FORD E-350 Recalls

Apr 20, 2011 – FORD IS RECALLING CERTAIN MODEL YEAR 2011 E-150, E-250, E-350 AND E-450 TRUCKS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS." IT MAY BE POSSIBLE THAT UNDER UNUSUALLY HIGH LOADS, SUCH AS DURING A CRASH, THE DRIVER POWER SEAT TRACK WORM GEAR MAY FRACTURE.

Feb 24, 2011 – BRAUN IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2011 PARATRANSIT VANS BUILT ON FORD E-350 CHASSIS FROM APRIL 27, 2005, THROUGH JULY 29, 2010, EQUIPPED WITH CARRIER GENV EM-1 EVAPORATOR UNITS (EM-1) MANUFACTURED FROM JANUARY 1, 2006 THROUGH DECEMBER 2010, CONTAINING A DELPHI PACK-CON III FUSE HOLDER IN AN ALLIED MOTION MOTOR ASSEMBLY; EM-1 UNIT PART NUMBERS 77-62112-XX AND 77-62512-XX, STARTING WITH SERIAL NUMBER KNT90890232 TO SERIAL NUMBER NNE91230058. DUE TO TIME, TEMPERATURE, AND/OR VIBRATION, THE FUSE MAY LOOSEN IN THE FUSE HOLDER RESULTING IN HIGH RESISTANCE AND ARCING.

Jun 17, 2010 – ACCESS OPTIONS IS RECALLING CERTAIN TRUCKS AND VANS BUILT ON FORD E150, E350, TOYOTA SIENNA, AND DODGE GRAND CARAVAN CHASSIS AND EQUIPPED WITH VMI/RICON 6-WAY POWER SEAT BASES. THE SIX WAY POWER SEAT BASE MAY HAVE A DEFECTIVE (COLD) WELD ON THE PIVOT PIN WHICH IS WELDED TO THE SWIVEL PLATE. THE WELD COULD FAIL.

Jun 04, 2010 – MOBILITY TRANSPORTATION (MTS) IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 CONVERSION VANS BUILT ON FORD E150, E250, AND E350 CHASSIS FROM SEPTEMBER 16, 2008 THROUGH APRIL 15, 2009 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.

Jun 04, 2010 – MOBILITY TRANSPORTATION (MTS) IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 CONVERSION VANS BUILT ON FORD E150, E250, AND E350 CHASSIS FROM SEPTEMBER 16, 2008 THROUGH APRIL 15, 2009 AND FITTED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS. DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION, SHOULD THE "UP" BUTTON BE RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL AND MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.

May 13, 2010 – MOBILITY WORKS IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 CONVERSION VANS BUILT ON FORD E150, E250, AND E350 CHASSIS AFTER NOVEMBER 2007 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.

May 10, 2010 – MOBILITY WORKS IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 CONVERSION VANS BUILT ON FORD E150, E250, AND E350 CHASSIS AND CHEVROLET 2500 CHASSIS AFTER NOVEMBER 2007 AND FITTED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS. DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION, SHOULD THE "UP" BUTTON BE RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL AND MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.

Apr 15, 2010 – COMM-TRANS IS RECALLING CERTAIN MODEL YEAR 2007-2009 ADA CONVERSION VANS BUILT ON FORD E-150, E-250, AND E-350 CHASSIS BETWEEN DECEMBER 7, 2007 AND DECEMBER 23, 2009 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.

Apr 15, 2010 – COMM-TRANS IS RECALLING CERTAIN MODEL YEAR 2007-2009 ADA CONVERSION VANS BUILT ON FORD E-150, E-250, AND E-350 CHASSIS BETWEEN DECEMBER 7, 2007 AND DECEMBER 23, 2009 AND FITTED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS. DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION, SHOULD THE "UP" BUTTON BE RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL AND MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.

Apr 02, 2010 – ELKHART COACH HAS NOTIFIED NHTSA OF A DEFECT IN CERTAIN TRANSIT BUSES FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.