WORKHORSE Recalls

Sep 25, 2008 – LA BOIT IS RECALLING 8 MY 2006-2007 FORD E-450, GMC 5500, AND WORKHORSE SPECIALTY VEHICLES EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 404, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES." THE THRESHOLD WARNING SYSTEM MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER IN A CERTAIN SPOT WITHIN THE DEFINED THRESHOLD AREA.

Sep 25, 2008 – LA BOIT IS RECALLING 8 MY 2006-2007 FORD E-450, GMC 5500, AND WORKHORSE SPECIALTY VEHICLES EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE LIFTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 403, "PLATFORM LIFT SYSTEMS FOR MOTOR VEHICLES." THE ANTI-STOW INTERLOCK MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER. THE PRESSURE SENSING SWITCH THAT DETECTS THE PRESENCE OF WEIGHT ON THE PLATFORM WAS NOT ADJUSTED TO THE NECESSARY SENSITIVITY LEVEL. THE LIFT COULD STOW EVEN THOUGH SOMEONE OR SOMETHING IS STILL ON THE LIFT.

Aug 28, 2008 – WORKHORSE IS RECALLING 5,606 MY 2006-2008 W42 COMMERCIAL CHASSIS AND W18 RECREATIONAL VEHICLE CHASSIS. THE CASTLE NUT THAT RETAINS THE STEERING DRAG LINK TO THE PITMAN ARM MAY HAVE BEEN IMPROPERLY TORQUED DURING ASSEMBLY. THE IMPROPER TORQUE MAY HAVE DAMAGED THE CASTLE NUT AND COMPROMISED THE INTEGRITY OF THE CONNECTION.

Jun 08, 2007 – CERTAIN COMMERCIAL CHASSIS BUILT WITH GASOLINE FUEL TANKS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 301, "FUEL SYSTEM INTEGRITY." FUEL SPILLAGE DURING A ROLLOVER TEST EXCEEDED 142G, WHICH DOES NOT COMPLY WITH THE STANDARD.

Jun 20, 2006 – ON CERTAIN MOTOR HOME AND TRUCK CHASSIS EQUIPPED WITH GENERAL MOTORS 8.1L V8 ENGINES, IMPROPER HARDENING DURING THE HEAT TREATMENT PROCESS CAN CAUSE THE FUEL RAIL PULSE DAMPER RETAINER CLIP TO FRACTURE, RESULTING IN INADEQUATE RETENTION OF THE DAMPER. IF THE DAMPER BECOMES LOOSE, FUEL COULD BE PUMPED BY THE FUEL PUMP INTO THE UNDER HOOD AREA.

May 02, 2006 – CERTAIN CHASSIS MAY HAVE BEEN EQUIPPED WITH INCORRECT STEERING INTERMEDIATE SHAFTS. THE SPLINE CAN STRIP WHILE THE STEERING WHEEL IS BEING TURNED.

Apr 22, 2004 – CERTAIN CHASSIS EQUIPPED WITH ACTIA CORPORATE INSTRUMENT CLUSTERS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 101 "CONTROLS AND DISPLAYS" AND 105 "HYDRAULIC AND ELECTRIC BRAKE SYSTEMS." IF THE BRAKE FAIL INPUT FALLS BELOW A VOLTAGE OF 1.5V, THE BRAKE FAILURE LAMP AND ALARM WILL BE ACTIVATED. ALSO ACTIVATION OF THE ABS TELL TALE WHEN THE ABS IS NOT PROPERLY FUNCTIONING DOES NOT ALWAYS OCCUR.

Feb 18, 2004 – ON CERTAIN MOTORHOME CHASSIS EQUIPPED WITH BOSCH ZOPS, THE PADS CAN DRAG ON THE ROTOR SURFACE DUE TO THE PIN SLIDE.

Oct 04, 2001 – VEHICLE DESCRIPTION: MOTOR HOME AND COMMERCIAL CHASSIS. THE REAR AXLE U-BOLTS MAY NOT BE TIGHTENED CORRECTLY DUE TO RANDOM FAILURE OF PRODUCTION TOOLING IN THE SPECIFIED TIME SPAN.

May 15, 2000 – VEHICLE DESCRIPTION: MOTOR HOME AND COMMERCIAL CHASSIS EQUIPPED WITH JB8 POWER HYDRAULIC BRAKE OPTION. AN INCORRECT ANTI-LOCK BRAKE CONTROL MODULE WAS INSTALLED ON THESE VEHICLES. THE INCORRECT MODULE DOES NOT REDUCE BRAKE POWER TO THE REAR AXLE BRAKES.