom on the transmission pan which just had a new gasket, filters and fluid less than 20 miles ago. Transmission tech stated the debris was no there and saw no evidence of failure to the clutch pack prior to the replacement of the solonoid. Now transmission has to be rebuilt at owned expense. Vehicle has 72,000 miles and is not used for towing or aggressive driving.

I was driving my truck on the freeway pulling a loaded stock trailer. The truck suddenly down shifted into fourth gear and the engine RPM’s maxed out! I almost crashed the truck because the momentum of the trailer pushed the truck sideways on the freeway. I had to avoid traffic and get to the shoulder. Truck would not shift out of fourth gear and truck shifted into 4WD low also on its own. Had truck towed to dealers ship and was told a shift solenoid went out. Because of that they now have to change the torque converter and replace the transmission from the damaged it caused. It is unknown if it damaged any of the engine components at this time or any other parts of the drivetrain. Now I’m stuck paying for a transmission because Dodge didn’t put a safety backup into their system to prevent this in case of a failure. I see that I am not the first person it’s happened to by reading the power train comments for this year truck.

A known issue is occurring across many vehicles where the ABS Braking system becomes non-working and illuminates the ABS - Service Electrical Braking System light along with disengaging the vehicle traction control. The part that needs to be replaced is on national backorder with no ETA of availability. In turn, this issue is causing my West Virginia State Vehicle Inspection to remain invalid as I cannot get a proper inspection due to the warning light. In addition, with the ABS not working, I am fearful of using my vehicle to transport my family, especially my toddler. This issue needs to be addressed by Chrysler Corp, but there have been no recalls nor even a TSB released referring to this issue. A quick search of Ram/Jeep/Dodge/Chrysler Forums shows that this is a very widespread issue affecting many vehicles. This presents a major safety issue, especially since it is considered an important safety feature preventing my vehicle from being inspected. This issue needs addressed ASAP by the company and repaired promptly.

The contact owns a 2016 Ram 2500. The contact stated while the vehicle was parked and running, she opened the front driver's side door and stepped on the running board with her body between the front driver's side door and the vehicle frame. The vehicle lunged forward independently, turned to the left and crashed into the front end of the passenger's side of the unoccupied vehicle parked next to it. The contact became trapped between the two vehicles and pinned between the driver's side door and the frame of her vehicle. The contact stated that the vehicle was squeezing continuously as if it had shifted into drive. The contact attempted to honk the horn by extending the keys on her left arm but was unsuccessful and started screaming for help. Two individuals arrived at the scene but could not unlock the door and were unable to break the front passenger's side window to unlock the door in order to extract the contact. The contact squeezed her body and reached out the unlock button on the driver's side door, and she unlocked the door. One of the individual got inside the vehicle, shifted into reverse and reversed slowly in order to release and extract the contact. The vehicle was parked. The contact was then extracted but was knocked unconscious. The contact was airlifted to the hospital where she was informed that she had sustained six broken ribs, damaged clavicle required surgery, damaged lungs due to squeezing, squeezed organs to one side of her abdomen, bruises on both glutes and bruised hips. A police report was filed. The vehicle was towed to the local collision center. The collision center informed the contact that the driver's side frame of the vehicle she was squeezed against was dented, which showed the severity of the squeezing. The local Chrysler dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 72,000.

I was involved in a single vehicle accident due to a medical issue. I hit a utility pole, took out a cyclone fence, proceeded across a front yard of a home then almost directly into a block retaining wall. I was wearing my seat belt. My airbags did not deploy but I have no idea how fast I was going. From the damage to the pole and the wall and my truck I had to be going a decent speed. The police report noted that when they arrived my foot was on the accelerator and the back wheels were spinning for what that’s worth.

Fuel gauge not accurate, reporting half a tank when the tank is full. Fuel gauge not working appropriately. Truck has 47,000 miles.

There has been an open recall on this vehicle since August 2021. It was reported to be by the dealership this is at that this was due to have a remedy to fix the SABIC in the 4th Quarter of 2021. IT has yet to have a remedy pushed out. I was also told that the Y55 recall is grouped together with the Y63 Recall. I agreed with the dealership in October of 2021 that I would purchase this vehicle, and they told me the recall remedy would be out the following month. I have been patiently waiting with no resolution from RAM, MOPAR or Chrysler. I have contacted the dealership several times a week, and they keep telling my that MOPAR has been contact by them and they are not returning phone calls. This can not be sold until it is fixed, due to a Stop Sale Issued with the Recall Notice.

It seems that this is a common problem on these trucks the HCU for the antilock braking system and the ABS module has to be replaced the traction control light comes on the ABS light comes on and the cruise control does not work.