2021 CAN-AM RYKER Complaints

Tire wobble and stutter on left hand turns. Throws VSS fault code C600c and C60063

ABS intermittingly engaging when taking left corners. I have almost crashed twice now as the brakes are unexpectedly locking up while taking a mild curve at 35 mph. I have had the SAS reset once already and I am still having this problem.

When making left hand turns over 25MPH, the right tire and rear brake lock in causing the front to wobble and the rear to skid and jerk. There is no issue with right hand turns

i was told that my ryker was safe to drive in to have the recall work completed and then my vehichle quit working because of the damage to the vehichle. i dont understand why the burdan to have my vehichle repaired is on me. I was told that thier roadside assistance would only cover a small percentage of the cost to have the vehichle towed and i would owe $745 just to get my vehichle to the dealer. If there is a known risk for the vehichle part to malfunction and lose power and not be able to start, then how is this considered safe to drive 100+ miles to the nearest dealer? The vehichle should have been immediately hauled in at the manufacturers expense to have the work done instead of leaving me stranded now without a means of transortation to get to work.

When making left hand turns under load, right wheel starts to slip, tuck, traction control kicks on, rear wheel starts modulating power with breaking, and then the right front wheel gains traction. this is a cycle and occurs every time I make a left and turn. This process occurs very quickly. Close to 1 time per second while making the left hand turn. It destabilizes the machine and causes partial loss of steering control. These symptoms are not replicated on the left front wheel when making right hand turns. Air pressure is correct on all tires. No loos suspension components noted. As mentioned, this occurs during every sweeping left hand turn.

I have a 2021 Can Am Ryker Rally. At approximately 3,000 miles I noted that when in a left turn the rear tire beings to wobble back and forth. During this time the throttle becomes unresponsive and reduces power. Example, I can be in a gradual left turn going 40 PMH and when the wobble begins, it will drop the speed to around 25 MPH. When I come out of the turn, power returns and the bike return to normal. During this transition, you have to be ready for this as it can be very unexpected as you are fighting the handlebars to go left. During each event I don’t get a fault code. I’ve been living with it as I figured that was just how the Ryker was. However, I had someone following me recently and they witnessed it and commented that something was not normal. So, I called dealers and Can Am. No one had heard of what I was describing. I began to look into it and noted that it might be a yaw rate sensor problem. Took it to a dealer where they said there was no fault code so they couldn’t do anything. I suggested resetting the Yaw Rate Sensor, which they did. About 10 miles from the dealership on I 81 in the passing lane, going uphill with a semi behind me and 2 to the right, the bike went into Limp Home Mode. The speed roller back unexpectedly. With a lot of arm waving and kind truck drivers, they let me in so I could get off at the exit. Drove it back to the dealer where they noted a Steering Angle Sensor (SAS) fault. Ride back home was uneventful until I was exiting I81 South and getting on I 64 East which is a gradual left turn. I was 2/3 into the turn with no issues so I was happy that it looked like it was fixed. Then the back brake locked up for a split second which startled me and to keep it into the turn I had to correct with the handlebars. Quite frankly, I almost lost control of the bike. My Ryker is parked and will not move again till I get an appropriate repair from Can Am as it is not safe.

I was riding my Ryker 900 as I approach the traffic light the handlebar started to move forward, I pulled into a gas station to lock it in place but it wouldn't lock, in order to drive home I had to grip the handlebars tight pull towards my body to keep it steady.

When you riding the bike for a certain amount of time, it cuts of or when you cut it off it don't start back up. It's very dangerous for you to be riding and the bike just shuts down. Then you have to.let the bike sit for an hour until the fuel pump cools off then it will start up again and drive normal. But the same thing happens again this my 3rd time this has happened to me.

BRP's Vehicle Stability System (VSS) engages randomly on left turns, cutting engine power, applying braking, and temporary stalling around curves at normal driving speeds. This situation is a serious driving hazard as may suddenly jerk erratically, causing temporary loss of control of vehicile. This has happened on several occassions, and is a known problem to BRP. Ryker will lose power during a turn, causing vehicles behind to brake to avoid a collision, the bike will jerk and shake erratically, as brakes are being applied, then lunges forward when the VSS system disengages and normal power is restored. I almost got rear-ended by a large truck. This Ryker is NOT safe to drive. Has been taking to the dealer five times to try and fix the problem but so far it persists. Dealer clamis that Can-Am (BRP) has not been very helpful in resovling problem. This is a design or manufacturing flaw that needs to be fixed in the VSS system.

I bought the bike new and it is all stock, no addtl electrical additions. I was riding the bike had gone approx 35 miles the 1st & 2nd time and l was on a highway all of a sudden my bike lost power. It dropped speed from 65mph to under 40mph & my dash started to read VSS FAULT LIMP HOME..... I was almost hit multiple times by traffic coming up on me at higher speeds & bcz the bike has no emergency flashers l was almost struck. There were no service roads on HWY 380 East from Decatur, TX back to Denton, TX. So l was forced to ride on a hwy at 35-40mph w no hazards. I took it in to the dealership in Denton,TX at Freedom Powersports 2 days later the tech tells me it was maybe a brake fuse code. The bike was less than a year & less than 1500 miles on it. The 1st time it threw a VSS FAULT CODE l was on l-35 S heading to Dallas ,TX. l was about 20 miles out when the bike did the same thing it lost power as l was going about 65-67 mph. The bike was less than 3mo under 500 miles. The bike again quickly lost power & dropped speed fast down to 35mph & l saw the VSS LIMP HOME code come on my dash screen. I had to quickly change lanes & exit the interstate without being hit from behind bcz again l had no emergency flashers. I was told this time by Freedom Powersports of Lewisville,TX that it must have been a loose battery cable bcz the computer couldn't find any specific reason. It puts my life in grave danger & makes the bike un-reliable.