2020 SUBARU ASCENT Complaints

Vehicle: 2020 Subaru Ascent Issue: Cold weather software glitch If you are operating an Ascent or possibly other Subarus with the CVT in temperatures below -20F be certain to have either a small wrench or the appropriate size socket to loosen the ground clamp on the battery ground cable with you so you can employ what I call the magic Windows fix wherin one completely de-powers the system and reboots it. With all the ridiculous interconnections, if the CVT temperature sensor thinks the tranny is too cold the cars operating system looses it mind and goes completely bonkers. Subaru obviously did no cold weather testing. We have had 2 failures in cold weather. It only happens at temperatures well below the-20F range. The first case happened last year while driving after being stopped for a couple of hours. Everything seemed normal and then suddenly several warning lights came on and all of the safety systems and the eyesight system shut down. The car ran and drove, but none of the associated systems would work. No traction control. No cruise control. Several other systems. The only solution was to disconnect the battery and get this rolling computer to reboot. This was a temporary fix as the condition repeated itself although the car was driveable but with none of the safety systems operational. This year we were out in cold weather, -25 to -32. We went to a place to have lunch and when I went to restart the car the app failed to do so. So I put on all my gear and went out to start it manually. It would not start and all the warning lights were on and the radiator fan was running full tilt at -25F with the car off. I tried twice to get it going by pulling the battery cable to get it to reboot. Evidently when this happens you must leave the battery disconnected long enough (about 5 minutes) for all the capacitors in the electronics to drain. Once restarted, the car drove normally but we did not shut it down for any reason for the rest of the day.

The contact owns a 2020 Subaru Ascent. The contact stated that the vehicle was taken to the local dealer for routine service, where it was discovered that the cam carrier was leaking from the engine. While having an oil change, the mechanic informed the contact that there were no further leaks found. There were no warning lights illuminated. After driving and parking the vehicle, there was an abnormal odor of oil coming from the vehicle. The vehicle was taken to the local dealer, where it was diagnosed that an overhaul of the engine was needed. While driving, there was an abnormal oil-burning odor coming from the vehicle. The vehicle was taken to another local dealer, Adventure Subaru (2269 N Henbest Dr, Fayetteville, AR 72704), who confirmed there was no recall coverage for the failure. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 120,000.

Car is making loud noises while going over uneven roads. Only have 64,000 miles on it and I need to replace the struts.

Unknown PCV valve failure caused catastrophic engine failure on interstate highway (70 mph speed limit). Luckily there was room to pull to the side and no one got hurt. This part was recalled in 2019 models due to possible loss of control from engine failure. Dealer tore down engine to determine cause for possible warranty coverage and found the PCV valve was the cause of engine failure. There were no warning lights or indications of any problems before this.

The contact owns a 2020 Subaru Ascent. The contact stated that while driving at an undisclosed speed, there was an abnormal rumbling sound coming from the undercarriage while driving over bumps in the roadway. No warning light was illuminated. The vehicle was taken to an independent mechanic who diagnosed the vehicle and determined that the front struts had failed and needed to be replaced. The contact related the failure to TSB: 059024. The vehicle was not diagnosed. The manufacturer was not made aware of the failure. The failure mileage was unknown.

The contact owns a 2020 Subaru Ascent. The contact stated that while depressing the accelerator pedal to make a turn, the vehicle hesitated to respond. There was no warning light illuminated. The vehicle was taken to the dealer, but was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 61,900.

The driver's side headlamp assembly (one complete piece, LED lighting) has a thin strip at the top that is used for daytime running lights. These are automatically on when the vehicle is on and it's not yet dark. In early 2024, this driver's side thin strip daytime running lights stopped working entirely. I've learned that the entire headlamp assembly must be replaced, rather than being able to just change out the daytime running component or replace a light bulb like one used to be able to do. I've taken the vehicle in for an estimate, and the Nashville, TN Subaru dealership quoted me about $1700 to replace the headlamp assembly, with nearly $1,000 of that being for the light itself, and the rest being labor. The technician at the Subaru dealership was aware of this problem, with many others coming into the shop for the same thing, and he advised complaining directly to Subaru. There are aftermarket options for $200 but the labor is still excessive. From researching online about how to find the aftermarket options, I've learned from a quick google search, lots of posts on Reddit and Facebook, among other forums, of other vehicle owners of this year and the years surrounding it that it is a very frequently-occurring problem, related to it being too close to something in the engine- and others reported that this has happened multiple times to their same vehicle! I called Subaru of America to complain and ask for a Good Will replacement, but they said they would not be able to assist me as I was beyond 3 years/50k miles, and that I would have to go with the Subaru of America option. Please look into this and find that this is a common problem and the remedy should not be stuck to the consumer, with such an exorbitant bill. Subaru should address this known problem and a recall should be made so that we may have this corrected/those who have had to pay for it can be compensated. Thank you!

My 2020 Subaru Ascent experienced a sudden failure of critical safety systems due to CVT fluid leaking through the transmission pressure switch into multiple electrical components. This fluid leak damaged several wire harnesses and the Engine Control Module (ECM). The check engine light came on and all Eyesight safety features disabled. Subaru has confirmed this will cost over $9,400 to repair. This issue appears to be related to known Subaru Technical Service Bulletins, including TSB 16-103-16R and TSB 02-170-17R, and matches the description in NHTSA Campaign WUV-07. Subaru of America has refused to fully cover the repair, even though my car is well maintained, has only 54,000 miles, and is just 4 months outside the powertrain warranty. This is not normal wear—it’s a serious defect that causes electronic failure and disables safety systems while driving.

The driver front seat bottom frame has came loose and rocks back and forth when driving, especially during start and stops. It was serviced and the dealer stated the movement comes from the side rails of the seat and is referenced via bulletin 12-288-20 stating its a known issue and the frame has been redesigned for this issue. After research, this seems to occur with a number of Subaru models, but the defect has not been covered by Subaru. The movement causes concern if an accident were to occur and should be considered a manufactures defect with replacement being covered by Subaru.

Extreme rattle/clunking driving over bumps especially on dirt roads. Seems to be many people are having this issue. I know of another co worker who has a 2020 ascent making the same noise. Apparently there is a strut issue