2017 CHEVROLET CRUZE Complaints

Car spontaneously stops accelerating. Sometimes a restart is needed. It jerks as you're trying to gain acceleration. Sometimes it stalls after non acceleration. Safety is compromised due to traffic behind me going speed limit or worse. First appeared 2 months ago. Mechanic could not detect anything on diagnostics. Then we took it to the Chevy dealer where purchased and after 5 days could not diagnose. They took it out 3x but could not duplicate symptoms. No lights flash, no warnings. I'm at a loss, I'm a senior citizen who needs her vehicle. I no longer feel safe driving it. Please advise.

The seat will not move forward. Being that it is an electric motor, it has become increasingly difficult to reach the pedals, especially the brakes.

The Service Stabilitrak light came on at the same time as the check engine light. When this happened the first time I had it checked, it gave the Code P1101. I payed to having the Massive air flow sensor fix, than a few days after having massive air flow sensor replaced.The Service Stabilitrak and engine light came back on. The engine started to misfire I took it back to the car dealer shop and I was told that it was a Cylinder in the engine. The dealers shop at first couldn't tell me why it was doing this. After the car dealer ship opened up the engine they said that engine needed to be replacement.

The contact owns a 2017 Chevrolet Cruze. The contact stated while driving at an undisclosed speed, the vehicle hesitated and was slow to accelerate. The stabili-trak control warning light was illuminated. The contact stated that the vehicle was slow to respond while driving uphill. There was an abnormal popping sound coming from the vehicle. The vehicle was taken to the local dealer, where it was diagnosed and determined that the fuel injector needed to be replaced. The vehicle was repaired, but the failure persisted. The vehicle was taken back to the local dealer, where it was diagnosed that the coil pack, turbo boost, spark plugs, an oil change, ABS, brake booster, and air flow sensor needed to be replaced. The vehicle was repaired, but the failure recurred. The vehicle was taken to an independent mechanic, who informed the contact that the failure was due to the low turbo boost. The manufacturer was not contacted. The failure mileage was approximately 138,000.

The engine failed and needs replacement due to low compression and constant misfire on cylinder #1, according to the dealership. I sold the vehicle because of the repair costs that were required. The vehicle’s mileage was 47,664 at time of inspection. A Chevrolet dealer confirmed the issue, and GM acknowledged that the issue occurred. The check engine light turned on a few weeks before the failure was diagnosed, and the light began flashing about a week before it was diagnosed. The Service Stabilitrak light also turned on at the same time as the check engine light.

The contact owns a 2017 Chevrolet Cruze. The contact stated while driving 25 MPH, the check engine warning light illuminated. The vehicle was taken to an independent mechanic and the spark plugs and ignition coils were replaced; however, the failure recurred. The vehicle was diagnosed, and the contact was informed that there was a misfire in cylinder #1. The vehicle was taken to another independent mechanic and the contact was informed that the piston was fractured, and the engine block needed to be replaced. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 65,000.

The contact owns a 2017 Chevrolet Cruze. The contact stated that while driving approximately 40-45 MPH, the check engine warning light illuminated and the vehicle decelerated to 30-35 MPH. Additionally, the vehicle made abnormal rattling sounds and failed to exceed 30-35 MPH. The vehicle was taken to the dealer, where it was diagnosed that the knock sensors needed to be replaced. The vehicle was repaired; however, the failure recurred two months later. The vehicle was taken back to the dealer, where the knock sensors and the engine were replaced; however, the failure persisted. The vehicle was taken to a second dealer, Zimbrick Chevrolet Service (1877 W Main St #200, Sun Prairie, WI 53590), where the knock sensors and the knock sensors terminal were replaced; however, the failure recurred. The vehicle was taken back to the dealer, where it was diagnosed that the Engine Control Module (ECM) needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that they could not assist because the vehicle was out of warranty. The failure mileage was approximately 62,000.

Based off my mechanic's assessment and that of a Chevrolet dealership, one of the cylinders in my Chevy Cruze is no longer firing. The dealership believes at least one of the pistons needs to be replaced. The car is available for inspection. The car is unreliable to drive, as I drove up a freeway incline it slowed to a dangerously low speed for freeway driving. The dealership has confirmed they believe it is an issue with the piston but will not confirm without charging $2800 to dismantle the car and are not able to guarantee they will be able to fix the issue. Diagnostics were run on the car at Putnam Chevrolet in Burlingame CA. There were no warning lamps or messages prior to a major issue with the cars functionality. The issue first appeared June 15, 2023 without any warning. The engine light came on and the car was not functioning properly, plus a notification to "service Stabilitrek". I have found mention of the same problem on consumer forums. Cracked pistons are a KNOWN issue on this make and model but there are no recalls and the car is just outside of the warranty.

Vehicle had a cracked piston. Now the vehicle is very sluggish while accelerating from a stop. Burns a tremendous amount of fuel. Vehicle is also stalling frequently. It’s been to Chevrolet twice and a mom and pop shop and nobody can figure out what the problem is.

The contact owns a 2017 Chevrolet Cruze. The contact stated that the vehicle was designed with the Auto START/STOP feature; however, while at a complete stop, the engine turned off but failed to restart. The contact shifted into park (P) and restarted the vehicle. The contact stated that the failure occurred intermittently. Additionally, the contact stated that while driving between 35-65 MPH and depressing the accelerator pedal, the vehicle jolted and hesitated to respond. The contact stated that the failure occurred intermittently. The contact also stated that the check engine warning light illuminated intermittently. The vehicle was taken to an independent mechanic, where it was diagnosed but no issues were found. The dealer and the manufacturer were not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 42,000.