CHEVROLET IMPALA Recalls

Jun 23, 2004 – CERTAIN PASSENGER VEHICLES WERE PRODUCED WITH LOWER THAN SPECIFIED TORQUE ON BOTH FRONT BRAKE CALIPER TO STEERING KNUCKLE ATTACHMENT BOLTS. WITH IMPROPER TORQUE, THE CLAMP LOAD AT THE JOINT MAY NOT BE ADEQUATE TO PREVENT MOVEMENT BETWEEN THE CALIPER BRACKET AND KNUCKLE.

Feb 24, 2004 – ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH 3800 V6 (L36) ENGINES AND CERTAIN DELPHI FUEL PRESSURE REGULATORS, THE REGULATORS HAVE A MUCH HIGHER THAN USUAL RATE OF FUEL LEAKS. A LEAK CAN ALLOW FUEL TO ENTER THE INTAKE MANIFOLD THROUGH A VACUUM LINE. IF THE ENGINE DOES NOT START WHEN CRANKED, THE FUEL FROM THE LEAKING REGULATOR AND A MISTIMED SPARK CAN CAUSE A BACKFIRE.

Feb 14, 2003 – ON CERTAIN MINI VANS, PASSENGER AND SPORT UTILITY VEHICLES, SOME OF THESE VEHICLES HAVE A DRIVER'S SIDE AIR BAG THAT MAY NOT DEPLOY AS DESIGNED. IN ADDITION, THE AIR BAG INFLATOR COULD RUPTURE.

Aug 09, 2002 – CERTAIN PASSENGER, MINI VANS, AND SPORT UTILITY VEHICLES HAVE AN AIR BAG INFLATOR ON THE DRIVER'S SIDE THAT COULD FRACTURE AT A WELD DURING A DEPLOYMENT.

Apr 24, 2001 – VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A 3.4L ENGINE AND NON-ANTILOCK BRAKING SYSTEM (ABS). THESE VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 301, "FUEL SYSTEM INTEGRITY." A FUEL RETURN LINE CAN BECOME SEVERED IN A FRONTAL COLLISION, RESULTING IN FUEL SPILLAGE.

Nov 13, 2000 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME OF THESE VEHICLES EXHIBIT A CONDITION IN WHICH THE DRIVER SIDE IMPACT AIR BAG INFLATOR SEPARATES FROM THE AIR BAG MODULE DURING DEPLOYMENT.

Aug 29, 2000 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE AIR BAG SENSING AND DIAGNOSTIC MODULES (SDM) COULD EXPERIENCE A MEMORY ERROR RESULTING IN THE AIR BAGS NOT DEPLOYING IN A CRASH SITUATION.

Aug 07, 2000 – VEHICLE DESCRIPTION: PASSENGER VEHICLES, LIGHT DUTY TRUCKS, SPORT UTILITY VEHICLES, AND MINI VANS EQUIPPED WITH TRW SEAT BELT BUCKLE ASSEMBLIES. THE BUCKLE BASE OF THESE SEAT BELT ASSEMBLIES WERE NOT PROPERLY HEAT TREATED AND THEREFORE DO NOT PASS THE LOAD BEARING REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES."

Aug 19, 1983 – ACCELERATOR PUMP LEVER RETAINING PIN MAY LOOSEN AFTER REPEATED HEAVY ACCELERATOR PEDAL APPLICATIONS. THIS COULD CAUSE THE THROTTLE TO BECOME STUCK IN THE OPEN POSITION.

Jan 03, 1982 – UNDER CERTAIN VEHICLE OPERATING CONDITIONS, THE GOVERNOR WEIGHT RETAINER IN THE INJECTION PUMP MAY FAIL. THE THROTTLE VALVE COULD STICK, PREVENTING RETURN TO IDLE AND SHUT DOWN OF THE ENGINE BY THE DRIVER.