2006 BMW X5 Complaints

TL* THE CONTACT OWNS A 2006 BMW X5. THE CONTACT STATED THAT WHILE THE VEHICLE WAS PARKED, IT RAINED AND WATER ENTERED THROUGH THE SUNROOF AND CREATED MOISTURE IN THE VEHICLE. THE AIR BAG WARNING LIGHT THEN ILLUMINATED. THE CONTACT BELIEVED THAT THE AIR BAG WARNING LIGHT ILLUMINATING WAS RELATED TO THE WATER ENTERING THE VEHICLE. THE VEHICLE WAS NOT TAKEN TO A DEALER OR MECHANIC INDEPENDENT. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 100,000.

1) THE AIR BAG LIGHT DOES NOT GO OFF. IT STAYS ON. AIR BAGS ENGAGE BUT LIGHT IS JUST AS BRIGHT AS CAN BE. 2) IGNITION SWITCH SECURITY LATCH DOES NOT RELEASE. HAVE TO SMACK STEERING WHEEL AFTER TURNING OFF ALARM TO PLACE KEY INTO IGNITION SLOT.

THE FRONT PASSENGER AIR BAG HAS GONE OUT FOR THIRD TIME IN THE NINE YEARS THAT I HAVE OWNED THIS VEHICLE.

I HAVE BEEN INFORMED WHILE CAR SHOPPING THAT MY 2006 BMW X5 HAS A RECALL FOR THE SEAT BELTS BUT I HAVE NEVER BEEN NOTIFIED OF THAT RECALL. I AM DISAPPOINT THAT THE MANUFACTURER SEEM TO BE TAKING THIS RECALL LIGHTLY BUT LIVES ARE AT RISK. WHAT IS THE PLAN TO RESOLVE THIS ISSUE?

MY VEHICLE / VIN SHOULD BE INCLUDED IN THE RECALL CAMPAIGN NO. 13V-564: "FRONT PASSENGER AIR BAG SEAT OCCUPANCY SENSOR MAT." MY VEHICLE IS PART OF THE MODEL YEAR 2006 X5 SAV'S THAT HAS THE DEFECT. BUT MY VIN IS NOT BEING RECOGNIZED IN THE RECALL AND IS EXPERIENCING THE EXACT DEFECT. THE AIR BAG WARNING LAMP ON THE INSTRUMENT CLUSTER AND THE FRONT "PASSENGER AIR BAG OFF" LAMP IN THE OVERHEAD CONSOLE ARE ILLUMINATED AT THE SAME TIME. THE SENSOR HAS BECOME DAMAGED OVER TIME DUE TO THE FREQUENCY OF FRONT PASSENGER SEAT USAGE. BMW AG HAS DECIDED THAT THE DEFECT, WHICH RELATES TO MOTOR VEHICLE SAFETY, EXISTS IN THE MODEL YEAR 2006 X5'S. WHEN I CONTACTED BMW USA THEY TOLD ME MY VEHICLE WAS PART OF THE RECALL BUT THEY HAD THE LAST DIGIT IN MY VIN AS A "2" INSTEAD OF A "3". THE REST OF THE VIN WAS THE SAME. THE VIN WITH THE LAST DIGIT AS A "2" WAS THE EXACT MODEL AS MY VEHICLE (YEAR, COLOR, INSIDE AND OUT, AND EQUIPMENT). BUT FOR SOME REASON MY VIN IS MISSING FROM THE RECALL. WHY IS MY VIN NOT PART OF THE RECALL IF IT IS THE SAME VEHICLE (YEAR AND MODEL) AS OTHERS THAT ARE PART OF THE RECALL? HOW DO I HAVE MY VEHICLE / VIN ADDED TO THE RECALL CAMPAIGN NO. 13V-564? *TR

2006 X5 VIN [XXX] WHILE IN MOTION ON A CITY STREET AND HWY! 1. BRAKE BOOSTER / VACUUM LINE FAILURE SAME AS RECALLED 2007-2010 ISSUE. WHY IS MY 2006 X5 BMW NOT COVERED WHEN THERE IS CLEARLY A SYSTEMIC FAILURE OF THIS SAME SYSTEM? I SEEK IMMEDIATE RELIEF AND DEMAND UPON YOU A RECALL FOR MY SPECIFIC BMW NOW TODAY. [XXX] CALL ME! 2. ALTERNATOR FAILURE X5 ACTED POSSESSED WITH ALL LIGHTS GOING ON AND OFF BEFORE SHUTTING THE CAR DOWN ON A FREEWAY WHILE AT MAX LEGAL SPEED. ALTERNATOR IS PLACED LOW ON THE LEFT SIDE WHERE OIL LEAKS INTO IT CAUSING A FAILURE MODE. THE SAME OIL LEAKS CAUSE OTHER RUBBER COMPONENTS TO SWELL UP CRACK AND FAIL SUCH AS BOOTS AND RUBBER BUSHINGS ON ARMS. WHERE IS THE RECALL?? 2006 WHERE IS IT?? 3. BRAKE LIGHT SYSTEM FAILURE BACK R/H AND CHANGING LIGHT BULBS DIDN'T BRING IT TO WORKING CONDITION. BMW USED A SCREW DRIVER TO MAKE IT WORK AGAIN AFTER THE AIRBAG AND ALTERNATOR REPAIR THEY DID..I PAID FOR THE ALTERNATOR BUT IT SHOULD HAVE BEEN A RECALL ITEM! NOW MY BRAKE LIGHTS DON'T WORK BACK R/H SIDE. 5. 1 HEAD LIGHT OUT 6. ENGINE LEAKS OIL ON THE SIDE ONTO MY X5 RUBBER COMPONENTS AND I ALREADY HAD TO PAY FOR A NEW BOOT AND ARM! OTHER RUBBER ITEMS ARE ALL BAD AND GETTING WORSE! WHERE IS THE RECALL? WHY ARE THESE SAFETY ITEMS NOT BEING RECALLED BY YOUR GOVERNMENTAL ORGANIZATION? INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR

WHILE DRIVING ON INTERSTATE IN HIGH SPEED LANE ENGINE SUDDENLY LOST POWER CREATING DANGER OF REAR END COLLISION. IN MOVING TO BREAK DOWN LANE ENGINE CONTINUED TO RUN BUT WOULD NOT PROPEL THE VEHICLE OVER 5 MPH. THIS PROBLEM HAD OCCURRED TWO WEEKS PREVIOUSLY WHEN THE VEHICLE WAS TOWED TO BMW DEALER FOR SERVICE. AT THAT TIME THE VEHICLE WAS ELECTRONICALLY DIAGNOSED AND NO FAULTS WERE FOUND OR REPAIRS MADE.THE VEHICLE WAS AGAIN TOWED TO THE BMW DEALER AND NO ELECTRONIC FAULTS WERE FOUND. THIS TIME A MECHANICAL DIAGNOSIS WAS PERFORMED AND FUEL PRESSURE WAS FOUND TO BE 12 PSI RATHER THAT THE 55 PSI SPECIFIED. SUBSEQUENTLY THE CONTACTS IN THE FUEL PUMP RELAY WERE FOUND TO BE BURNED, THE FUEL FILTER AND PRESSURE REGULATOR WERE FOUND TO CONTAIN METAL SHARDS, THE FUEL PUMP SHOWED NO EXTERNAL SIGNS OF DAMAGE. ALL ITEMS WERE REPLACED AT WHICH TIME FUEL PRESSURE RETURNED TO 55 PSI AND THE VEHICLE WAS ABLE TO BE DRIVEN NORMALLY. THE CONCLUSION IS THAT THE FUEL PUMP CAN FAIL INTERNALLY WHICH CANNOT BE DETECTED BY ELECTRONIC DIAGNOSIS AND RETURNING A CAR TO THE ROAD WITHOUT PERFORMING THE MECHANICAL DIAGNOSES SPECIFIED IN THE FACTORY SERVICE LITERATURE IS A DANGEROUS AND NEGLIGENT PRACTICE BY THIS PARTICULAR BMW DEALER'S SERVICE DEPARTMENT AND MAY INDICATE AN INHERENT FLAW IN THE MANUFACTURE OF THE FUEL PUMP. PARTS REPLACED: 61 36 8 373 700 RELAY 16 12 6 754 016 FUEL FILTER PRESSURE REGULATOR 16 11 6 768 357 FUEL PUMP

WHEN PULLING INTO MY DRIVEWAY I NOTICED A BURNING SENSATION ON THE LEFT SIDE OF MY BUTT BURNING MY COAT. I STOPPED THE BMW AND JUMPED OUT . WITH THE COURTESY LIGHT ON I COULD SEE THAT THE LEATHER SEAT HAD A BURN HOLE WHERE I COULD SEE THE ELECTRICITY LIKE MINI LIGHTENING. WHEN I TURNED OFF THE SEAT HEATER AND THE BURNING STOPPED. HAD I BEEN ON THE HIGHWAY, SERIOUS INJURY COULD HAD OCCURRED. BMW REFERRED ME TO HAVE THE PROBLEM EVALUATED AND DETERMINED THAT THEY WERE NOT RESPONSIBLE AND REPAIR WOULD COST ABOUT $1400. BMW IS AWARE OF THEIR SEAT HEATER PROBLEM AS SEE BY NUMEROUS BLOGS ONLINE BUT REFUSES TO RECALL THE AFFECTED VEHICLES. I HAVE NOT YET CONTACT MY INSURANCE COMPANY.

TL* THE CONTACT OWNS A 2006 BMW X5. WHILE DRIVING 40 MPH, THE CONTACT EXPERIENCED A FLAT TIRE. UPON DRIVING TO THE SIDE OF THE ROAD TO CHECK THE TIRE, THE PASSENGER SIDE CURTAIN AIR BAG INADVERTENTLY DEPLOYED WITHOUT WARNING. THE VEHICLE WAS NOT TOWED AND WAS ABLE TO BE DRIVEN TO AN INDEPENDENT MECHANIC, BUT WAS UNABLE TO DIAGNOSE THE FAILURE. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 80,000.

FIRE HAZARD, POTENTIAL ENGINE SHUTTING OF UNEXPECTEDLY: BATTERY CABLE AT CHARGE POINT UNDER HOOD MELTED AND CHARRED . DISCOVERY PRECEDED BY NOTICEABLE BURNING SMELL IDLING IN TRAFFIC. PLASTIC TERMINAL MOUNTING BASE MELTED AND CHARRED, TERMINAL DISCONNECTED FROM BASE, PLASTIC INSULATION AROUND CABLE TERMINAL CRIMP CHARRED AND MISSING. PARTS AFFECTED: 12 42 7 531 720 MAIN POWER CABLE CHARGE POINT TO ALTERNATOR; 12 52 1 439 674 BASE B+; 61 13 8 371 016 COVER BASE B+. EXAMINATION OF THE CRIMPED TERMINAL CONNECTING THE CABLE TO THE CHARGE POINT BOLT SHOWS THE CABLE NOT FULLY INSERTED IN THE TERMINAL BEFORE CRIMPING AND THE TERMINAL NOT COMPLETELY SOLDERED TO THE CABLE RESULTING IN A HIGH ELECTRICAL RESISTANCE AT THE TERMINAL AND EXCESSIVE HEATING WHEN THE ELECTRICAL SYSTEM UNDER LOAD WHEN THE ENGINE IS RUNNING. POSSIBLE CONSEQUENCES OF OVERHEATING OF THE CABLE INCLUDE THE POSSIBILITY OF FIRE IN THE ENGINE COMPARTMENT, FAILURE OF THE ELECTRICAL SYSTEM AND UNEXPECTED SHUT DOWN OF THE ENGINE AND ALL POWER ASSISTED SYSTEMS WHILE DRIVING.