CAN-AM Complaints

The contact owns a 2015 Can-Am Spyder F3. The contact received notification of NHTSA Campaign Number: 22V352000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

When making a left hand turn, at any speed over 35mph, the rear of the bike wobbles, and the front tires, at least one if not both begin to automatically brake. I’ve looked into it, it appears to be related to a SAS/VSS issue with the suspension and stability having too much play. I’ve researched and found that so many people reported it to NHTSA that you have an article, 137209. They will not fix this issue under recall because they claim it’s not an issue being reported enough. I can’t afford to have this issue that came from factory fixed because they don’t want to fix their issue. This is a major concern, at highway speed on an overpass I experience this issue daily and I’m afraid it’s going to cause an accident, because when it occurs the bike automatically slows 10-15 mph without me hitting the brakes, and I am worried I’m going to get hit by someone because of a defect in their product.

When making a left hand turn, at any speed over 35mph, the rear of the bike wobbles, and the front tires, at least one if not both begin to automatically brake. I’ve looked into it, it appears to be related to a SAS/VSS issue with the suspension and stability having too much play. I’ve researched and found that so many people reported it to NHTSA that you have an article, 137209. They will not fix this issue under recall because they claim it’s not an issue being reported enough. I can’t afford to have this issue that came from factory fixed because they don’t want to fix their issue. This is a major concern, at highway speed on an overpass I experience this issue daily and I’m afraid it’s going to cause an accident, because when it occurs the bike automatically slows 10-15 mph without me hitting the brakes, and I am worried I’m going to get hit by someone because of a defect in their product.

I had a VSS Fault and engine power cut off while coming in a left turn. Rear tire became wobbly and almost threw me off. Bike went to limp mode and slowed down. Had engine codes C006C and C0063 which are common problems with the steering and engine going to limp mode

The contact owns a 2015 Can-Am Spyder F3-S. The contact received notification of NHTSA Campaign Number: 22V352000 (Power Train) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2017 Can-Am Spyder RT Motorcycle. The contact received notification of NHTSA Campaign Number: 22V352000 (Power Train) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

I purchased my Ryker in June of 2022. Since my purchase I have been dealing with a death wobble in the front during left turns, a serious wobble in the rear during left turns, and continuous vss fault/Limp home mode failure. I reported the issue to the dealer and they attempted to correct the issue, but it has continued to fail. I contacted BRP the parent company, and they refused to respond. There have been 2 safety recalls and I am no longer feeling safe to ride the vehicle.

i was told that my ryker was safe to drive in to have the recall work completed and then my vehichle quit working because of the damage to the vehichle. i dont understand why the burdan to have my vehichle repaired is on me. I was told that thier roadside assistance would only cover a small percentage of the cost to have the vehichle towed and i would owe $745 just to get my vehichle to the dealer. If there is a known risk for the vehichle part to malfunction and lose power and not be able to start, then how is this considered safe to drive 100+ miles to the nearest dealer? The vehichle should have been immediately hauled in at the manufacturers expense to have the work done instead of leaving me stranded now without a means of transortation to get to work.

Multiple failures of electronic parking brake release in which pressing release button results in the parking brake light flashing repeatedly (an error indicator) and parking brake does not release. Sometimes works again after turning cycle off and back on but this is second time that has not worked and I have had to crawl under with a wrench and manually remove the cable from the holder to drive to dealer. Once released that way, the button worked again for the dealer and they insisted they couldn’t replicate, wouldn’t replace switch or servo motor despite error fault codes. Suggested slightly low battery voltage might be to blame but I use a trickle charger. Replaced battery anyway. Happened again less than 2 weeks later, in a parking lot away from home. Dangerous because you cannot move cycle without undoing the parking brake cable and then you don’t have a parking brake, which it needs because it is an automatic transmission and will roll even if in gear if the engine isn’t running. I have seen numerous reports of this problem on Can-Am Spyder message boards. Either switch is faulty or servo motor is faulty. I can’t MOVE the bike to get it home or to the dealer without taking action that temporarily fixes the problem but they won’t fix it unless it is doing it for them. Despite numerous reports of this problem. I feel there needs to be a recall of 2018 and up Spyder RT Limited models to address this issue across all owners.

The contact owns a 2015 Can-Am Spyder F3. The contact received notification of NHTSA Campaign Number: 22V352000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. The VIN was not available.