WORKHORSE W22 Recalls

Jul 27, 2010 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2011 WORKHORSE W22 AND R26 TRUCKS MANUFACTURED FROM FEBRUARY 5, 2007 THROUGH MAY 24, 2010. THE FUEL-FILL CAP ASSEMBLIES USED TO SEAL THE UNUSED SIDE OF THE DUAL-FILL GASOLINE FUEL TANK WERE PRODUCED WITH A HOSE MATERIAL THAT DID NOT MEET DESIGN SPECIFICATIONS. DURING NORMAL USAGE THE HOSE MATERIAL MAY DETERIORATE WHICH MAY RESULT IN FUEL LEAKS.

Apr 16, 2010 – WORKHORSE IS RECALLING CERTAIN MODEL YEAR 2010 W42, W62 AND MODEL YEAR 2011 W22 TRUCKS AND BUILT WITH A GENERAL MOTORS GASOLINE ENGINE AND EQUIPPED WITH REMY ALTERNATOR. A LOW RESISTANCE ELECTRICAL SHORT IN THE ALTERNATOR'S VOLTAGE REGULATOR MAY OCCUR.

Apr 03, 2009 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR MY 2001-2008 WORKHORSE W20, W21 AND W22 CHASSIS AND CERTAIN MODEL YEAR 2009 THROUGH 2011 MONACO RV ADMIRAL, ARISTA, MONARCH, AND RIPTIDE RECREATIONAL VEHICLES EQUIPPED WITH AXLES THAT INCLUDE BOSCH ZOPS OR ZOHT PIN SLIDE HYDRAULIC DISC BRAKES. WHEN COMBINED WITH OCCASIONAL OR SEASONAL VEHICLE OPERATION MAY EXPERIENCE CALIPERS STICKING IN THE APPLIED POSITION. THIS CAN RESULT IN ABNORMAL HEAT GENERATION AT THE WHEEL END CAUSING BRAKE DRAG. THE DRIVER WOULD NORMALLY HAVE WARNING OF THE BRAKE DRAG IF UNDETECTED BY THE DRIVER.

Jun 20, 2006 – ON CERTAIN MOTOR HOME AND TRUCK CHASSIS EQUIPPED WITH GENERAL MOTORS 8.1L V8 ENGINES, IMPROPER HARDENING DURING THE HEAT TREATMENT PROCESS CAN CAUSE THE FUEL RAIL PULSE DAMPER RETAINER CLIP TO FRACTURE, RESULTING IN INADEQUATE RETENTION OF THE DAMPER. IF THE DAMPER BECOMES LOOSE, FUEL COULD BE PUMPED BY THE FUEL PUMP INTO THE UNDER HOOD AREA.

May 02, 2006 – CERTAIN CHASSIS MAY HAVE BEEN EQUIPPED WITH INCORRECT STEERING INTERMEDIATE SHAFTS. THE SPLINE CAN STRIP WHILE THE STEERING WHEEL IS BEING TURNED.

Feb 18, 2004 – ON CERTAIN MOTORHOME CHASSIS EQUIPPED WITH BOSCH ZOPS, THE PADS CAN DRAG ON THE ROTOR SURFACE DUE TO THE PIN SLIDE.

Oct 04, 2001 – VEHICLE DESCRIPTION: MOTOR HOME AND COMMERCIAL CHASSIS. THE REAR AXLE U-BOLTS MAY NOT BE TIGHTENED CORRECTLY DUE TO RANDOM FAILURE OF PRODUCTION TOOLING IN THE SPECIFIED TIME SPAN.