JAGUAR XJ Recalls

Mar 14, 2014 – Jaguar Land Rover North America, LLC (Jaguar) is recalling certain model year 2013 XF and XJ vehicles manufactured March 26, 2013, through April 10, 2013. In these vehicles, the certification label that is intended to specify the required Gross Vehicle Weight Rating (GVWR), Gross Axle Weight Rating (GAWR) front, Gross Axle Weight Rating (GAWR) rear, the manufacture date and country of manufacture is absent. Thus, the vehicles do not conform to Part 567, "Certification."

Nov 12, 2010 – JAGUAR IS RECALLING CERTAIN MODEL YEAR 2010-2011 XJ VEHICLES MANUFACTURED FROM JULY 28, 2009, THROUGH NOVEMBER 3, 2010. THE FRONT WIPER ARMS TO SPINDLE FIXINGS WERE NOT TORQUED TO SPECIFICATION DURING MANUFACTURING. AS A RESULT, THE SECURING NUTS COULD FAIL TO PERFORM AS INTENDED, RESULTING IN A LOSS OF WIPER ARM SYNCHRONIZATION AND A CLASH OF THE WIPER ARMS.

Apr 30, 2009 – JAGUAR IS RECALLING 14,551 MY 2004 XJ VEHICLES. A POTENTIAL CONCERN HAS BEEN IDENTIFIED WITH THE INSTALLATION OF A NOISE VIBRATION AND HARSHNESS (NVH) PAD FITTED TO THE UNDER TRAY AND ITS INTERACTION WITH THE REAR UNDER FLOOR BRAKE PIPES, REAR CROSS MEMBER BRAKE PIPES, AND THEIR UNIONS. A REVIEW OF VEHICLE BUILD CONDITIONS PROVIDES EVIDENCE THAT A TOUCH CONDITION CAN EXIST BETWEEN THE UNDER FLOOR AND CROSS MEMBER BRAKE PIPES AND THE NVH PAD AT THE REAR OF THE UNDER FLOOR UNDER TRAY. WHERE THE TOUCH CONDITION EXISTS, WATER AND DIRT CAN COLLECT AND BE HELD IN CONTACT WITH THE PIPES AND THEIR UNIONS, ABRADE THE CORROSION PROTECTION AND REDUCE THE CORROSION LIFE OF THE PIPES ACCORDINGLY.

Sep 19, 2006 – SOME PASSENGER VEHICLES MAY HAVE FUEL TANKS IN WHICH THE FUEL DELIVERY MODULE (FDM), JET PUMP MODULE (JPM, AND/OR CLUSTER VALVE (CV) SEALS ARE NOT PROPERLY RETAINED IN THE FUEL TANK. THIS MAY RESULT IN ILLUMINATION OF THE MALFUNCTION INDICATOR LAMP (MIL), OR A FUEL ODOR.

May 19, 2006 – CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.

Jan 25, 2006 – ON CERTAIN SEDANS EQUIPPED WITH MOONROOFS, A REINFORCEMENT BAR WAS INCORRECTLY ASSEMBLED SO THAT THE BAR MAY CONTACT THE GLASS IN THE MOONROOF. WHEN CLOSING A DOOR OR UPON SEVERE ROAD IMPACT, IT IS POSSIBLE THAT THE MOONROOF GLASS MAY SHATTER.

Nov 01, 2005 – CERTAIN SEDANS MAY HAVE BEEN BUILT WITH AN INCORRECTLY MANUFACTURED AUTOMATIC TRANSMISSION PARKING PAWL GUIDE PLATE.

Mar 18, 2004 – ON CERTAIN PASSENGER VEHICLES, THE PASSENGER AIR BAG TRIM COMPONENTS HAVE A POOR APERTURE EDGE.

Jan 08, 2004 – ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS, WITH THE FORWARD DRIVE GEAR SELECTED AND THE VEHICLE STATIONARY OR IN A FORWARD MOTION, THE GEARBOX COULD POTENTIALLY SELECT REVERSE GEAR, WITHOUT INDICATION.

Jun 02, 1999 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. FINE CRACKS WITHIN ONE OR MORE OF THE GEAR TEETH WITH IN THE GEAR TRAIN, INSIDE THE AUTOMATIC TRANSMISSION GEARBOX.