2003 FORD CROWN VICTORIA Complaints

I'm having problems with the lighting control module my high beam lights stop working. I see this year (2003) Ford crown Victoria has a recall for the lighting control module but mines isn't listed when I put in my VIN number and I wanted to see if mines can be listed. Also I would like to know why wasn't it listed on the recall list because this is a safety issue and very dangerous.

The contact's father owns a 2003 Ford Crown Victoria. The contact stated that the headlamps would flash and failed to turn on or to turn off as intended. The contact stated that the failure initially occurred intermittently, but the headlights had become completely inoperable. The vehicle was not taken to the dealer. The vehicle was not diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 15V861000 (Exterior Lighting), which described the failure; however, the VIN was not included. The manufacturer was not made aware of the failure. The failure mileage was unknown.

I brought this vehicle into the dealership for safety recall 15s39. There were no problems with the vehicle prior to taking it in. When I received the vehicle back from the dealer they had admitted to not completing all the steps in the safety recall. Now that I have the vehicle the dealer returned it to me with the following issues: all of the interior and exterior lighting including the headlights do not work and the air bag light is illuminated. A supervisor at Ford customer service said they refuse to do anything about the new problems they caused. She stated that "well, it's a pretty old car." I don't think the age of the car should give Ford a pass to not fix a safety recall. The fix for their safety recall only created safety problems with this car - namely the air bags may not work.

The contact owns a 2003 Ford Crown Victoria. The contact stated that while driving at an undisclosed speed, the contact became aware that both headlights were inoperable. The contact stated that the headlights failed to function properly and had become inoperable. The vehicle was taken to the dealer, where it was diagnosed and determined that the lighting control module had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was not available.

When driving at night and early mornings my head lights and tail lights will randomly go out when my light switch is set to automatic. I can turn it on manually and then I have head lights and brakes but no running tail lights. Which is a major problem and safety hazard.

The contact owns a 2003 Ford Crown Victoria. The contact stated that after starting the vehicle, the contact smelled an abnormal coolant odor. The contact inspected the vehicle and noticed there was corrosion and a crack near the intake and radiator hose. No warning lights were illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed that the intake manifold needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The approximate failure mileage was 70,000.

MY 2003 CROWN VIC HAS A HORRIBLE TIME STEERING I'VE WATCHED SEVERAL VIDEOS THAT DEPICTS EXACTLY THE SAME ISSUE. YOU HOWEVER DO HAVE A RECALL OUT FOR THIS MAKE JUST STARTING AT 2005. I FIND IT HARD TO BELIEVE THAT I AM THE ONLY ONE THAT'S MADE A COMPLAINT. PLS GET THIS FIXED IM 67 AND WITH CANCER MY ONLY WAY OF GETTING AROUND. PLEASE CONTACT ME ASAP THIS IS SERIOUS. OF COURSE IT ON MOLLY DOES THIS WHEN IN MOTION.

THESE PARTICULAR WHEELS ON THE CROWN VICTORIA POLICE INTERCEPTOR WERE KNOWN TO CRACK, AND LEAK AIR, CAUSING AN ACCIDENT. THEY WERE RECALLED BY FORD, BUT THE POLICE DEPARTMENT THAT PURCHASED THIS VEHICLE, YAVAPAI-APACHE POLICE IN CAMP VERDE, AZ, NEVER HAD THEM REPLACED. I AM CONSTANTLY ADDING AIR TO MY TIRES. LUCKILY I HAVEN'T HAD A BLOWOUT. I WOULD SETTLE FOR A USED SET OF STOCK WHEELS(12 HOLE TYPE) TO REPLACE THE CURRENT 8 HOLE TYPE, SINCE I STILL HAVE THE ORIGINAL HUBCAPS ON THE VEHICLE

A COUPLE OF YEARS AGO WHILE ON VACATION 200 MILES FROM HOME WITH MY FAMILY THE HEADLIGHTS SUDDENLY WENT OUT. AFTER A LITTLE INSPECTION I FOUND WE STILL HAD FLASH TO PASS HIGH BEAMS. THE NEXT DAY (JULY 3RD) I WENT TO THE LOCAL DEALER AND THE PARTS HOUSES AND NO ONE HAD A REPLACEMENT. AS A FORMER USAF JET ENGINE MECHANIC I WENT BACK TO THE CAMPER AND FOUND A WIRING DIAGRAM. I FIGURED OUT IT WAS A PROBLEM WITH THE LIGHTING CONTROL MODULE. I TOOK IT APART AND REPLACED THE DEFECTIVE RELAY. WE FINISHED OUR VACATION AND I SOON FORGOT THE ISSUE. I RECEIVED A RECALL NOTICE FOR THE MODULE AND TOOK IT TO THE DEALERSHIP FOR REPLACEMENT. I WAS INFORMED BY THE SERVICE MANAGER THAT SINCE I HAD REPAIRED THE PART FORD WOULD NOT TAKE IT BACK SO THEY COULD NOT HELP ME. I HAD THE SNEAKING FEELING I WAS BEING LIED TO. I WENT HOME AND RESEARCHED THE RECALL. I FOUND THE REPAIR DOES NOT EVEN INVOLVE REPLACING THE PART BUT TAPS INTO THE WIRING BEFORE THE MODULE. I CALLED FORD CORP AND WAS TOLD THEY DID NOT UNDERSTAND WHAT I WAS TALKING ABOUT AS THEY WEREN'T A TECHNICIAN BUT THEY STOOD BY THEIR DEALERS DECISION. I DON'T FEEL THAT I SHOULD BE PUNISHED FOR DOING WHAT IT TOOK TO GET MY FAMILY HOME SAFELY. I HOPE YOU CAN HELP ME WITH THIS PROBLEM

ON APRIL 14TH 2017 A RECALL WAS ISSUED (RECALL ID = 264137) ON 2003-2005 FORD CROWN VICTORIA'S MANUFACTURED OCTOBER 3RD, 2001 THROUGH AUGUST 2ND, 2005. NHTSA CAMPAIGN # = 15V861000. THE RECALL WAS ON THE AFFECTED COMPONENT, EXTERIOR LIGHTING, HEADLIGHTS. I HAVE A FORD CROWN VICTORIA THAT WAS MANUFACTURED IN MAY OF 2002 THAT HAS THE EXACT SAME ISSUE. YET WHEN I CONTACT FORD ABOUT THE ISSUE THEY SAID MY VEHICLE WAS NOT INCLUDED IN THE RECALL. WORKING WITH A MAJOR AUTOMOBILE COMPANY PREVIOUSLY IN HONDA OF AMERICA, I TRIED TO UNDERSTAND WHY YET FOUND NO RELIABLE ANSWERS. I'VE BEEN HAVING THIS ISSUE FOR MULTIPLE YEARS WHERE MY HEADLIGHT WILL COME ON AND JUST SHUT OFF WHILE DRIVING.