BMW 530 Recalls

Oct 24, 2003 – ON CERTAIN PASSENGER VEHICLES, A MICROPROCESSOR IN THE AIR BAG CONTROL MODULE, WHICH ACTIVATES THE FRONT AIR BAGS, THE SIDE AIR BAGS, THE FRONT SEAT SAFETY BELT PRETENSIONERS, AND THE BATTERY SAFETY TERMINAL, MAY HAVE A MALFUNCTION THAT COULD LEAD TO AN UNINTENDED ACTIVATION OF ONE OR MORE OF THESE COMPONENTS.

May 16, 2002 – ON CERTAIN PASSENGER VEHICLES, THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.

Feb 19, 2002 – ON CERTAIN PASSENGER VEHICLES, DURING THE STRUT MOUNT MANUFACTURING PROCESS, THE THRUST BEARING WAS NOT PROPERLY POSITIONS AND SECURED. IF THE SUSPENSION IS FULLY UNLOADED, THE FRONT STRUT COULD SEPARATE FROM THE UPPER MOUNT.

Nov 26, 2001 – VEHICLE DESCRIPTION: DURING THE TIRE MOUNTING PROCESS ON CERTAIN PASSENGER VEHICLES BUILT WITH STANDARD (NON-SPORT) SUSPENSION AND EQUIPPED WITH CONTINENTAL CONTITOURINGCONTACT CH95 ECOPLUS TIRES, SIZE 225/65R16 95H, HAVING DOT CODES 4001, 4101, OR 4201, THE OUTER SIDEWALL SURFACE OF THE TIRES MAY HAVE BEEN CUT BY A SHARP EDGE. OPERATION OF THE VEHICLE OVER A LONG PERIOD OF TIME COULD LEAD TO A REDUCTION OF INFLATION PRESSURE.

Jun 21, 2001 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.

Aug 04, 1998 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. A MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT, SUCH AS A THERMOSTAT, WATER PUMP, OR FAN BELT, CAN RESULT IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND SYSTEM PRESSURE. IF THE INDICATIONS OF A CRITICAL OVERHEATING CONDITION IS NOT NOTICED BY THE DRIVER, IT IS POSSIBLE THAT DAMAGE TO, OR FAILURE OF, A COOLANT SYSTEM COMPONENT COULD OCCUR.

Aug 19, 1997 – THE CRUISE CONTROL AND THROTTLE CABLES ARE ATTACHED TO THE SAME THROTTLE VALVE ACTUATING LEVER AT THE THROTTLE HOUSING. IT IS POSSIBLE THAT THE PLASTIC BUSHING ON EITHER CABLE COULD BREAK DUE TO ENVIRONMENTAL INFLUENCES COUPLED WITH VIBRATION. IF THE BUSHING BREAKS, THE OUTER CABLE HOUSING CAN SEPARATE FROM THE BUSHING. IN THIS CASE, DURING APPLICATION OF THE THROTTLE PEDAL WITHOUT CRUISE CONTROL BEING ENGAGED, THE OUTER TUBE COULD CATCH ON THE EDGE OF THE BROKEN BUSHING.

Jul 01, 1996 – THE BRAKE LIGHT SWITCH CAN FAIL ALLOWING THE SWITCH TO REMAIN IN THE "BRAKE LIGHTS OFF" POSITION OR IN THE "BRAKE LIGHTS ON" POSITION.

Mar 13, 1978 – DUE TO A MATERIAL STUCTURAL DEFECT, THE RUBBER SEAL BETWEEN THE METAL VALVE STEM AND RIM ALLOWS SLOW SEEPAGE OF AIR AROUND THE VALVE BASE.

May 06, 1977 – THE INVOLVED VEHICLES DO NOT COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 118, "POWER-OPERATED WINDOW SYSTEMS". THE POWER-OPERATED WINDOW SYSTEM WAS EQUIPPED IN ERROR WITH A RELAY WHICH MAKES IT POSSIBLE TO OPERATE THE WINDOWS WHEN THE IGNITION KEY IS SWITCHED OFF, OR REMOVED.