2016 FORD EXPLORER Complaints

The contact owns a 2016 Ford Explorer. The contact received notifications of NHTSA Campaign Numbers: 24V031000 (Structure) and 25V347000 (Structure). The contact stated that water was leaking onto the passenger’s side floorboard and passenger’s side door, causing an electrical short with the windows. The contact stated that the window was stuck. The contact left the windows opened to air out the vehicle. The contact used duct tape to secure the structure. There were no warning lights illuminated. The local dealer was contacted and confirmed that parts were not yet available. The contact was added to a waiting list. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 86,800.

The contact owns a 2016 Ford Explorer. The contact stated that the vehicle lost power steering assist functionality, and the steering wheel was stuck while attempting to turn the steering wheel to the left or the right. There were no warning lights illuminated. The contact spoke with the dealer and was informed that the power steering assist had failed and needed to be repaired. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 97,000.

I am writing to you today with an urgent and serious safety concern regarding my 2016 Ford Explorer XLT. My vehicle is affected by the A-pillar molding inspection recall, Campaign 24S02/24V031. Last week, while I was driving on the interstate, the passenger side A-pillar molding detached from my vehicle and flew off. This created an extreme safety hazard for myself and other drivers on the road. I contacted my local Ford dealership, Cloninger Ford of Salisbury, to have the recall addressed. They informed me that they cannot perform the repair because the necessary part is out of stock. This is a critical safety issue. The driver's side A-pillar molding is also loose and could detach at any time, posing the same risk. I have found the replacement part is available for purchase from various online retailers, which contradicts the dealership's claim of part unavailability. The recall documentation states that a detached trim piece can become a road hazard, increasing the risk of a crash. Given that this has already occurred with my vehicle, I need an immediate and concrete solution. I am requesting a specific timeframe for when a permanent remedy will be available for recall 24S02/24V031 and when I can bring my vehicle in for the repair. The safety of myself and others on the road is at risk. Thank you for your prompt attention to this matter. [XXX] [XXX] [XXX] VIN: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2016 Ford Explorer. The contact stated while driving at various speeds, the driver's side exterior A-pillar trim was hanging off the windshield, obstructing the contact's view while driving. The contact stated that condensation was entering the vehicle through the driver's side exterior A-pillar trim, also obstructed her view while driving. The contact later received notifications of NHTSA Campaign Numbers: 24V031000 (Structure) and 25V347000 (Structure); however, the parts to do the recall repairs were not yet available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was made aware of the failure but offered no assistance. The failure mileage was approximately 65,000.

The contact owns a 2016 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (STRUCTURE); however, the part to do the recall repair was unavailable. The contact used tape to secure A-pillar trim to prevent the trim from detaching from the vehicle. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

2016 Ford Explorer. A-Pillar trim piece flew off vehicle while driving on highway. Part recalled Jan 2024, currently no solution available from Ford. Paid out of pocket to replace in 2022. B-Pillar trim piece flew off vehicle while driving on highway, remained attached by soldered wires. Part recalled May 2025, currently no solution available from Ford. Paid out of pocket to replace heavy duty, waterproof double sided tape in Jan 2025, tape failed again by July ‘25. Cannot tie piece on because the window won’t function. Tape fails, so currently having to reattach while driving with my arm out the window or pull over every few minutes and drive slowly. Left with no options to repair from Ford!

I was made aware of a recall for my 2016 Ford Explorer Sport involving the Exterior A-Pillar Appliqué molding recall#24S02 and NHTSA# 24V031 I had an inspection done on 12/30/24 and it was determined at that time it needed to be replaced, but parts were not yet available. I have since then regularly checked with the dealership to see if parts were available, but they have not become available. I reached out to Ford directly on 7/28/25 and was told my case was escalated and I need to work with my 'case handler' who did not contact me until 8/11/25 after I made multiple repeated requests to speak to someone. They informed me there are no parts, there is no ETA and despite assurances to the contrary(they informed me that they "...works daily with your dealership's management team." have not spoken to the service advisor at the dealership as of yet. their case number at ford is [XXX] The part flew off on the highway on [XXX] and now today, [XXX] the rubber around the windshield is coming loose. Ford continues to say they have no updates. The dealership said the last they checked, last week, there were over 30,000 orders in for this part, that Ford was no longer accepting new orders from dealers for this, and that they will not give any ETA on this being remedied. I'm concerned that more damage is being done to my vehicle and based on Ford's behavior thus far will try to not cover any additional repairs that caused by their inability to provide a repair in a reasonable and timely fashion. I'd like this repaired, correctly, and any other repairs necessary due to the delay, by no later than the end of the month of August. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2016 Ford Explorer. The contact stated that the passenger’s side A-pillar trim was loose. The contact used glue to secure the trim piece. The contact had not taken the vehicle to a dealer. The contact had received notification of NHTSA Campaign Number: 24V031000 (Structure) and 25V347000 (Structure); however, after calling the dealer to schedule an appointment, the contact was informed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed of the failure. The failure mileage was approximately 115,000.

The contact owns a 2016 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the front driver’s side and passenger’s side A-pillar trims detached. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 120,000.

The water pump has been replaced 3 times within a 2 year period on this vehicle . Something is causing it to fail and the constant leaking of fluid causes the vehicle to drive erratically in highway traffic. The alternator has been replaced twice within a 10 month period. Something is causing it to fail and it has caused major anxiety because the vehicle has completely turned off in the middle of extreme traffic. This is a dangerous situation and has yet to be fully remedied. I believe this model to be a lemon.