2016 FORD FUSION Complaints

View complaints related to 2016 FORD FUSION. The complaints found here are submitted by actual consumers with first hand experience. There are more than 1,610 complaints submitted for the 2016 FORD FUSION. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.

  • 2016 FORD FUSION
    - Indianapolis, IN

    severe coolant intrusion issue where coolant leaks into the cylinders, causing rough running, overheating, and potential engine failure. Very unsafe especially due to the fact the their were recalls on the 2017-2019 but not for 2016 models and ford refuses to replace the engine.ford reproduced a better block however my 2016 isn't covered. There signs of rough idling and a engine code for a failed coil . Replaced all coils and spark plugs just for the car to still ride rough with no warning signs. Ford knows themselves that there was a flaw in the making the recall for the 2017-2019(21N12) . This is a major issue considering several reviews or reddit consumers have encountered the exact issue at 100k miles and less. Even when I took my car to bill estes they only found a missfire due to coil. Nothing specified a coolant intrusion.

    Source: NHTSA WEB SITE
  • 2016 FORD FUSION
    - Chattaroy, WA

    I received a recall notice in October 2025 for the back up camera on my car. As of now, there is still no remedy. This puts me and others at risk of potential injury. I have waited patiently and still no solution. Can you help me?

    Source: NHTSA WEB SITE
  • 2016 FORD FUSION
    - Miami, FL

    The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse(R), the rear-view camera became inoperable. The contact stated that the rear-view camera image failed to function properly, and the image was blurry. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The vehicle was taken to several dealers, where it was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 61,253.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2016 FORD FUSION
    - Broxton, GA

    I have concerns about the safety and proper installation of my child’s car seat. The seat is installed in the rear of the vehicle, however I am unsure if the lower anchors and tether system are functioning properly or securing the seat as intended. I want to ensure my child is fully protected in the event of a sudden stop or crash. Additionally, I am reporting ongoing safety concerns with my vehicle related to open recalls. The manufacturer has stated that certain repairs should be completed free of charge, but the dealership has delayed or failed to complete the repairs in a timely manner. These issues raise concerns about overall safety and risk to occupants, especially a young child. The vehicle and car seat are available for inspection if needed.

    Source: NHTSA WEB SITE
  • 2016 FORD FUSION
    - Broxton, GA

    My vehicle has multiple active safety recalls that remain unrepaired. I have already contacted the dealership and attempted to have these issues addressed, but I have experienced delays and a lack of response. The front brake hose recall presents a serious safety risk, as it could rupture and cause a brake fluid leak, leading to reduced braking ability and increased stopping distance. Additionally, the rear view camera recall affects visibility when reversing, as the camera may display a blank or distorted image.I have already filed a complaint with NHTSA regarding these unresolved recalls. One of the recalls currently does not have a remedy available, and the other has not been completed despite my efforts to schedule repairs.These unresolved safety issues put me and others at risk, and I am concerned about the lack of timely action to correct them.

    Source: NHTSA WEB SITE
  • 2016 FORD FUSION
    - Greenfield, WI

    I took my car in to diagnose low coolant and white exhaust smoke on cold start. The technician said he "observed the presence of coolant inside the cylinder walls which can lead to "serious damage...corrosion...failure and wear and could seize up and told me to get a new engine or car. The vehicle component was inspected by an independent service center. No warning lights prior to failure. Other symptoms include low coolant, white exhaust smoke and runs rough condition especially on acceleration. Vehicle Condition Report (photos and videos) that shows you what our technicians saw today and includes any recommendations. The link to your report is: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

    Source: NHTSA WEB SITE
  • 2016 FORD FUSION
    - Surprise, AZ

    Back-up camera shuts off during operation. Works intermittently and never for a full operation. This is a 2016 vehicle. Ford has be unable to remedy the situation. Camera has been replaced as well as software updates installed. No fix in sight.

    Source: NHTSA WEB SITE
  • 2016 FORD FUSION
    - Santa Rosa, CA

    The contact owns a 2016 Ford Fusion. The contact stated that while in reverse(R), the back over prevention camera malfunctioned and displayed a solid black image or a distorted image. The contact stated that the failure created a visibility hazard for the driver. The cause of the failure was not yet determined. The manufacturer and local dealer were notified of the failure. The contact was informed of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION). The contact stated that the vehicle had experienced the failure listed in the recall, and that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was 45,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2016 FORD FUSION
    - South Bury, CT

    The contact owns a 2016 Ford Fusion. The contact stated that while reversing, the rear-view camera system displayed an unavailable error message. In addition, the contact stated that occasionally the rear-view camera displayed an upside-down image. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part was not available. The manufacturer was made aware of the failure. The failure mileage was approximately 96,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2016 FORD FUSION
    - Staten Island, NY

    My 2016 Ford Fusion SE had a prior safety recall repair in 2020 involving replacement of the steering wheel retaining/attachment bolt with a longer bolt. The bolt now appears to be loosening again. This seems like a recurrence or failure of the prior recall remedy. The dealer told me I had to pay out of pocket and ford corporate said the repair only had a 12-month warranty, but this is a steering safety issue involving the same recalled condition. I am concerned the steering wheel could loosen or separate from the steering column.

    Source: NHTSA WEB SITE