2020 CHRYSLER PACIFICA Complaints

The braking system does not respond in time - there is a delay which almost caused an accident once and did end up causing an accident in Dec of 2021. My daughter was in the car, and my husband was driving. His back was injured, and thank goodness my daughter was not hurt. I tried to contact Chrysler three times (2 times via filling their customer service form and once over the phone), and they said there is nothing they could do and finally gave this form to complete if I was concerned hence writing today. The delay in the brake system is a significant issue, and our local dealership and repair stated there is nothing they could do. Contact Customer Service of Chrysler and Chrysler service representative said there is no recall, so he cannot do anything about this critical safety matter. After a lengthy conversation, he referred me to you. We bought this van for our family, including young children (purchased days before the birth of my son) and elderly parents, and it cost us over $57,000. I am very disappointed in Chrysler for not taking this braking delay issue seriously. We even tried to sell our vehicle, but the price is $13000 less than what we paid in just about a year, which we cannot afford anymore. Besides this vital safety issue, we are very much satisfied with our vehicle and are concerned that others might be in a similar situation to us while Chrysler is not even listening to this vital safety concern; hence I am writing.

Ice buildup in the fender well to the tire which effects turning and steering. It happened all last winter and twice this year.

The van has experienced loss of braking twice during our 17,000 miles of ownership. During a braking sequence, the brakes essentially gave out and almost felt like the van lunged forward. Driver instinct was to push the pedal to the floor and after a second or so, the van braking recovered. I believe it to be an issue with the transition between regenerative braking and traditional braking. I have read forum posts with similar experienced, but have not received support of confirmation from Chrysler. I have driven many vehicles over my 22 years and have never experienced a loss of braking this significant.

Complete failure of electrical system. When it happened the display screen said the vehicle will shut down soon. Suddenly everything started turning on and off, the transmission disengaged. The motor started racing with all electrical components turning on and off and suddenly everything shut off. All vehicle components were rendered useless. Chrysler dealership tried jump starting the vehicle and nothing happened, no power at all. They then tested both batteries with a GR8 and found that the auxiliary battery had failed. After testing the charging system they found that the Power Control Unit was the issue. They corrected by replacing the Relay, and the PCM Powertrain Control Module. They replaced the auxiliary battery and cleared all codes. Started and found that the vehicle was not charging. They then replaced the POWER CONTROL UNIT. The vehicle is charging the auxiliary battery correctly. This happened on a vehicle that was less than a year old and had 9,338 miles on it

I was sitting at a traffic light when an alarm went off the message came up that read "Auto/start stop not available" my car automatically went into Park on its own, the emergency brake came on and a warning light came on. I had to turn off the car and restart it. I was in very busy traffic. The light remained on until I was able to get home. It was a holiday weekend so I could not take to service station and it is my only vehicle. I turned the car on the next day and every thing was fine. This happened 3 months ago as well. The engine has not been stopping I noticed at a traffic light now.

I was travelling on I-95. My 2020 Chrysler Pacifica Hybrid completely shut down while driving at 65-70 mph. A Service Charging System message flashed on the dash. The van decelerated and another message "put in park to start" flashed. All of this was while I was driving on the interstate. I was able to brake to a stop on the shoulder and turn on the hazards. I was NOT able to turn off the car. The gears would not move. I could not put it in Park. After 20 minutes I was able to put it into park and turn it off. I restarted the van, but the same message flashed and I could not move. The van was towed to a Chrysler dealership. They had the car Monday and part of Tuesday. They could not duplicate the issue and could not find any error messages. They said they checked the battery several times and it was fine. There was nothing else they could do and sent me home with the van. Fortunately, I was in the right hand lane when this happened. I don't know what would happen if this occurs while in the middle lane and would need to maneuver to the shoulder. I have found that this is not a unique situation and the exact thing has happened to many other Pacifica owners. Unfortunately, I do not believe this is the last time this will happen. I am TERRIFIED to drive this van. I would guess a battery, electrical or computer issue, only because of the many messages on the dash and the inability to turn off the vehicle. I will gladly offer my van for inspection if requested.

My wife recently noticed that the garage door opener intermittently stopped working and then unfortunately she was driving in the rain and figured out the windshield wipers do not function anytime the garage door opener stops working. Fortunately no accidents, but safety hazard indeed. Taking to dealer tomorrow. I have a video but cannot get it to upload

While driving on electric only power at highway speeds, the van stalled. The dash showed "put vehicle in park to restart" and I had to pull over with no ability to accelerate, come to a complete stop, and place the vehicle in park in order to start the van again. This happened several times, the dealership was unable to recreate the stalling issue, but found two codes stored from the check engine light coming on just prior to the stalling: P0A43 - Drive Motor A Position Sensor Circuit Intermittent P0A3F - Drive Motor A Position Sensor Circuit Both Chrysler and the dealership initially refused to attempt any repairs, and wanted me to take possession of a vehicle that is randomly stalling at highway speeds, which is extremely dangerous. When I refused and pushed them to actually address the codes, they decided to replace the transmission, which houses Drive Motor A. This same issue and process has been repeated with Pacifica Hybrid models ranging from 2017-2021, and is widely reported on the website Pacificaforums.com

Husband was driving the vehicle on a highway during a road trip and it turned off while he was driving. It generated a “charge fault” message on my phone (uConnect). He pulled over to the shoulder, had to start it again, got going, and it died again. He managed to limp it into the nearest town, we had to pay to have it towed and rent a car to get our family home. Vehicle has fewer than 8,000 miles on it, was purchased new December 2020.

The contact owns a 2020 Chrysler Pacifica Hybrid. The contact stated while driving 5 mph, the front windshield wiper arms started to malfunction. The contact stated that the driver’s side wiper arm seized and caused damage to the body of the vehicle. The vehicle was diagnosed and repaired. The manufacturer was informed of the failure and advised the contact to file a complaint. The failure mileage was approximately 13,500.