2018 FORD FUSION Complaints

The contact owns a 2018 Ford Fusion. The contact stated that upon taking the vehicle into the dealer for an oil change, the contact was informed that the engine was empty of coolant. No warning lights were illuminated. The vehicle was taken to the dealer, who determined coolant intrusion had caused damage to the cylinder head, requiring a replacement. The vehicle was not repaired. After investigating the failure, the contact related it to Customer Satisfaction Program: 21N12. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 47,000.

The contact owns a 2018 Ford Fusion. The contact stated that after starting the vehicle, he observed excessive smoke coming from the engine compartment as well as the rear exhaust. The check engine warning light was illuminated. The vehicle was taken to the dealer, who determined there was coolant intrusion into the engine cylinder that caused damage to the cylinder head. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. After investigating the failure, the contact related the failure to Customer Satisfaction Program: 21N12. The manufacturer was notified of the failure, and a case was opened. The failure mileage was 89,000.

The contact owns a 2018 Ford Fusion. The contact stated while driving approximately 40 MPH, the transmission inadvertently shifted into a lower gear. The contact stated that the gear shifter failed to shift. The vehicle was towed to an independent mechanic where it was diagnosed that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 72,000.

The contact's daughter owns a 2018 Ford Fusion. The contact stated that while starting the vehicle, the infotainment system screen was black. Additionally, the contact stated that while reversing, the rearview camera failed to activate, and the screen remained black. There was no warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that the rearview camera screen needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 30,000.

The contact owns a 2018 Ford Fusion. The contact stated that while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to pull over to the shoulder of the roadway, where the vehicle was able to be restarted. The engine overheating warning light was illuminated. The vehicle was towed to the dealer, who determined coolant intrusion had caused damages to the engine. The vehicle was not repaired. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 96,000.

I was driving and all of the sudden engine overheated and car could not drive over 10MPH during an extremely bad storm at night on the highway putting me in extreme danger if someone were to have been behind me. There were no engine lights on or warning signs of this happening and just happened out of nowhere car was driving fine before it happened. Issue happened on September 26th, 2023. This is the second engine problem I have had since getting the car in 2021. Last issue was with the top half of the engine CAC/intake manifold and luckily was under warranty or would have been over $6,000. Had vehicle towed to Ford dealership and there verified a check engine light fault. P0303 active in PCM. Upon diagnosing the concern found that the head gasket is leaking into cylinder 2 and 3 due to a failed cylinder block assembly. Need to replace the short block assembly with an updated design. Was quoted $8,700 to fix the issue. I can't afford to pull that kind of money out to fix a car that isn't even 5 years old. Car is no longer under warranty.

The contact owns a 2018 Ford Fusion. The contact stated that the vehicle was hesitating while driving uphill. There was no warning light illuminated. The failure persisted and the vehicle entered LIMP Mode and jerked while depressing the accelerator pedal. The contact also stated that the gear shifter dial became firm and made it difficult to shift the vehicle out of park(P). An unknown dealer and the manufacturer were notified of the failure and informed the contact there was no recall associated with the failure. The vehicle had yet to be repaired. The failure mileage was approximately 100,000.

The contact owns a 2018 Ford Fusion. The contact stated that the engine was running rough while the vehicle was idling. The contact stated that the check engine warning light illuminated the following day. The contact stated that the failure recurred while the vehicle was idling. The vehicle was taken to the dealer, where it was diagnosed that there was coolant intrusion in the engine cylinders, causing the engine to misfire. The dealer related the failure to Ford Campaign Number: 22-2322 and informed the contact that the short block needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA hotline for assistance. The failure mileage was approximately 69,900.

The contact owns a 2018 Ford Fusion. The contact stated that she initially received a notice in the mail about a Customer Satisfaction Program-19B37. The contact took the vehicle to the dealer and was informed that the program was cleared off the vehicle. The contact then stated that while driving at various speeds, the vehicle would hesitate upon depression of the accelerator pedal as the "Service Engine" warning light appeared on the instrument panel. In addition, the vehicle would fail to start upon refueling. The contact used a code reader which determined that the purge valve was defective, and the part was replaced. Once the purge valve was replaced, the vehicle was restarted, and the code reader then showed a misfire in cylinder #2. The contact replaced the spark plugs and engine coils but then noticed moisture in the engine block. The vehicle was taken to the dealer for a diagnostic test where the mechanic confirmed coolant intrusion in the engine block. The contact was informed that the engine needed to be replaced. The dealer reached out to the manufacturer and was informed by text that manufacturer would not assist with the repair of the vehicle. Upon investigation, the contact linked the failure to Customer Satisfaction Program: 19B37. The contact called the manufacturer herself and the manufacturer denied the program. The vehicle was not repaired. The failure mileage was approximately 78,000.

I bought my 2018 Ford Fusion new and it currently has 35,000 miles on it. It began misfiring about 2 months ago, and then the check engine light came on. After a diagnostic exam, I was told the engine needed to be replaced. Luckily I was still within the warranty extension window for this particular problem, so the engine was replaced. However, I spent the majority of this time without my car. They were able to secure me a loaner car, but only for 3 days out of the total duration of the repair. I was stuck without my car the remainder of the time with very little communication from Ford about what was going on. When I asked if my car was still at risk of the same thing happening again, I was given a very vague answer that was not particularly reassuring.