2010 FORD FUSION Complaints
View complaints related to 2010 FORD FUSION. The complaints found here are submitted by actual consumers with first hand experience. There are more than 3,940 complaints submitted for the 2010 FORD FUSION. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.
-
2010 FORD FUSION- Louisville , KY
The power steering has failed. The dashboard showed these two phrases "Service Advancetrac" - yellow "Service power steering now" - red When that happened the first time the dealership was able to fix it under the customer satisfaction program by providing a module software update. But the issue happened again and I believe it is related to the 15V340 recall. I would like that to be investigated.
Source: NHTSA WEB SITE -
2010 FORD FUSION- Seattle , WA
There is a recall date on this car dating back 2021. I bought this car in 2024. The recall problems was never addressed or fixed. This had created an electrical error in the car, given no airbags, and windows do not roll, nor does it give accurate reads on tire pressure. Unbeknownst of all this, a tire popped nearly cause me to wreck on I-5 early 2024. I have documentation supporting the sale of the car, the replacement of tires, oil changes, repairs & towing incurred all on behalf of this car. I would not have bought it knowing there was a recall that was not addressed. This car is a rebuilt title that has been in accidents.
Source: NHTSA WEB SITE -
2010 FORD FUSION- LA GRANGE, KY
Car was checked for recall 15S34 and incorrectly determined to not have a problem. This recall deals with the gas tank cracking open. This car will pool gas on the ground under the car. Ford says since this was previously looked at, even if the determination was false, they will not take any action or help with it. Please assist - this is a known problem and should be repaired under the recall.
Source: NHTSA WEB SITE -
2010 FORD FUSION- Redford, MI
Hydrologic control and abs unit failed. Ford addressed the issue but did NOT include ever vin that was affected. Almost got into an accident and crashed when my brakes completely failed from a defective part. The problem has been confirmed by a independent service, no warning light or messages. Many other people with this issue that were not covered by the lackluster recall.
Source: NHTSA WEB SITE -
2010 FORD FUSION- Uniontown , PA
The steering wheel locks up. It happens when you make a sharp turn or when you turn on air conditioning a few minutes later steering locks. There has been a recall why wasn’t Ford Fusion included. If it was can I still get if repaired.
Source: NHTSA WEB SITE -
-
2010 FORD FUSION- Kansas City, MO
The contact called on behalf of the owner of a 2010 Ford Fusion. The contact stated that while the vehicle was being serviced, the owner was informed that the brake pads, calipers, and rotors were damaged and needed to be replaced. The vehicle was repaired. While the vehicle was having the emissions test performed, there was smoke coming from the front of the vehicle. The vehicle was taken to the dealer where it was diagnosed and determined that the brake lines were damaged and needed to be replaced. The vehicle was repaired. The contact stated that after investigating the failure, the vehicle owner related the failure to NHTSA Campaign Number: 19V904000 (SERVICE BRAKES, HYDRAULIC); however, the VIN was not included. The manufacturer was contacted and referred the contact to NHTSA Hotline to report the failure. The failure mileage was 148,550.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2010 FORD FUSION- JOHNS CREEK, GA
I have a 2010 Ford Fusion. Two days ago I was backing out of the parking lot and I had to brake hard to avoid a fast moving car zooming past behind me. After that I noticed the brake was very mushy and I have to press the brake almost to the floor to get the car to stop. I did some research on the internet and found out it was a common problem with Ford fusion between 2006 and 2010 and there is a safety recall 19S54 for the 2006-2010 Ford Fusion. Ford also has an internal Customer Satisfaction program 21N11 that covers the repair of the said issue. However, the recall only covers cars manufactured between February 22, 2006 through July 15, 2009 and my car was manufactured in Dec 2009 and was not included on the recall list. Obviously the problem was not fixed for Ford Fusion manufactured after the 7/15/2009. I have seen many similar complaints on the net and some have indicated that they have filed NHSTA complaints for the same issue. I contacted Ford and see if they will fix the problem with my car as a goodwill gesture even though my car was not on the recall list. They absolutely refused to take responsibility. I think it is a serious, serious safety issue for the driving public and Ford should be told to extend the 19S54 recall cut off date to cover any vehicle that experienced this ABS/HCU braking problem and fix this manufacturing defect.
Source: NHTSA WEB SITE -
2010 FORD FUSION- Harvry, LA
My brakes failed but I had them changed twice and that wasn’t the problem I had the cylinder change and still no brakes when I bought it it had some issues with the brakes going to the floor
Source: NHTSA WEB SITE -
2010 FORD FUSION- Baton Rouge, LA
Unknown, I was driving in my wheel stop moving , it’s saying now power steering wheel, for my breaks, it keep saying check brake system
Source: NHTSA WEB SITE -
2010 FORD FUSION- University Place, WA
I got a letter from ford awhile ago about my brakes. I brought it in then they stated I was fine. But you have to push my brake peddle all the way to the floor of the car to make my vehicle stop. I feel this is VERY UNSAFE for me and my family, And also others around me if something where to happen do to this problem. We have done multiply things to try to correct the problem with no luck.
Source: NHTSA WEB SITE