2012 DODGE RAM 2500 Complaints

Tie rod end sheared/broke causing the vehicle to be un-stearable. Fortunately, it happened as I was backing out of my driveway.

Exhaust Manifold on passenger side is leaking. It has a broken bolt due to manifold warping. This is causing exhaust to leak into the cab.

The contact owns a 2012 RAM 2500 equipped with Kenda Tires, Tire Line: Klever, Tire Size: LT275/70/R18, DOT Number: 02T6NAANL12228260. The contact stated while driving 60 MPH, the vehicle started bouncing. The contact stated no warning light was illuminated. The contact continued to drive back to the tire shop and was informed that the front passenger’s side tire was showing tread separation. The tire shop replaced the front passenger’s side tire. The contact stated that approximately two weeks later, he experienced the same failure with the front driver’s side tire. The contact took the vehicle back to the tire shop and had the front driver’s side tire replaced with the spear tire. The vehicle was not diagnosed or repaired. A dealer was not contacted. The contact stated that he had left a voicemail with the manufacturer but had not yet received a callback. The failure mileage was approximately 151,000.

When driving at highway speed, if I hit the seam between the road and a bridge and it is not smooth my truck goes into a, "Death wobble." The steering wheel and the whole truck shakes uncontrollably. I can barely keep it in the road. It will only stop when the vehicle slows below 30mph. This problem started about 48,000 miles, I only have a little over 56,000 now. I have changed the stabilizer, got new tires and an alignment. I will be taking it to a mechanic on the 17th but I really believe the manufacture should have a recall on this vehicle. It is very dangerous. I am not the only person to own one of these trucks and this happens to.

The exhaust manifold bolts on both sides of the engine warp due to two different metals being put together under heat. Steel and aluminum expand at different temperatures. This causes the bolts to break off of the exhaust manifold creating an exhaust leak into the engine bay. Yes, this can be inspected upon request. The safety of myself and the general public is at risk due to the exhaust leak into the engine bay being pulled into the cab via the heating or airconditioning system. The exhaust fumes are pulled into the cab of the truck via the heating and airconditioning system. When running, the truck has a very noticeable smell inside the cab. It has caused me headaches as well. This poses a risk to the public if the driver were to pass out from said fumes. The problem can be reproduced and is a known issue with Dodge. It is very well documented online that this problem happens to nearly all Dodge Ram trucks. It has never been recalled because Dodge says its not a "safety" concern. This is very much so a safety issue. The components have been inspected by others, and verified as broken. I will not take it to a dealership to have it inspected as they want to charge 150$/hr to diagnose something that even they recognize as a known issue. There were no warning lamps, messages or any visible indication of this problem. A loud ticking noise and a strong smell of exhaust fumes are what brought the issues to attention.

My Dodge Ram 2500, 2012 Hemi engine started making a ticking sound so got a tune up. The machinic changed the spark plugs and distributors around after I complained. Nothing he was able to do enable the truck to function properly. I spoke with the Dodge dealership, the spoken informed me that when Dodge merged with MERCEDE the problem persisted and to this date a fix was not provided. I spoke with other Dodge owner who experience the same problem. The engine was not functioning properly because of internal damage. The cost of repair would cost between $8K and $10K to replace or repair the engine. The dealership stated that NHTSA nor Dodge have provided a fix and that the problem still persist to this day.

Engine has been making a ticking noise on the passenger side for the past few months. The passenger side exhaust manifold warped and broke two bolts in the engine block. This caused an exhaust leak and made the truck run rich due to the leak before oxygen sensor. Fuel efficiency declined. Replaced the exhaust manifold, gasket, and bolts to repair the problem.

The bolts holding the exhaust manifold to the engine cylinder head, are breaking off. This has occurred in the past, on the drivers and passengers side. I had the problem repaired, by a dealer, which required the replacement of the passenger side cylinder head as well. This issue has re-occurred on the drivers side, which has been confirmed by a Ram dealer, as shown in the attached documentation. In every instance, the issue starts with a tapping noise, as the exhaust manifold pulls away from the head. Passengers in my truck have complained about the smell of exhaust fumes, which is a safety and health issue. This truck only has 85,000 miles, yet this is the 3rd incident of this issue occurring.

The contact owns a 2012 Ram 2500. The contact stated while driving approximately 40-60 mph, on several occasions after driving over a bump in the roadway, the vehicle loss steering and braking functionality before the vehicle loss motive power. The vehicle was taken to an independent mechanic who diagnosed that the wireless ignition node module was faulty. The mechanic retrieved a fault code. The vehicle was not repaired. The dealer and the manufacturer were made aware of the failure however, no assistance was offered. The contact was relating the failure to NHTSA Campaign Number: 10V200000 (Electrical System). The failure mileage was 216,000.

The contact owns a 2012 Ram 2500. The contact stated that after making the third right turn while driving approximately 3 -5 MPH, the steering linkage fractured and the vehicle loss steering functionality. The vehicle was towed to the dealer to be diagnosed. The contact was informed that the drag link and the steering system needed to be replaced. The drag link was repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 170,000.