2010 FORD FUSION Complaints

View complaints related to 2010 FORD FUSION. The complaints found here are submitted by actual consumers with first hand experience. There are more than 3,940 complaints submitted for the 2010 FORD FUSION. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.

  • 2010 FORD FUSION
    - Bristol, CT

    My brakes felt mushy for a couple days. Next day br a ke fluid dash light came on. brake fluid was so low couldn't see it. Went to autozone bought brake fluid .dot 3 per internet. Internet went on to share the fact thi s p r oblem was recalled. I h a v e none open says major safety problem tow xar immediately.im on s t at e assistance i can't pay to fix

    Source: NHTSA WEB SITE
  • 2010 FORD FUSION
    - Savannah, GA

    We have had multiple issues with the ABS and HCU since we bought this car used a couple years ago. We've replaced the ABS Module and HCU and had Ford reprogram it and are still having issues. The brakes go out fully and I went through a red light. The ABS and Traction control and check brake system lights come on. We've spent a couple thousand dollars trying to fix this issue. The brakes have gone out before this incident as well around 95k miles and intermittently since. If needed, contact for invoices.

    Source: NHTSA WEB SITE
  • 2010 FORD FUSION
    - Stillwater, OK

    The contact owns a 2010 Ford Fusion. The contact stated that while driving approximately 65 MPH, the vehicle became difficult to maneuver and failed to return to normal operation. The advancetrac warning light was illuminated and the "Power Steering Fault" and "Advancetrac Failure" messages were displayed on the instrument panel. The manufacturer was notified of the failure. The failure mileage was approximately 130,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2010 FORD FUSION
    - Altus, OK

    The contact owns a 2010 Ford Fusion. The contact stated that while driving 70 MPH, the vehicle experienced a loss of power steering assist. The traction control warning light was illuminated. The contact decelerated and pulled over to the side of the road. The vehicle was turned off and restarted. The vehicle resumed normal operation. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 120,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2010 FORD FUSION
    - POPE, MS

    I was driving my car down the road and all the sudden I couldn't steer my car It caused me to go off the road and hit a ditch

    Source: NHTSA WEB SITE
  • 2010 FORD FUSION
    - Pearland, TX

    The ABS Hydraulic Control Unit (HCU) failed internally due to a stuck valve. The component remains on the vehicle and is available for inspection upon request. While braking normally on a public road, the vehicle hit a minor road bump, causing the ABS to momentarily engage. Immediately following the bump, the brake pedal lost all hydraulic resistance and dropped severely to the floorboard. The vehicle experienced an immediate, drastic reduction in stopping power and an extended braking distance, nearly causing a collision. This sudden loss of braking capability puts the driver, passengers, and other motorists at immediate risk of a severe accident. There were absolutely no warning lamps, error messages, or symptoms prior to hitting the road bump. The braking system functioned completely normally until the exact moment the ABS was triggered by the uneven road surface. The vehicle and its components have not been inspected by the manufacturer, police, or insurance representatives. This identical safety-compromising failure mode (loss of pedal pressure immediately following ABS activation on a bump) is a thoroughly documented defect covered by Ford under Safety Recall 19S54 and Customer Satisfaction Program 21N11. However, because this specific vehicle has a production date falling just outside of Ford's arbitrary manufacturing window (which cut off on July 15, 2009), the vehicle is barred from receiving the safety remedy. This vehicle uses the exact same layout and suffers from the exact same dangerous safety defect. The NHTSA needs to investigate and force an expansion of the vehicle build dates for this recall before this known defect causes a fatal crash.

    Source: NHTSA WEB SITE
  • 2010 FORD FUSION
    - Tualatin, OR

    The contact owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The contact depressed the brake pedal to stop the vehicle. Several warning lights were illuminated. The vehicle was taken to the dealer where it was diagnosed with an ABS module failure. The contact was informed that the ABS module needed to be replaced. The vehicle was not repaired. The dealer made two attempts to replace the part with an aftermarket part. The ABS module was shipped out for the repair; however, the dealer was informed that the part could not be repaired. The vehicle was not repaired. The vehicle was towed to the residence. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The manufacturer was made aware of the failure. The failure mileage was approximately 53,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2010 FORD FUSION
    - Euless, TX

    The 2010 Ford fusion has 2584 complaints the second highest from 2010 to 2014; mine has been giving me intermittent issues for 3 years now and some times there is no error code and inspection cannot find anything wrong- but for 2010 year their has been none even though those years are the same generation car. Thats not fair stopping at 2011-the 2010 is the same car with the same issue-issue a recall; people are getting these expensive repairs and the issue comes back sometimes!!! Give us the same recall for the same car!!! 2010: (2584 complaints) 2011: (500) 2012: (3000) 2013: (2000) 2014: (1000) Your recall does not encompass the whole generations years; agian the same car as the 11's to14's

    Source: NHTSA WEB SITE
  • 2010 FORD FUSION
    - Idaho falls, ID

    Steering wheel will not turn. Tried to reset but that did not work. Mechanic diagnosed it as a power steering rack failure. Steering rack needs to be replaced.

    Source: NHTSA WEB SITE
  • 2010 FORD FUSION
    - Murrieta, CA

    I was rear ended while parked at a stop light, the force of the impact drove me into the vehicle in front of me. During the accident my seatbelt pretensioner failed to work at the same time my sun visor unexpectedly dropped down swung towards me and my head struck the edge of the visor which made a gash in my forehead down in between my eyes, there was blood visibly running down my nose at the scene of the accident. I went to the ER afterwards to seek medical attention. 3 days after the accident i suffered a seizure, i have no prior seizures before this incident. Since the accident i’ve continued to have headaches, signs of short term memory loss, and having trouble finding words sometimes.

    Source: NHTSA WEB SITE