2016 FORD FUSION Complaints

The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 23V162000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated while driving 55-60 MPH and depressing the brake pedal, the brake pedal went all the way to the floorboard with a message displayed that the brake fluid level was low. The contact was able to veer to the side of the road. The vehicle was towed to an independent mechanic, where it was diagnosed that the front passenger's side brake hose was leaking and needed to be replaced. The vehicle was repaired. The contact later received a second notification of NHTSA Campaign Number: 23V162000 (Service Brakes, Hydraulic) advising that the part was available for the recall repair. The vehicle was taken to the dealer, where the front driver's side brake hose was replaced. Additionally, the dealer informed the contact that the brake lines were severely damaged. The contact also stated that while driving at various speeds and depressing the accelerator pedal, the vehicle hesitated to respond and made an abnormal loud sound. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 102,704.

The contact owns a 2016 Ford Fusion. The contact stated that while her daughter was driving at an undisclosed speed, the vehicle began to overheat, and the vehicle lost motive power. The contact's daughter was able to pull over to the shoulder of the roadway, where the vehicle was able to be restarted. The overheating warning light was illuminated. The vehicle was taken to the dealer, who diagnosed a general engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure, and a case was filed. The failure mileage was 150,000.

My trunk pops open by itself, without being activated. So far, if I keep my car locked, it will stay shut, but it has popped open while the vehicle was in motion. This is a safety hazard! It has been happening every day for the last several months.

The contact owns a 2016 Ford Fusion. The contact stated that while his son was driving at an undisclosed speed, the vehicle experienced rough driving with the check engine warning light illuminated. The contact stated that he had previously replaced the spark plugs and coils due to a cylinder #3 misfire. The vehicle was taken to the dealer, where it was diagnosed with coolant intrusion into the engine. The contact was informed that the engine long block needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 88,000.

On affected vehicles, the steering-wheel bolt may not maintain enough pressure, allowing it to loosen over time. As a result, the steering wheel may detach.

The contact owns a 2016 Ford Fusion. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The contact stated that the engine was idling rough with white smoke coming from the exhaust. The vehicle was towed to the dealer to be diagnosed. The contact was made aware of coolant intrusion into the engine. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to report the failure to the NHTSA Hotline. The failure mileage was approximately 158,000.

The contact owns a 2016 Ford Fusion. The contact stated while driving approximately 15 MPH, there was dark smoke coming from the exhaust pipe. The check engine warning light was illuminated. The vehicle was taken to a dealer where it was diagnosed that the engine needed to be replaced due to coolant leaking into the engine block. The contact stated believed that the vehicle was associated with an unknown recall. The manufacturer was notified of the failure. The failure mileage was 132,000.

Brake Booster Failed. No warning lights prior. I was driving when all of the sudden my brakes stopped working and brake pedal became very stiff and extremely hard to press down. I almost hit the car in front of me but fortunately was able to swerve on to the shoulder and had to take a right through a red light and was able to roll the car to a stop almost 40 yards further. I could have caused a severe accident. I see now there is recall for the same issue on F-150 trucks. I definitely think this needs to be a recall as I could have been severely inured or possibly fatally injured. My brakes do not work properly and the brake pedal is extremely hard to press down. The Ford dealership ran a diagnostic and stated, Replace engine camshaft, vacuum pump and related gaskets and hardware. Do not recommend driving vehicle until all repairs are performed. The vacuum pump is the brake booster pump recalled on other ford vehicles. This is a safety issue 100 percent as brakes suddenly stopped working at a high rate of speed not allowing driver proper stopping distance. My car is still not drivable because I can not properly brake at a safe stopping distance. It takes all my leg force just to start slowing down a tiny bit. This needs to be resolved right away.

The contact owns a 2016 Ford Fusion. The contact stated that the vehicle was at the dealer for a scheduled service appointment; however, the service could not be completed because the bolts were swollen. The contact was informed that the bolts for all four wheels needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to report the failure to the NHTSA Hotline. The failure mileage was approximately 22,545.

The contact owns a 2016 Ford Fusion. The contact stated while driving 35 MPH, the vehicle started to vibrate and would also vibrate at various speeds. The contact stated that the vehicle was idling rough at start-up. The contact stated that the check engine warning light was illuminated. The contact had taken the vehicle to an independent mechanic who diagnosed and determined that the spark plugs needed to be replaced and the fuel injectors needed to be cleaned. The vehicle had been repaired; however, the failure reoccurred. The contact took the vehicle to another independent mechanic and was advised that coolant had leaked into the engine block and the engine needed to be replaced. The vehicle had not been repaired. The manufacturer had been informed of the failure. The contact researched online and related the failure to TSB: 19-2139 - Coolant Intrusion into the Engine Block (Engine and Engine Cooling). The failure mileage was approximately 130,000.