2020 RAM 3500 Complaints
View complaints related to 2020 RAM 3500. The complaints found here are submitted by actual consumers with first hand experience. There are more than 120 complaints submitted for the 2020 RAM 3500. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.
-
2020 RAM 3500- Las Vegas , NV
As I was preparing to travel for the holidays comíng up, I was traveling to Texas to see family. I was driving around 65 mph when suddenly the truck started jerking and slowing down when the gas pedal would not give it power. The car behind slammed the brakes and in order to avoid hitting me had to went the the side of the highway. Before coming to a complete stop the truck a 2020 ram 3500 shut off and will not come off. The tow truck was able to scan the truck and the codes are for low fuel pressure and fuel pump. This was a very scary situation because I’m with all my family and not only did I put them in danger by this truck failing with out a notice of any kind but also put others like the vehicle behind in danger because the truck failed. I have look up and this seems to be a common issue with all the “new ram trucks” not sure why there is no recall yet. Hoping this gets looked at and something can be done for the safety of others
Source: NHTSA WEB SITE -
2020 RAM 3500- North Richland Hills, TX
I was on my way home from the local RAM Dealer last night, where I wanted to sell my truck (after inspecting it, they offered me $82K for it), when, spontaneously, my truck started to smoke from under the hood and literally burst into flames! I had to pull over and jump out to avoid being burned alive! I am so traumatized. I'm attempting to tow what's left of this truck to the dealer this morning. I hope FCA will take responsibility for this!
Source: NHTSA WEB SITE -
2020 RAM 3500- Hillsboro, OR
The contact owns a 2020 Ram 3500. The contact stated while hauling his fifth-wheel travel trailer driving up a hill the vehicle lost all power. The contact stated he had to maneuver over several lanes of traffic to move off the road safely. The police department was contacted and had the vehicle towed. The tow truck driver had to unhitch the trailer from the contact's vehicle to tow the truck to a dealer. The vehicle was towed to the dealer and diagnosed with a fuel sensor failure. The fuel sensor was replaced. The vehicle failed to start and was diagnosed with a fuel injection pump failure which had imploded sending metal fragments throughout the whole fuel system and into the fuel tank. The entire fuel system including the fuel tank and all fuel parts needed to be replaced. The contact stated that the dealer informed him of a notice that was sent to the dealer by the manufacturer of a fuel pump failure. The contact stated that he researched the failure online and found NHTSA Action Number: PE21021 (Fuel System, Diesel). The manufacturer was made aware of the failure and a case was opened. The failure mileage was 25,700. Replacement parts are same defective CP 4 injector pump that already failed and now metal shavings are contaminating fuel system leading to another implosion and possible accident or death FCA has no fix available making truck unsafe to operate. STELLANTIS, FCA and STAR are well aware of this CP 4 safety issue in 2019 and 2020 trucks.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2020 RAM 3500- Licking , MO
I was driving my truck towing a fifth wheel trailer weighing over 10,000 pounds on a rural state highway in Missouri with many hills, curves, and little to no shoulders. As I was traveling on a downhill slope at approximately 60mph my engine abruptly died with no warning, causing an immediate loss of power steering, power brakes, and engine brake. I began applying heavy pressure to the brakes slowing the vehicle and began looking for a side road to pull into. I came upon a driveway with an open gate into a field. With much manual force to the steering wheel and brakes I was able to guide the truck and trailer off of the highway into the field to a stop. I was fortunate to not have anyone stopping in front of me as I am certain I would not have been able to avoid a crash with the heavy load and no power. The vehicle was towed to a local Ram dealer and metal shavings were discovered in my fuel system. Repairs were made under warranty and after 6 weeks my truck was returned to me with a new fuel system including a new Cp4 fuel pump that had failed. This happened on 08/28/2020 and the truck had 8900 miles at the time. On 09/15/2021 I discovered metal shavings in my rear fuel filter while doing routine maintenance The truck was running appropriately with no codes or warning lights, it had 72000 miles at the time. I telephoned a local Ram dealer shop and was told it would have to be diagnosed at their shop. Unwilling to take the chance with another Cp4 pump failing I contacted a local diesel shop and was advised to replace the Cp4 with a Cp3 pump. I purchased a new Bosch Cp3 fuel pump specifically modified for replacement of Cp4 pumps in Ram trucks and paid the local shop myself to do the work. I still have my second Cp4 pump in my possession.
Source: NHTSA WEB SITE -
2020 RAM 3500- Canyon Country, CA
Truck was with high pressure pump issues, spent $2600 in rental truck, $400 i. Towing truck and about one month with no truck, Chrysler still doesn't want to pay me back, this is my second truck with same issue, previous truck was a 2019 3500 ram having the same problem when truck was with only 4,000 miles on it. Now they repaired my truck but now i feel like my truck lose already torque, is using more diesel and more DEF.
Source: NHTSA WEB SITE -
-
2020 RAM 3500- North Plains, OR
I was towing a light trailer (4000 lbs) on I-5 in Oregon on 10/22 when I slowed from ~58 mph to about 45 mph to allow a hasty SUV to merge from the right. When I tried to resume speed the truck seemed "stuck" at 45mph for quite some time. I gave it full throttle and it didn't accelerate. I tapped the brakes, turned off cruise control and it felt like there was no power at all, like it was freewheeling. Finally the motor 'caught' and it accelerated to highway speed. I looked for the problem online and believe this may be related to the CP4 fuel pump issues. Is it safe to continue driving or should I take the truck to a dealer or what? There is no recall yet and I hear the dealership people are telling owners that it is from bad fuel and not covering it! I only have 12128 miles on the truck, please advise!
Source: NHTSA WEB SITE -
2020 RAM 3500- YUMA, AZ
At 28,000 miles my vehicle in the middle of the Highway going up a hill stall and suddenly lose boost or was inoperable to safety get out of the road. i was able to do a unsafe maneuvering to get out of the way with the momentum of speed that i have at the moment When this happened a message on my screen said power boost service require,contact your dealer. Later and after the poor customer service in moreno valley ca. And yuma az my local dealer provide., i found out that my fuel pump(cp4) went down,completely destroyed on the inside sending metal particles trough the entire fuel system. 93,000 and again my vehicle went out of service exactly for the same reason(cp4) And now at 135,000 miles my vehicle is down again the reason is idle pulley broke and my serpentine belt got damage at the same time serpentine belt damage my crank sensor and i found out today that is on back order until the 3th week of november I have all documents in order to support the complaints im here to submit today
Source: NHTSA WEB SITE -
2020 RAM 3500- Huntington Beach , CA
CP4 High Pressure Fuel pump failed @17,500 miles. I was pulling an 18,500 LB 5th wheel trailer on a 2- lane state highway. Stranded family for 6 hours in 106 degree heat until multiple tow trucks arrived to move both vehicles. 85 miles to nearest dealer. Most expenses covered by Good Sam Platinum coverage. Replacement parts and service covered by Cummins. 35 gallons of diesel NOT replaced by FCA, 5 days lodging and towing expenses denied by FCA. No warning lights or messages prior to failure. No prior issues. 3 identical trucks delivered same day to Redding, CA dealer. Crown Motors with same issue. Blame placed on Low Sulfur diesel mandated by State of CA.
Source: NHTSA WEB SITE -
2020 RAM 3500- Yuma, AZ
The component that failed was the CP4 high pressure fuel pump. Currently the truck is at RAM dealer in Champaign IL. If I need the part, I can ask for it. When the fuel pump failed, the engine quit running and I lost power steering and brakes. I was not in a high traffic area at the time and was able to get the truck w/42 foot 5th wheel travel trailer to side of highway safely. The issue with the fuel pump has been confirmed by Hendershot Chrysler Dodge Jeep RAM' Has the vehicle component been inspected by manufacturer? UNKNOWN Just prior to the engine shutting off, the following message appeared on the dash, Exhaust Service Required — See Dealer Now— This message indicates regeneration has been disabled due to a system malfunction.
Source: NHTSA WEB SITE -
2020 RAM 3500- Shoreview, MN
CP4 fuel injection pump and entire fuel system. The original part was replaced by the dealership under warranty. I am 400 miles away from that dealership and the truck has broke down with another suspected CP4 failure and will need a full fuel system replacement again. I do not know if it would be available for inspection upon request. It put my safety and my passenger’s safety at risk as it died while moving on a freeway at night. The problem was confirmed at the first dealership, it is currently pending at the current dealership. The part was inspected at the first dealership that did the warranty work. There were no warning lamps, messages, or other symptoms of the problem prior to the failure. The incident date below, mileage, and invoice is from the FIRST incident. The second incident occurred on 10/18/2021 at approximately 101,300 miles and is currently waiting to be inspected at a dealership.
Source: NHTSA WEB SITE