2025 TOYOTA TACOMA Complaints

Vehicle recalled, left at Dealership on October 10th 2025. Dealership and Toyota corporate have failed to rectify the recall.

*Steering system - tie rod / steering nut lock was loose and discover after alignment service * Loose tie rod nut created a potential safety risk because it involves a steering component related to vehicle control. This could have put me, my passengers, and others drivers at risk if the condition had worsened while driving. *No, the condition has not yet been confirmed by a dealer or independent service center. I noticed abnormal steering/handling, inspected the vehicle myself, and discovered a loose tie rod nut. The vehicle is available for inspection upon request. *No the vehicle I available upon request *No

Driver's side interior door handle mechanism broke during normal usage at 8 months/6,300 miles. Breakage occured within the door panel, leaving a non-functioning handle. After breakage, the door cannot be opened from the inside of the vehicle and the occupant cannot easily exit the vehicle.

Less than 5000 miles - seat popping and cracking noise. If you look it up online, a lot of the 4th Gen Tacomas are doing this but when you take it to a dealership they say that is normal. It feels like the seat will break and moves around alot but Toyota will not acknowledge the issue at the dealership and has no fix. Seems unsafe.

The contact owns a 2025 Toyota Tacoma. The contact received notification of NHTSA Campaign Number: 25V656000 (Power Train); however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer, where it remained since October 2025, while the contact drove a rental vehicle. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

My 2025 Toyota Tacoma engaged the emergency braking/pre-collision system system while my vehicle was going under 10 mph on a steep road in winter conditions. My vehicle was completely under control before the system engaged and there was no risk of a collision with any vehicles in front of me. The emergency braking system engaged and rendered my vehicle completely out of control. I tried desperately to pump the brakes in hopes I could regain control of the vehicle, but the brakes were fully locked. Had the brakes dis-engaged, I could have easily avoided the collision. The car not only did not decelerate, it accelerated down the hill while the brakes were locked for several seconds. My vehicle eventually slid into another vehicle that had been parked on the side of the road. From doing extensive research I believe a perfect storm of events caused this malfunction. Previously on this day, several inches of snow had fallen. The road had not been plowed and cars were parked on the side of the road. There was also a curve in the road near my vehicle's collision where the other vehicle was parked. My windshield was also still defrosting in the uppermost section near the rear view mirror. It is also possible the radar block on the front of the vehicle had snow or ice on it. It was also actively snowing. From what I have read, any of the above factors can cause a malfunction in the emergency braking pre-collision system. I had never been in an accident in over 20 years of driving and my vehicle did the least safe maneuver it could have in the given situation. There is no circumstance where one would purposefully slam the brakes on a snowy/icy down hill road if they know how to drive in the snow (even if you were going under 10mph as I was). At the most basic level of failure, I can't imagine this system should ever engage if going as slow as I was. Also, the system is designed to decelerate (was accelerating) and I was pumping brakes in effort to disengage

On Sunday March 22, 2025 at around 1340, I was leaving my house and driving on a small incline and noticed my vehicle had a jerk when down shifting. This happened four times while traveling up hill. I have not yet had any repeat issues since this date.

The contact owns a 2025 Toyota Tacoma. The contact received notification of NHTSA Campaign Number: 25V656000 (Power Train); however, the part to do the recall repair was not yet available. The local dealer was contacted but the vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

My rear backseat driver’s side door handle broke on March 16th, 2026. I either have to roll down the window and open the door from the outside or I have to let passengers out from exiting from the front seat. I took it in for inspection by the dealer, West Kendall Toyota on March 17th, 2026. They had to order a new part. They tried repairing it on March 31, 2026 but failed to do so and had to reorder the part. It is still broken as of today April 1st, 2026. My front seat driver’s side door handle also broke in August of 2025 and I could only get out through opening the window and unlatching the door from the outside door handle. This is a serious safety issue as passengers could become trapped should the car be hit on the other side and if even more so if the power goes out on the car. I feel Toyota is not doing enough to fix the issue and is not making a quick effort to repair this and is showing a lack of concern for consumer safety.

transmission is very rough, especially when going into a stop to where there is a loud clunk, and feels like a bowling ball falling out of the transmission. this happened from new until now.