AUDI Complaints

The contact owns a 2023 Audi SQ8. While refueling the vehicle, the contact became aware that the electric actuator had fractured. There were no warning lights illuminated. The vehicle was towed to the local dealer, who confirmed that there was no emergency fuel door release. The vehicle was repaired. The manufacturer was contacted and provided information about the red door release. The failure mileage was approximately 3,700. The VIN was not available.

The car is displaying "Right front marker light defective". This lessens the visibility when turning. This problem is a VIN specific recall of the 2017 Q7 and my VIN is not included, even though I am experiencing the exact same problem as the recall on the other VINs from the same year.

As I began to move the car, the vehicle suddenly accelerated on its own. I attempted to brake before reaching the stop sign, but the car continued to gain speed. I estimate the vehicle reached approximately 60 mph. Within seconds, I collided with two vehicles and then a palm tree, sustaining a frontal impact. The entire incident occurred within approximately two to three seconds, during which the vehicle accelerated rapidly. Despite the collision, the airbags did not deploy, the seat belt did not lock, and neither the brake system warning nor the automatic braking system activated.

Car has a burnt cylinder from excessive oil consumption due to poor piston ring design. These engines are prone to failure to do carbon buildup on the cylinders which leads to poor PCV performance to exacerbate the problem. Audi dealership has confirmed my cylinder 3 has a burnt valve and requires a new engine.

Following a rear collision repair at an authorized dealer collision center, multiple ADAS safety systems were not properly calibrated despite insurance payment and shop representations that repairs were complete. WHAT FAILED: Lane Change Assist, Peripheral Camera System, Side Assist, 360-Degree Camera, Front Camera, and Adaptive Cruise Control were either not calibrated or calibrated in timeframes physically incompatible with manufacturer specifications. SAFETY RISK: Driver relies on blind spot monitoring and lane change alerts that may be non-functional or inaccurate. Without proper calibration, these systems may fail to detect adjacent vehicles, provide false alerts, or create blind spots in camera coverage, increasing collision risk during lane changes and merging. DEALER CONFIRMATION: Yes. Shop manager provided diagnostic logs as proof of calibration. Analysis shows 360-degree camera calibration executed in 18 seconds versus 40-60 minute industry standard, and zero calibration events logged for Lane Change Assist and Peripheral Camera systems explicitly claimed as completed. INSURANCE INSPECTION: Insurance company explicitly DENIED Lane Change Assist and Peripheral Camera calibrations on estimate. Shop admitted in writing these items were declined and blamed insurance for non-payment. No OEM calibration logs produced despite multiple written requests. WARNING SYMPTOMS: Systems may appear normal on diagnostic scan with no active fault codes, but this does not prove calibration was performed to OEM tolerances. Physical calibration requires target board positioning, laser alignment, and environmental verification that cannot be completed in documented timeframes. PATTERN CONCERN: This may represent a systemic issue where insurers deny ADAS calibrations, shops skip calibrations due to non-payment, vehicles are released as complete, and consumers unknowingly operate vehicles with compromised safety systems. Vehicle and documentation available for inspection.

My 2019 Audi A6 sedan displays warnings for the Start/Stop system malfunction indicated in Audi's document: "Emissions Service Action Code: 27BQ" [XXX] I'm still waiting to hear if this has been elevated to Recall status. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2021 Audi SQ7. The contact received notification of NHTSA Campaign Number: 25V201000 (Electrical System). The contact scheduled an appointment with a local dealer; however, the dealer advised the contact that the USB ports needed to be repaired to complete the recall repair. The contact had never used the ports and was unaware of the failure prior to the recall notification. The vehicle was not repaired. The manufacturer was informed of the failure and referred the contact back to the dealer for assistance. The failure mileage was approximately 46,000.

Odometer Fraud. The contact purchased a 2012 Audi A4. It was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of the purchase, the mileage was 90,512 and at the time of the registration, it was discovered that the mileage was 175,000.

I am writing to file a formal safety defect complaint regarding the EA839 3.0T turbocharged V6 engine installed in various Audi models, including but not limited to the B9/B9.5 S4 and S5, C8 A6 and A7, and 4M/4M.5 Q7 and Q8 (model years approximately 2017 onward). This engine has a well-documented issue with piston skirt wear and failure, which I believe constitutes a significant safety hazard due to the potential for sudden engine failure and loss of vehicle power while driving. As an owner of a 2019 Audi S5, I have experienced symptoms related to this defect, and I urge the NHTSA to investigate this matter to prevent potential accidents, injuries, or fatalities.

Dash Delamination: The leather dashboard is experiencing severe delamination and pulling away from the substrate, specifically in the area surrounding the passenger-side airbag. I believe this condition poses two significant safety risks: Airbag Interference: The detached and warped material may obstruct, delay, or alter the deployment path of the passenger-side airbag during a collision. Visibility and Distraction: This is a material defect, not wear and tear, and it poses a potential safety concern due to the reflection/glare on the windshield, as well as the distraction it causes while driving. Audi has acknowledged this "process weakness" and issued a Limited Warranty Extension (AWA-23-11) for 2019-2020 Q8 models. Despite this, my request for a safety-related repair was denied due to over 80K. The issue should be considered under mileage. I am requesting that the NHTSA investigate this defect to determine if it constitutes a safety non-compliance with FMVSS No. 208, as the structural integrity of the dashboard is vital for proper airbag performance. Thank you for your assistance in ensuring the safety of this vehicle.