2001 DODGE DAKOTA Complaints

ENGINE WAS OVERHEATING WHEN AIR CONDITIONER WAS TURNED ON. THIS WAS DUE TO THE FAN CLUTCH NEEDING TO BE REPLACED. ALSO, OIL PRESSURE GAUGE IS BROKEN IN INSTRUMENT CLUSTER AND SO IS NOT REPORTING OIL PRESSURE ACCURATELY. THE ENTIRE INSTRUMENT GAUGE CLUSTER NEEDS TO BE REPLACED TO REPAIR THIS. *KB

TL-THE CONTACT OWNS A 2001 DODGE DAKOTA. THE CONTACT STATED THAT THE CRUISE CONTROL, AIRBAG AND HORN WERE DEFECTIVE. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER WHERE THE CONTACT WAS INFORMED THAT THE CLOCK SPRING WAS DEFECTIVE AND NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 100,000 AND THE CURRENT MILEAGE WAS 111,000. THE VIN WAS UNAVAILABLE.

TL* THE CONTACT OWNS A 2001 DODGE DAKOTA. THE CONTACT STATED THAT THE PASSENGER SIDE UPPER BALL JOINTS ARM SEPARATED FROM THE WHEEL. THE VEHICLE WAS TAKEN TO A MECHANIC SHOP WHERE THE CONTACT WAS AWAITING REPAIRS. THE DEALER WAS CONTACTED WHO OFFERED NO ASSISTANCE. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE AND THE VIN WAS UNAVAILABLE. THE FAILURE MILEAGE WAS 140,000.

AN EXISTING NHTSA RECALL, 06V039000, EXISTS FOR 2006 DODGE DAKOTAS. "STATIC CAN DISABLE HEADLAMPS, TURN SIGNALS, & WINDSHIELD WIPERS". I HAVE A 2001 DAKOTA WITH THE SAME ISSUE. IT HAPPEN 2-5 TIMES PER YEAR. EVERYTHING WORKS AGAIN IF I CYCLE THE IGNITION, BUT THAT 'S SMALL COMFORT IF THE HEADLIGHTS GO OUT @ 75 MPH. DODGE HAS REFUSED TO FIX IT FOR FREE, SAYING THAT IT ONLY APPLIES TO 2006. IF IT IS A SAFETY ISSUE FOR A 2006, THEN IT IS A SAFETY RISK FOR 2001 TOO. THE KNOWN FIX IS TO "RE-FLASH" THE DASH, WHICH I ASSUME MEANS TO REPROGRAM THE DASH CONTROL PROCESSOR.

2001 DODGE DAKOTA: CLOCKSPRING FAILURE LEADING TO NON FUNCTIONING HORN AND AIR BAGS: HISTORY: NORMAL USE, VERY LOW MILEAGE (27000) SYMPTOMS: ON-STEERING-WHEEL HORN AND SPEED CONTROLS FAIL, THEN AIRBAG SYSTEM CAUSE: FAILURE IN CLOCKSPRING. PREVIOUS RECALLS FOR DODGERAM, DAKOTA AND DURANGO COVER THIS IN OTHER MODELS, BUT NOT MINE ALTHOUGH MY DAKOTA WAS BUILT IN ONE OF THE RECALL-EFFECTED PLANTS DURING THE MDH TIME RANGE: SEE RECALL #982 REPAIR: REQUIRES REPLACING CLOCK SPRING $180 "STREET PRICE" FOR PART PLUS LABOR. COMMENT: INTERNET SEARCHES SUGGEST THIS IS A COMMON PROBLEM WITH DAKOTA TRUCKS OUTSIDE THE AFOREMENTIONED RECALL. IT MAY BE APPROPRIATE TO INCREASE THE RANGE OF COVERAGE OF MODELS, VIN'S AND MDH'S SUBJECT TO RECALL. *TR

RECALL ID # 03V389000: ON 2001 DODGE DAKOTA WIRING HARNESS REROUTING/REPAIR RECALL ID#09EO12000 EXTERIOR LIGHTING RECALL ID#09EO25000 EXTERIOR LIGHTING HEADLIGHTS THE 2001 DODGE DAKOTA WITH AUTOMATIC TRANSMISSION HAS THE SAME PROBLEM WITH TURN SIGNALS ,TAIL LIGHT, DASH LIGHTING, & RADIO FAILURE I HAVE TALKED TO 20 OR 30 DAKOTA OWNERS WITH AUTOMATIC TRANSMISSION &SAME PROBLEMS. *TR

NO CRASH, NO INJURIES. 2001 DODGE DAKOTA CREW CAB, COLUMN SHIFTER SHIFTS OUT OF PARK WITH OUT PRESSING BRAKE WHILE THE KEY IS IN THE ON POSITION. *TR

I BOUGHT MY 2001 DODGE DAKOTA QUAD CAB BRAND NEW AND UNTIL THIS DATE, I HAVE ONLY HAD ONE ISSUE. THE POWER WINDOW MOTOR QUIT AND WAS REPLACED IN 2008. ON OCTOBER 1ST, 2010, MY CRUISE CONTROL WENT OUT. THINKING IT WAS WEAR AND TEAR, I WAS NOT IN A RUSH TO FIX IT. THEN THE HORN QUIT WORKING. WHEN THE AIR BAG LIGHT STARTED FLASHING WHEN I TURNED THE STEERING WHEEL, I TOOK IT IN TO BE SERVICED. MY CONCERN IS THAT I HAVE THE SAME ISSUES AS A PREVIOUS RECALL, BUT MY VIN # IS NOT INCLUDED IN THAT PERIOD. MY MECHANIC SAYS IT IS THE CLOCKSPRING ASSEMBLY THAT NEEDS TO BE REPLACED AND THE PART IS EXPENSIVE. LOOKING ONLINE, IT APPEARS DODGE IS NOT MAKING GOOD. MY VIN # MATCHES THE OTHER COMPLAINTS. AFTER CONTACTING DODGE (11/10/10), I WAS OFFERED A 50% REFUND ON REPAIR WORK. THIS SAYS TO ME THAT THEY ACKNOWLEDGE THERE IS SOMETHING WRONG WITH OTHER MODELS/YEAR. THIS IS UNACCEPTABLE NO MATTER HOW OLD THE VEHICLE IS. IT IS A SAFETY ISSUE WITH DODGE. *TR

I HAVE A 2001 DODGE DAKOTA. WHEN NEW, I INSTALLED A CURT MANUFACTURING TOW HITCH. I TAKE GREAT CARE OF MY VEHICLES. I TOW ONLY ON RARE OCCASIONS, PROBABLY 6-10 DAYS A YEAR. RECENTLY, I NOTICED EXTREME CORROSION ON THE SIDE SUPPORTS AND MAIN TUBE OF THE TOW HITCH. I HAVE NO OTHER CORROSION OF THIS SORT ON MY VEHICLE. THE SIDES SEEM TO BE CORRODING IN SHEETS (STEEL) AS IF IT WAS A PLYWOOD. IT IS TOTALLY UNSAFE TO TOW ANYTHING WHILE IT IS IN THIS CONDITION. IT NEEDS TO BE REPLACED. CURT HAS A LIFETIME WARRANTEE. I CONTACTED THEM AND SENT PICTURES. I BELIEVE IT MAY BE INFERIOR STEEL OR COATING FROM FACTORY. ANYWAYS, THEY DENIED MY CLAIM. I WANTED A REPLACEMENT. I HAVE ORIGINAL RECEIPT AND INSTRUCTIONS. I AM CONCERNED THAT OTHERS MY HAVE THIS, AND IF NOT ADDRESSED COULD LEAD TO A CATASTROPHIC TOWING ACCIDENT AS EVERYTHING TOWED CONNECTS ONLY TO THIS ACCESSORY. *TR

MOVEMENT OF TILT STEERING WHEEL IN LOWER HALF OF RANGE WILL CAUSE SHORT-CIRCUIT OF TURN SIGNAL OPERATION. LEFT AND RIGHT TURN SIGNAL WILL BE INOPERATIVE. RADIO CIRCUIT ALSO AFFECTED. MOVEMENT BACK INTO UPPER HALF OF RANGE WILL CORRECT PROBLEM. *TR