2019 TESLA MODEL 3 Complaints

2019 TESLA MODEL 3. CONSUMER WRITES IN REGARD TO TRUNK HARNESS SAFETY RECALL. THE CONSUMER REQUESTED INFORMATION REGARDING WHEN THE HARNESS MAY BE AVAILABLE.

Tesla software update 2022.24.6 is an update that forces the vehicle to use Tesla Vision for Autopilot adaptive cruise control. The driver does not have the option to disable auto high beam features and the software is not accurate enough to prevent flashing and high beaming of other drivers. This hazard has occurred at least 5 times within two days of receiving the update. A hazard is created in two different ways: - blinding approaching vehicles, including turning on high beams when approaching vehicle is in direct area of glare - flashing high beams when following other vehicles at a close distance, distracting and blinding the lead vehicle While this problem has not been verified by a dealer, auto high beams while using Autopilot cannot be disabled and many other drivers are reporting similar issues in online forums. There is no warning or way to adjust the feature. This will likely lead to a collision because approaching drivers cannot see through glare.

Pursant to NHTSA Recall 21V-00D, I received notice of recall on my Tesla Model 3 in a letter dated 2/15/2022. I have not received any further communication regarding a repair in the the 7 months since, which in my estimation is beyond a reasonable time to address a recall notification. I am thereby submitting a NHTSA complaint that Tesla has failed to remedy this defect within a reasonable time, as outlined in the recall notice. Please advise any additional steps I may need to take to register or advance my complaint.

Car is on cruise control on a two lane highway, posted speed 55 mph. It has ghost emergency stops on cruise control not auto pilot . My car doesn’t have it. It renders a simple feature unusable.

I have experience phantom braking on my Model 3 many times when I used FSD(full self drive) on the freeway. The car just randomly slows down / decelerates abruptly even if there are no obstacles or other cars in front. This results in a serious situation when the vehicle behind may ram into you causing a fatal accident. I have always reported this issue using voice control REPORT BUG and got acknowledgement saying THANKS FOR THE FEEDBACK. But I have never heard from Tesla that they have fixed or are fixing it. This issue is happening almost every time I used FSD on freeway even today (Aug 30, 2022)

The “auto-defogger” came on when the windshield was not fogged up and started to fog up the windshield instead of de-fogging it. It remained on the rest of the day and the only way I could figure out to get my window to stop fogging up was to turn off AC entirely. If I turned it back on, it immediately started “auto-defogging” which just kept fogging up my windshield. It was a dangerous situation trying to drive while the car was fogging up it’s own windshield. I contacted Tesla to look into it and they would not look at it under warranty.

My friend was driving the vehicle (a 2019 Tesla Model 3) while it was engaged in Full Self-Driving Beta 10.12.2 mode. The vehicle made a turn left and found itself in a lane that was coned off. Traffic was queuing in the adjacent lane. The vehicle edged forward into the closed lane and waited to join the lane to the right. Even though other drivers were giving way, the vehicle failed to move. The driver took manual control in order to complete the manoeuvre. There is Go_Pro video here - https://vimeo.com/738880343/09033b5c2a

My friend was driving the vehicle (a 2019 Tesla Model 3) while it was engaged in Full Self-Driving Beta 10.12.2 mode. The vehicle approached a busy intersection to turn left. Although drivers were giving way to the vehicle, it failed to complete the turn in a timely manner. The vehicle edged forward and then rapidly made the turn at 12mph . The driver had to take over as the FSD made the turn too sharply and too close to a bollard. There is Go_Pro video here https://vimeo.com/738682868/d5b572a69d

My friend was driving the vehicle (a 2019 Tesla Model 3) while it was engaged in Full Self-Driving Beta 10.12.2 mode. The vehicle stopped short of a STOP sign at a junction then slowly moved to the middle of the junction, failing to make a right turn. After manual re-routing the vehicle brakes for no reason other than a pedestrian is close by. The vehicle then fails to make a left turn successfully, cutting the corner. There is Go_Pro video here.. https://vimeo.com/738680260/7c4eeba7e2

My friend was driving the vehicle (a 2019 Tesla Model 3) while it was engaged in Full Self-Driving Beta 10.12.2 mode. After successfully crossing a junction the vehicle accelerated too quickly on a narrow residential road with another vehicle approaching from the opposite direction. The vehicle was travelling at 27 mph when it was forced to brake hard. There is Go_Pro footage of the incident here... https://vimeo.com/738677992/0a3c3d4713