CHEVROLET Complaints

View complaints related to CHEVROLET. The complaints found here are submitted by actual consumers with first hand experience. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.

  • 2016 CHEVROLET SILVERADO 1500
    - Flushing, MI

    I have had so much issues as has thousands upon thousands of other people related to the arm on my truck nothing but issues regarding it

    Source: NHTSA WEB SITE
  • 2022 CHEVROLET TAHOE
    - Cape Coral, FL

    The ONSTAR system only lasted 5 months from purchase of the vehicle. I was told that GM had none in stock, so the dealership placed a order to have a new one installed under warranty. I was to receive a call when it became available, but received no calls. My warranty expired in August and the dealership wants me to pay $1000 to get this replaced, when it was a warranted part that I waited for, for 2 1/2 years. My auto is not safe now as many components do not work, and I drive 45 min to work and then back in Montana. If I break down on the deserted highway there will be no way to get help! Please help!

    Source: NHTSA WEB SITE
  • 2018 CHEVROLET TRAVERSE
    - Denison, TX

    Transmission issues since 85k miles, park to shift sensor error since owned, rear ideoendent suspension bolts were stripped needed alignment. Car has not performed since ownership.

    Source: NHTSA WEB SITE
  • 2017 CHEVROLET SILVERADO 1500
    - Springfield, OH

    Nothing yet. Between doing research and general observation the DOD/AFM is a known issue for these motors. The engine will randomly loose a valve and cause the engine to shut down causing for a major Saftey concern if traveling or towing

    Source: NHTSA WEB SITE
  • 2004 CHEVROLET MONTE CARLO
    - Antioch, TN

    I took my car into Freeland Chevrolet for the recall my car was running great,when i picked it up it was idling rough and smoking on my way home it was stalling out at every stop causing me to loose control of power steering and braking creating a safty haszard called them the next day and told them about it which they already knew because the manager was outside when i started it up. They said it was thowing 11codes when i brought it in saying that was the problem,which i could not have drove it their in that condition and never would.got in touch with corp office. In the mean time I had it towed back to them on DEC1,,,.Because its undrivable. Then on Dec11 got a call from corporate say i had to pay 253.00 for a Diagnostic also they told them it was throwing 21 codes when i brought it in.whats the Truth? they endangerd many lives by letting me drive that car off the lot.That tells me they have no regard for the safety of the public. my car is still there

    Source: NHTSA WEB SITE
  • 2016 CHEVROLET MALIBU
    - DuBois,, IL

    My 2016 Malibu has a severe EBCM-related safety defect causing all four brakes to drag and overheat (reaching 240°F), leading to unstable handling. This condition mirrors the 2016 Malibu EBCM recall (GM Recall 39440). I sought help from GM. A GM-certified dealer-Monken in Centralia, IL performed a “diagnostic scan” which documented the core hydraulic failure: a constant, uncommanded 6.839 psi residual brake line pressure when the pedal was released. (A healthy system should be near 0 psi) This 6.839 psi is actively forcing the brakes to drag. The dealer ignored their own scientific data and submitted a fraudulent diagnosis of ("rust buildup") to GM, which GM used to deny the claim based on mileage. “Rust buildup” doesn’t create hydraulic pressure. GM is aware of this specific, documented, quantifiable safety defect (the 6.839 psi pressure) and is refusing to investigate it further. I stressed to GM that the vehicle wasn’t safe to drive and that I have a small child who has to ride in the car with me. GM dismissed my concerns by stating the dealership won’t release my car unless its safe to drive. I then had to drive the car 22 miles back home with all 4 brakes dragging. I requested the full diagnostic scan report (that the mechanic confirmed he could provide me with when I dropped my car off there) numerous times and never did I get one. I informed them that I would be filing a complaint hadn’t I received it by a certain time. The new kid in service then did send me screenshots of a generic OBDII scanner where I saw the 6.839 psi. I knew what the issue was prior to taking my car to Monken. I had an independent scan done prior. I only took the car there to comply with GM’s protocol to be eligible for assistance. I am requesting NHTSA investigate GM for failure to address a documented hydraulic control safety defect that causes brake dragging and overheating, which is non-compliant with safety standards. I can give further info Please call me for further details.

    Source: NHTSA WEB SITE
  • 2024 CHEVROLET SILVERADO 1500
    - Bakersfield, CA

    Transmission pauses from 1st and 2nd gear. Causing to have no acceleration from a stop. Can cause safety issue to accelerate while pulling in front of traffic. Truck has been to the dealer. Dealer says no codes triggered but the pausing still persists and is only getting worse. Truck has been doing it since around 30,000 miles. Truck currently has 36,760 miles.

    Source: NHTSA WEB SITE
  • 2024 CHEVROLET COLORADO
    - Stamford, CT

    Vehicle: 2023 Chevrolet Colorado Trail Boss Mileage: Approximately 14,000 miles I am submitting this complaint because the ABS braking system on my vehicle activates unexpectedly and causes a temporary loss of braking when driving over uneven pavement. When braking over potholes, bumps, or rough road surfaces at low to moderate speeds, the ABS system engages even though traction is available. When this happens, brake pressure is reduced to the point where the vehicle does not slow as expected. The ABS warning indicator flashes briefly, and there is a noticeable delay before normal braking resumes. This behavior has occurred multiple times in normal driving conditions on city streets, not during panic stops or slippery conditions. The issue feels most pronounced when approaching intersections or slowing in traffic over broken pavement, where consistent braking is critical. The momentary reduction in braking force significantly increases stopping distance and creates a safety concern. The vehicle has low mileage, has not been modified, and is maintained as delivered from the manufacturer. There are no warning lights remaining on after the event, and the issue appears to be related to ABS calibration rather than driver input or road conditions. This does not feel like normal ABS operation and gives the impression that braking is interrupted at the exact moment it is needed. Given the frequency and repeatability of the issue, I believe this represents a potential safety defect that could contribute to a collision, particularly in urban driving environments with uneven road surfaces. I am submitting this complaint to document the issue and to request that the ABS braking behavior on this vehicle be reviewed for safety.

    Source: NHTSA WEB SITE
  • 2012 CHEVROLET SILVERADO 3500
    - Pasco, WA

    Tire - 265/70 r18 Cooper Could have been a very bad accident. Tire blew out. The tire was inspected by Goodyear PCA-Visual only -recvd below response after several requests. All Internal Goodyear visual Inspection procedures & methodologies are confidential and/or proprietary information of The Goodyear Tire and Rubber Company. Goodyear's findings in this claim are final, and we have closed our file with no further action.

    Source: NHTSA WEB SITE
  • 2018 CHEVROLET MALIBU
    - Ypsilanti, MI

    Shift knob found grounding inside shifter..had to PAY OUT OF POCKET. $1087 TO HAVE SHIFTER REPLACED!

    Source: NHTSA WEB SITE