2020 FORD ESCAPE Complaints

The contact owns a 2020 Ford Escape. The contact stated that while opening the front driver's side door, the door made an abnormally loud popping sound. Additionally, the door failed to open completely, and the window failed to roll down completely. The local dealer and manufacturer were notified of the failure, but no assistance was provided. The vehicle was not diagnosed or repaired. The failure mileage was 40,000.

hi, I don't feel secure anymore driving this car with this fire recall, what can I do? Nobody want to buy that car with this failure. Best Regards [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The passenger door hinge made a large noise and was unable to close without extreme force. It was a safety issue as the car function and hinge mechanism failed. The dealer turned me away as they do not "weld" and referred me to a body shop. Yes, my independent auto service stated that the Door Stay and Mounting Bracket three small welds broke off. They were unable to re attach door properly as they do not weld. They noted the drivers side door is also starting to loosen. This is another safety concern.

The contact owns a 2020 Ford Escape. The contact stated that the front driver's side door made an abnormal popping sound while driving. The vehicle was taken to the dealer, who diagnosed that the driver's side door check arm attachment point had failed. The contact related the failure to NHTSA Action Number: PE23013 (Structure). The manufacturer was notified of the failure but offered no assistance. The contact was later referred to the NHTSA Hotline for assistance. The vehicle was not repaired. The failure mileage was 45,000.

So there is multiple issues with my vehicle. First: I had the recall issue with the fuel injector "fixed" as the dealer stated. Now CO2 is leaking into my cabin when the car is parked and/ or when the remote start is activated. You can not breathe. I bought this car because I have 2 boys in car seats still. It is a serious hazard for anyone that breathes it in, especially kids. Second: after pumping gas it chugs. Like it will try to crank up but can't. I have had this car for less than a year. After the dealership "fixed" the fuel injector this issue started. When it finally starts the car smells strongly of gas. Third: there was a recall on a hose that had to do with the A/c system. It leaked onto wires and caused a shortage in my whole electrical system which in turn caused the vehicle to shut down on me while I was driving on the interstate. Fourth: The blind spot warning goes crazy when you are driving down a road with no one beside you. Fifth: The lane keeping assistant has completely stopped working. I have reset the system and it still will not work. Sixth: the radio, bluetooth, sound system does not work because of the water that leaked onto the wires from the A/C pipe that was recalled. Now my biggest issue is that the dealership that I purchased the vehicle from tried to charge me to have the recalls fixed. I had to take it to another dealership and afterwards was informed that, that specific dealership will claim to replace the recalls but not actually do the work so that way you have to come back and they can charge you for the work. Could you guys please look into this? Please call me at [XXX] in regards to the issues, so you can experience them first hand with me. Thank you so much for your time. Also if you google the problems everything i listed is a HUGE ISSUE with this vehicle but nothing is being done about it. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

On February 23,2024 the driver door started making very loud scraping and popping noises with physical resistance to opening or closing. The drivers power window started working very slowly like it was being dragged on, and then wouldn't go back up. Pushing on exposed window edge got it finally to go up and close. Over the next several days the noise and resistance has gotten worse. Found out NTSB has opened an investigation into this issue, and Ford has a service memo SSM 50150 as the cause is faulty spot welds on interior door anchors which can lead to door failure and unexpected opening. SO far Ford has not offered any help to repair this issue. I have filed a claim without result yet.

* Spot Weld Joints failed on driver side door. The welds have failed. * Cannot open drivers side door due to to spot weld failure. * Dealer has seen the issue and said the only option is a new door. *Dealer has notified Ford Motor Company. I have a 5 year 100,000 mile bumper to bumper warranty that I purchased from Ford Motor Company. Ford told the dealer it is not a part failure so not covered under my warranty and the cost should fall back to the customer. *No. I was getting into my car to leave work on 2/15/2024 and when I opened the door I heard the loud popping/cracking sound.

The contact owns a 2020 Ford Escape. The contact stated that while entering the vehicle, the front driver's side door made an abnormal popping sound. The vehicle was taken to the dealer, who diagnosed the vehicle and determined that the driver's side door check arm attachment point had failed. The vehicle was not repaired. The contact related the failure to NHTSA Action Number: PE23013 (Structure). The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was 51,000.

The contact owns a 2020 Ford Escape. The contact stated that while opening the front driver's side door, there was an abnormal cracking sound heard. There were no warning lights illuminated. The vehicle was taken to the local dealer, where it was determined that the driver’s side front door was cracked or had a fractured spot weld at the check arm attachment in the door assembly. The dealer informed the contact that the door needed to be replaced. The vehicle was not repaired. The manufacturer was contacted, and informed the contact there was no coverage under a recall or warranty for the repair. The contact stated that the failure was related to NHTSA ID Number: 10234590, Manufacturer Communication Number: SSM 51553 (Structure). The failure mileage was approximately 33,000.

Drivers door spot welds that hold the reinforcing angle for the door check have broken loose allowing the door check angle to move inside of door, this makes it difficult to close the door all the way because the angle is hitting something inside of the door. Looking online this appears to be a common problem, Ford issued a service bulletin for this issue, (SSM 50150), we called the local Ford dealership and was told that since the vehicle is out of warranty there is nothing they can do. Vehicle has about 14,000 miles on it but is about 8 months out of warranty, it was used very little for the first 2 years due to Covid 19 pandemic shutting down the University that is the owner. The passenger door spot welds are also beginning to break loose.