2015 FORD FUSION Complaints

The check engine light came on and I immediately took it to the local Hunt Ford dealer. Upon inspection, there was leaking of coolant into the cylinders and now the engine has to be replaced. The total cost for repairs is approximately $8300. I'm told that the problem has been corrected in the new engines. After talking with Ford Service and a local car repair shop in Franklin, KY, I learned that this is a common problem with Fusions and Escapes and both have replaced many motors. Unfortunately, my car has not been recalled nor was I made of the widespread problem through Ford (my engine is a 1.5-liter EcoBoost 4-cylinder engine). I have done further research into the matter and I'm shocked and disappointed that Ford has not been transparent with consumers about this matter. I have taken immaculate care of my car, serviced it routinely, and always quickly responded to recalls. Now that I know more about the faulty engine, I do recall some random symptoms such as the car loosing a bit of power, smoke out of the exhaust, and the car shaking when started in the morning and having to restart it. All of the symptoms were random and did not consistently happen so I really didn't think much about it. I have a call into Ford's Customer Care Team and they are checking into the matter further. I noticed there's a class action lawsuit filed in Delaware about the engine problem. The firms representing the plaintiffs are Berger Montague PC and Capstone Law APC. I'm thankful that this issue did not put me in arm's way or the safety of others were put at risk.

The car recently misfired 3 times. I took into get oil change and have the misfire checked into. The misfires started 11/4/21. Car would run rough and then stall out. It would sit for a minute or two and start and run fine. There were no check engine lights or gage to show the car was running hot. I never dreamed it was a cracked cylinder. The Dealer performed EEC test diagnosis and found previous misfies in cylinder 1 in mode 6 of PCM. Found coolant level low, pressure tested cooling system and found that cylinder 1 with coolant intrusion. Short block replacement. I see online that there have been recalls on 2013 -2014 Ford Fusion and other 2013-2015 vehicles for this exact problem of a lack of coolant circulation causing an engine to overheat resulting in a crack in the cylinder head. In these models dealers were installing a coolant level sensor with supporting hardware and software at not charge to customer. Ford dealer is charging me $5,000 for short block replacement, which I feel is a defect of the Ford Engine Design. I purchased by car in Nov. 2014 so it only makes sense that this engine had the 2014 design problem. I declined repairs at that moment, to investigate the problem and asked for my car. The dealer stated they had to put my car back together so it would be about 20 mins. When I got the car back it seems to be running normal like when I took it in, but down the road about 3 miles the car started to sputter and stalled. After sitting a few minutes with flasher on in traffic on a major road, the car would start up and wouldn't go over 15 mph and continued to stall. I called dealer and they gave me the number to the towing company they use. The car was towed back to dealership. The Ford dealer is charging me $5,000 for short block replacement. They did file a complaint with Ford Motor Co. Customer Relationship Center and they stated the dealer had opened a case by no programs in place for assistance. The dealer is telling the consumer this occurred due to a Ford design flaw. If this

Swollen lug nuts. 100,000 miles on vehicle. Had tires rotated at discount tires. They had a very hard time removing swollen lug nuts. Had to spend $60 to replace whole set.

On January 1st I left my home to go to a store and noticed the cars shifter had a hard time finding the sport drive and would immediately pop into the regular drive mode. Upon leaving the store my shifter became extremely difficult to move into reverse to pull out of the parking spot. Once I got out of the spot it was even harder to move it into drive. Once it was in drive I drove it back into the parking spot and restarted the car. At this point it was still difficult to put the car into reverse so I figure I would drive the 5 minutes home and figure out what was going on after I got back. Upon getting home I went to put the car into park again and it was stuck in drive even though the shifter indicated the car was in park. I did some research and found there was a recall for certain 2013 - 2016 Ford Fusions because the bushing that connects the shifter cable to the transmission may degrade and break over time. On January 3rd I got the car towed to the dealership for the repairs and found that my car was not covered under this recall (Ford recall # 19S16, NHTSA Recall # 19V362000) as it was not manufactured at one of the locations identified under this recall. The dealership referred me to a corporate representative who told me they could not add my VIN to the recall, however they urged me to contact the NHTSA to see if my VIN could be added to this recall as this is the same issue as outlined within the recall.

Ford Recall from 2019, #19S16 FAILED ..the bushing they replaced as part of this recall has failed, causing the same safety issue the original recall was supposed to fix. The car shifter is in park but the car remains in neutral. Serious safety issue. Brought car back to the dealer that originally did the recall repair, but they refuse to fix this issue as part of the recall and the manufacturer says the recall only covers this issue ONE time. The car has less than 55k miles on it, and it has only been 2 years since this recall repair was done (also, last year the car was hardly driven due to covid). The original recall covered several types of fords - so many car owners are unaware that this bushing will fail again. What recourse do consumers have when the recall repair does not fix this issue????

The Car is making a sloshing sound in the engine, runs hot and will lose power due to overheating. This happen to me, forcing me to exit off the interstate (thank goodness I was near an exit). The check engine light also came on. Once the car cooled down (approx 45min) I was able to street drive home and have never been able to drive the car since. The code the car displayed once checked was P302/P1299. After looking online discovering a manufacturing defect from Ford causing coolant intrusion with this vehicles engine, I then got the vehicle towed to the dealership thinking the TSB (technical service bulletin) would cover the repairs needed (new engine long block) but it does not per Ford. The dealer gave me an invoice for the repair of over $8,500. The engine (1.5L, 2.0L) has several TSB's because for this issue from Ford but NO recalls to replace the engine. There are multiple years and models affected (2014-2019, Fusion, Edge, MKZ). I currently have a car that I can't drive and can't get any help from Ford to resolve the manufacturing defect. I hope you all can provide some help by encouraging Ford to recall the engines.

The contact owns a 2015 Ford Fusion Energi. The contact stated that the engine control module failed to shutoff the vehicle causing the battery to drain. The contact was then unable to start the vehicle. The failure happened several times over a two-year period. The contact stated that to restart the vehicle he would break into the vehicle through the trunk to get to the battery and jumpstart the vehicle. The contact had taken the vehicle to the dealer and was informed that there was no recall associated with the VIN and that there were no known issues. The contact stated that the manufacturer knew about the issue but decided not to issue a recall. The manufacturer was made aware of the failure and confirmed that there was no recall associated with the issue. The contact was referred to NHTSA for assistance. The approximate failure mileage of 96,000. Consumer found a website explaining exactly what was happening with consumer's car was found on lenberglaw.com lemon law vehicles.

The contact owns a 2015 Ford Fusion. The contact stated that while driving at an undisclosed speed and making a turn, the horn inadvertently activated. The failure occurred on numerous occasions. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and referred the contact to file a complaint with NHTSA. The failure mileage was 92,620.

The engine leaks coolant into the cylinder, which causes repeated overheat warnings which completely disengage the throttle.

Driving in very heavy rain on I93 at about 40mph, exited highway, after about 5 miles, no power steering, many other functions stopped operating, limped into a parking lot, tried to reset everything by shutting off and back on, no change. Brought car to dealer, said they had to replace power steering unit, $2000. This happened when car was only two years old.